Franklin Christensen - Podcast Details

Shows

Amateur3DPodSeason 2 TrailerIf you like what you hear you can subscribe to our podcast through your platform of choice and get new episodes as they become availablePlease join us in our Facebook group, Amateur3DPodYou can email us at panelists@amateur3dpod.comYou can also reach us individually at Franklin, Kevin, Andy, or Chris @amateur3dpod.comThe transcripts, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-09-0804 min

Amateur3DPodSeason 1 FinallyIf you like what you hear you can subscribe to our podcast through your platform of choice and get new episodes as they become availablePlease join us in our Facebook group, Amateur3DPodYou can email us at panelists@amateur3dpod.comYou can also reach us individually at Franklin, Kevin, Andy, or Chris @amateur3dpod.comThe transcripts, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/ As specified in the episode, here is our CAD episode 2024-09-081h 19

Amateur3DPodInjection MouldingIf you like what you hear you can subscribe to our podcast through your platform of choice and get new episodes as they become availablePlease join us in our Facebook group, Amateur3DPodYou can email us at panelists@amateur3dpod.comYou can also reach us individually at Franklin, Kevin, Andy, or Chris @amateur3dpod.comThe transcripts, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-09-011h 20

Amateur3DPodDrive Ins and ArcadesIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become availablePlease join us in our Facebook group, Amateur3DPodYou can email us at panelists@amateur3dpod.comYou can also reach us individually at Franklin, Kevin, Andy, or Chris @amateur3dpod.comThe transcripts, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-08-251h 11

Amateur3DPodRedesigned Bluetooth ControllerWe do not advise printing parts that will need to be heat resistant.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-08-181h 22

Amateur3DPodNot oranges, tangentsWe do not advise printing parts that will need to be heat resistant.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-08-1154 min

Amateur3DPodMinimalismIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-08-041h 37

Amateur3DPodKevin keeps getting confused for background noiseIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-07-281h 39

Amateur3DPodFrank is a modern Major GeneralIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-07-211h 05

Amateur3DPodRockets and ExplosionsKevin Becomes a DIY Guy.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-07-141h 37

Amateur3DPodWhere'd andy go?If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-07-0734 min

Amateur3DPodChris and Andy are unchaperonedIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-06-301h 04

Amateur3DPodBizarre Printer recoveryEpisode information If you like what you hear, you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-06-231h 08

Amateur3DPodGone FishingWe've got two dead Gnome weeks in a row... Gotta get it together Frank!If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-06-161h 08

Amateur3DPodAndy and his hairspraySay something funny for the micIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-06-091h 19

Amateur3DPodThe Grass is greener on Andy's PrinterIt looks like it's supposed to be there.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-06-021h 28

Amateur3DPodDo BetterFeaturing the Singer-songwriter, Guitar Player, Pidginholed BardIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-05-2633 min

Amateur3DPodDrop your rotary toolKevin got glitter contaminationIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-05-191h 03

Amateur3DPodIf it ain't broke don't fix itAm I reusing episode titles or am I just sleep deprived?You can find Frank's Thingivers designs at https://www.thingiverse.com/franklinchristensen/designs whenever he gets them up anyway.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com....2024-05-1251 min

Amateur3DPodButter is not a health foodA cocktail fork!You can find Frank's Thingivers designs at https://www.thingiverse.com/franklinchristensen/designs whenever he gets them up anyway.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can...2024-05-0555 min

Amateur3DPodChris needs more volumeGlobal Parameters are always fun!You can find Frank's Thingivers designs at https://www.thingiverse.com/franklinchristensen/designs whenever he gets them up anyway.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai...2024-04-2850 min

Amateur3DPodKevin does not listen to alternativeMaybe Hairspray is not the answer...If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-04-211h 15

Amateur3DPodStretching the MetaphorTo save our files, or not to save our files. That is the question.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-04-1456 min

Amateur3DPodCamping with your 3D printerKevin didn't talke about 3D printing, therefore it was beneath Andy to remember him going.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/tr...2024-04-071h 39

Amateur3DPodIt's the Andy Show!Andy's screw rod is mounted at the topIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-03-3144 min

