3D print a snap fit case for an Adafruit Perma-Proto board. Perfect for using with an Adafruit Feather. Secures a full or half-size PermaProto PCB without any screws. Easy to make with free-support 3D printing.
Learn Guide:
https://learn.adafruit.com/permaproto-feather-case/
YouTube Video:
https://youtu.be/Yg3TnB2MLnw
Adafruit Feather M4 Express
https://www.adafruit.com/product/3857
Half-Size Perma-Proto
https://www.adafruit.com/product/1609
Full-Size Perma-Proto
https://www.adafruit.com/product/1606
Mini Toggle Switch
https://www.adafruit.com/product/1609
DC Jack
https://www.adafruit.com/product/610
2-wire JST female connector
https://www.adafruit.com/product/261
2-wire JST male connector
https://www.adafruit.com/product/3814
10-wire ribbon cable
https://www.adafruit.com/product/3890
Feather Female Headers
https://www.adafruit.com/product/2886
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
