Description

2:12 Myth 1: When you have a screw gate carabiner in the vertical axis you must always have it so the gate opening is at the bottom.

5:30 Myth 2: When you have two carabiners connected to the same thing the gates need to be opposite and opposed.

11:00 Myth 3: How you load webbing into an offset D carabiner.

15:18 Myth 4: No metal on metal.

21:58 Myth 5: Stay with dedicated main and dedicated belay and don't use TTRS because of edge transitions.

39:30 If something doesn't make sense, is 'why' a bad question to ask?

Links:

22:28 Mike Gibbs and Kevin Koprek - Two Tension or not to Tension: https://riggingforrescue.com/wp-content/uploads/2019/03/Two-Tension-or-Not-to-Tension.pdf

22:28 2015 ITRS Mike Gibbs - Mirrored Systems: http://itrsonline.org/wordpress/wp-content/uploads/2015/11/ITRS-2015-Gibbs-Paper-Final.pdf

Join the Conversation

Please email us with questions or comments about this topic at podcast@cmcpro.com

Important Warning:

• Many of the activities discussed in this podcast pose a very substantial risk of serious injury or death.
• Products and techniques discussed in this podcast are intended for use by specially trained professionals.
• Technical rescue, rappelling, climbing and the training involved are very hazardous activities. Each situation has its own unique conditions and must be evaluated by those present. Effective risk management comes from experience, proper training and good personal judgment.
• CMC is not liable for any damages arising from abuse or improper use of the techniques or equipment discussed in this podcast.
• Topics discussed are the ideas and opinions of each individual.
• Department protocol and regulations should always take precedence.