Amateur3DPodHer name is RheadekoolusleahlaunghAndy needs to screw up a donut so he can print a rockIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-03-2458 min

Amateur3DPodChris' Nozzle Identifies as a heat breakWe need four panelists...If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-03-1744 min

Amateur3DPodPickstikkelgrikkelstringJokers to the left of me, Marbles to the right. Here I am!If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-03-101h 15

Amateur3DPodGod prints with 100% infillJust when you thought it couldn't get any worse, we all became sheep.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-03-031h 38

Amateur3DPodMr Surprises adventure in classWho knew teching young people was so exhaustingIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-02-251h 22

Amateur3DPodBuild a centrifugeSoftware Demonstrations are even worse than you've heard in person.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-02-181h 04

Amateur3DPodString Filament CheeseWe're not obsessed with cheese, we're just curious about printing with it.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-02-111h 06

Amateur3DPodAndy is an EmpathDon't laugh at Chris. That would be rude.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-02-041h 14

Amateur3DPodThe Ballad of Andy's ElegooAndy finally unboxed his SLA printer, and has Many questionsIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-01-281h 19

Amateur3DPodKevin's special brownies are full of plasticAndy keeps losing his knobsIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-01-211h 32

Amateur3DPodOur Benchy doesn't floatChris needs a really small funnelIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-01-141h 21

Amateur3DPodLimited Excitement EnergyKevin's character may be included in printable files, eventually, with his bookIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2024-01-071h 20

Amateur3DPodNew Years 2023-24If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-12-3106 min

Amateur3DPodChristmas 2023Merry Christmas! If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-12-2403 min

Amateur3DPodStick a spoon in me I'm doneWe touched on printing dice since Kevin wasn't here to weigh in.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-12-171h 14

Amateur3DPodPrinting with chocolate milk is AWESOME!Chris helped Andy realize he can make Jesus Toast without the use of his printer... after the outro.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://am...2023-12-1059 min

Amateur3DPodGo big plastic, or go homeScrapergate or big plastic. Thanksgiving is at fault.If you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-12-0331 min

Amateur3DPodAds are brokenKevin's FEP finally failed for the first time since last christmas because of his subber spatulaIf you like what you hear you can subscribe to our podcast through your platform of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.co...2023-11-2656 min

Amateur3DPodI don't want to be a busy manIt's alive! IT'S ALIVE! Frank can now print!If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-11-191h 03

Amateur3DPodAndy in the Jaba Slayer CostumeThere's a half hindless horse running around out there... somewhere.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-11-1355 min

Amateur3DPodSous Vide d'EscargotWhat do you do when you are getting overwhelmed by snails? Cook 'em. Duh.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-11-051h 32

Amateur3DPodKind of terrifying and kind of awesomeA torsoless horseman on a headless horse will haunt my drems for a while now. Thanks Kevin.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dp...2023-10-291h 28

Amateur3DPodQuadruple amputee pegasusNo pannelists were harmed in the recording of this podcast.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-10-2259 min

Amateur3DPodChris is now a canaryFrank is so boring that Chris keeps falling asleepIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.The transcript, written by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-10-151h 10

Amateur3DPodDon't use your computer's cup holders at the same timeAnd the word not to google this episode is PurulentIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.he transcript, mostly generated by Open Ai's Whisper, can be found at https://amateur3dpod.com/transcripts/2023-10-0850 min

Amateur3DPodWe are not Accordion speakersI'll see your too long episode and raise you a too short episode.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/tr...2023-10-0151 min

Amateur3DPodAndy's almost ready to use his printer agian"Who knew? The dragon at the store is only absurd from a hobbyists perspective." FrankIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dp...2023-09-241h 25

Amateur3DPodFrank didn't stop usChris has a great sword handle for his Headless Horseman costumeIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/transcripts/2023-09-171h 24

Amateur3DPodKevin didn't stop usWe went long and it was all because Kevin wasn't here to stop us.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.co...2023-09-101h 44

Amateur3DPodKnitting SpaghettiAndy's fan controller reigns supreme, but division takes too longIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/transcripts/2023-09-031h 31

Amateur3DPodChris Soo fell asleepAndy's breadboard doesn't have enough jam to keep Chris awakeIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/transcripts/2023-08-2757 min

