Description

Vacuum double glazing (VDG) is gaining attention as one of the most advanced solutions for improving home insulation, reducing energy bills, and increasing comfort. While traditional double glazing has been the go-to choice for decades, vacuum technology takes performance a step further, making it particularly appealing for energy-conscious homeowners and those in colder or noisier environments.

Learn more at: https://vacuum-glass.com/

What Is Vacuum Double Glazing?

Vacuum double glazing is a type of insulating glass unit (IGU) made up of two panes of glass separated by a microscopic gap—usually around 0.1 to 0.3 millimeters—filled with a near-perfect vacuum. Unlike conventional double glazing, which uses air or inert gases like argon between panes, the vacuum layer eliminates almost all conductive and convective heat transfer.

To maintain the gap between the panes, tiny spacers (often nearly invisible) are used. The edges are hermetically sealed to keep the vacuum intact, and a small getter material is sometimes included to absorb any stray gas molecules that could leak in over time.

How It Works

Heat transfer through windows happens in three main ways: conduction, convection, and radiation.

• Conduction is the direct transfer of heat through solid materials.
• Convection happens when a fluid—like air or gas—circulates and moves heat.
• Radiation is the emission of infrared energy from a warmer surface to a cooler one.

The vacuum gap in VDG effectively eliminates conduction and convection because there is no air or gas to carry heat. Low-emissivity (Low-E) coatings on the glass further reduce radiation losses. This combination makes vacuum glazing exceptionally efficient, often with thermal performance comparable to or better than thick triple glazing, but without the bulk.

Advantages of Vacuum Double Glazing

1. Superior Thermal Insulation
   U-values (a measure of heat transfer) for VDG can be as low as 0.4–0.6 W/m²·K, significantly better than standard double glazing’s typical 1.2–1.6 range. This means less heat escapes in winter and less unwanted heat enters in summer.
2. Slim Profile
   Because the gap is so small, VDG units can be as thin as a single pane of glass. This makes them ideal for retrofitting into heritage or period window frames where thick units would be unsuitable.
3. Excellent Acoustic Insulation
   The vacuum barrier also blocks sound transmission, making it a great choice for homes near busy roads, railways, or airports.
4. Energy Savings
   Reduced heat loss translates to lower heating bills in winter and reduced air-conditioning costs in summer, helping to offset the initial investment over time.
5. Condensation Resistance
   With the inside glass surface staying warmer in cold weather, condensation is much less likely to form.

Potential Drawbacks

No technology is perfect, and vacuum double glazing does come with considerations:

• Higher Cost: Manufacturing is more complex, so prices are often higher than standard double glazing.
• Availability: Not all glaziers offer VDG yet, so choice of suppliers may be limited.
• Edge Temperature: Because the vacuum seal is concentrated at the edges, those areas can be slightly less insulating than the center of the pane.

Applications

Vacuum double glazing isn’t only for residential use. It’s also valuable in:

• Heritage building retrofits, where original frames need to be preserved.
• Commercial buildings looking for improved energy performance without altering the façade.
• Cold climate regions where heat retention is critical.