Amateur3DPodEasier to put it on than take it offSLA Waffles. No! Bigger is not better. No! The job is never done!If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/tr...2023-08-201h 05

Amateur3DPodDucting and other considerationsThe balad of Andy's HeatblockIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/transcripts/2023-08-1359 min

Amateur3DPodWallet FixationChris dreams of riding a firetruck on a track designed by Andy's son... or something like that.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at ht...2023-08-061h 00

Amateur3DPodDon't clean your carpet with your sucky printerAndy's button batteries need a way to charge. We've confirmed that the Spear probably came before the bow... but this may require a time machineIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by O...2023-07-301h 08

Amateur3DPodThe topic to avoid is FrankThe rose shaped dragon Frank found for Valentine's Day was for sale at the grocery store!If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://am...2023-07-2349 min

Amateur3DPodAndroid Healer thingAndy's rockets were a uccess and Kevin has some extra android... healer... things...If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/tr...2023-07-161h 10

Amateur3DPodIndependence Free SpaceWe didn't record over Independence Day weekend, but so you don't feel left out Chris has a story about home made FountainsIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, y...2023-07-0907 min

Amateur3DPodRecyclingWe are testing a more organic topic... Let us know how we did.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/tr...2023-07-0241 min

Amateur3DPodHome improvements from the printerPaint 3D is working better than Andy could have hoped, but we got distracted by the Bank of Dad... Worth it!If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you c...2023-06-251h 10

Amateur3DPodGet the most from your printerAndy's son is learning to design in Paint 3D while he arranges to use every spare gram.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at ht...2023-06-181h 04

Amateur3DPodPrinted ToolsAndy's washer and dryer peer pressure eachother into failing, and his fish get anxiety... At least we agree that Toothless shouldn't look like StitchIf you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open A...2023-06-1148 min

Amateur3DPodIntended ValueHow did Frank forget Feeler Gauges? Tram, don't level! Andy is trying to avoid keeping his fish in hot water and more‽If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you...2023-06-041h 10

Amateur3DPodMeasurement StrategiesHow is it that a fully constrained drawing in your CAD program relates to how you measure the subject? We don't know either. Probably.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open A...2023-05-281h 20

Amateur3DPodPrinting For MoldsAndy's on Vacation, so Frank and Chris decided to contend for the most words in his absence.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at ht...2023-05-2141 min

Amateur3DPodProject or PurchaseAndy's minibus has ADHD... or something. Kevin is printing figurines and Frank is NOT printing legos.If you like what you hear you can subscribe to our podcast through your vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://am...2023-05-141h 06

Amateur3DPodColors! Pretty pretty colorsKevin accidentally marbled a rock base, Chris is working through some 2D printing, and Andy has fitured out how to increase his print space... finally.If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's W...2023-05-071h 13

Amateur3DPodScrew Threads! Degrees of confidenceAndy has finally finished the props for James and the Giant Peach! Metric has become the US standard despite the best efforts of Congress! and more!If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open A...2023-04-301h 19

Amateur3DPodFamily requests and reactionsKevin shares the epic adventures of configuring his new FDM printer, and "Air Quotes" was the rest of the story... except when we found the topic that is.If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written b...2023-04-231h 03

Amateur3DPodMaterial StorageBuckets and Power Supplies and Brown Bottles oh my! If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available.You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.comIf you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com.For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/transcripts/2023-04-1659 min

Amateur3DPodHappy EastyEnjoy your respective Pagan fertility rituals y'all If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.com If you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com. For the transcript, written by Open Ai's Whisper, you can find it at https://amateur3dpod.com/transcripts/2023-04-0901 min

Amateur3DPodFree Space Just in case there was any confusion on the subject. We don't know what we're doing... Like ever. If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.com If you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com. For the transcript, written by Open A...2023-04-021h 07

Amateur3DPodGarbage filament and ResinThis week Andy's woes revolve around tightening Delrin wheels with an eccentric bearing. Also, English kind of sucks as a language. If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.com If you prefer to reach out individually, you can do that at Franklin, Kevin, Andy, or Chris @amateur3dpod.com. For the transcript, written by...2023-03-261h 10

Amateur3DPodSupportsWould you like to print yarn? We brainstorm ideas on this, and a few punny thoughts as we approach our topic. Kevin violated Andy's "Print something every week" expectations, and Chris printed a link cup that has nothing to do with the Zelda games. If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.com If you prefer to...2023-03-191h 19

Amateur3DPodFun Toys GamesIn this episode we talked about AI and Printing SLA print-in-place upside down and a chemical solvent that can be used to melt for bonding or smoothing TPU. We also circled back on the S word a couple of times... For some reason. Action Figures, Game Pieces, and Statues are not toys! If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at...2023-03-121h 01

Amateur3DPodRoboticsWe had a guest panelist, Carl Ballard, this week. We talked about Andy's Phone Case woes and making his printer do things it's not designed to do. Kevin rushed a dragon so he'd have something to talk about. Chris is printing light switch covers If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.com ...2023-03-051h 00

Amateur3DPodThings you should not do with your printerDon't make toast... or use the printer as a boat anchor... or to print a ball hitch. Don't drink SLA resin, or use a 3D printed gun, or use an SLA printer for a food container. If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod (https://www.facebook.com/groups/450405783403557/), Or you can email us at panelists@amateur3dpod.com If you prefer to reach out individually you can...2023-02-261h 21

Amateur3DPodHindsight SolutionsAndy has made progress on upgrading his fish tank pump impeller and Kevin has gotten down to printing mini-figures for his D&D game night. Frank and Andy dig deep into first layer height and Z-Axis control. Chris likes to re-purpose electrons, and our perspective hot-end configurations lead us off the rails. If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod (https://www.facebook.com/groups/450405783403557/), Or...2023-02-191h 24

Amateur3DPodUnexpected solutionsChris unintentially prints things that work in unexpected places. Andy unexpectedly upgrades when stuff is broken. Kevin unexpectedly prints new tools. Frank unexpectedly conforms to manufacturer's recommended operating temperatures. And more... If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group, Amateur3DPod, Or you can email us at panelists@amateur3dpod.com If you prefer to reach out individually you can do that at Franklin, Kevin, Andy, or Chris...2023-02-121h 13

Amateur3DPodTable LevelingWe went on a side quest for discussing supports, but in true Amateur 3D Pod fassion, we eventually came back around on Table Leveling, including the process Kevin uses for his SLA printer, and several strategies for FDM tables with variances in build plate surface and the personal preference of the operator. If you like what you hear you can subscribe on your podcast vendor of choice to get new episodes as they become available. You can find us in our Facebook group Amateur3DPod, Or you can email us at panelists@amateur3dpod.com 2023-02-051h 16

Amateur3DPodgCodeIn this week's episode we discussed the file format our printers read. For SLA it seems there's a lot of machine specific files that resemble a slide deck with light exposure times. FDM printers on the other hand use a command sequence inherited from automated reductive machining. It's not easy to modify the SLA files after they have been created. gCode files on the other hand are almost too easy to update. We also discussed some ideas for post processing, strategies for keeping files sliced for a variety of build media separate, and C...2023-01-281h 16

Amateur3DPodThere! I fixed it.Andy uses his printer to fix everything, including a project we all contributed to when he was the only one that had a printer. From rollercoasters to sink fixtures somebody has done it. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.c...2023-01-221h 25

Amateur3DPodBio RepresentativeThis week we talked about using a 3d printer to create prosthetics, casts, and braces... eventually. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2023-01-151h 03

Amateur3DPodMaterials and PropertiesIn this episode we discussed some alternate materials for both SLA and MDF printers, and some of the properties. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2023-01-081h 08

Amateur3DPodNew Intro and OutroWe improvised a quick get together to wish everyone a happy new year and to present our new theme music. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2023-01-0104 min

Amateur3DPodMerry Christmas 2022Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2022-12-2501 min

Amateur3DPodExtruder TypesWe all learned something new about Kevin's M-SLA printer, and discussed nuts and bolts of FDM extruder categories. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2022-12-181h 19

Amateur3DPodCare and MaintenanceHow do we care for and maintain our respective printers? There's (perhaps) surprisingly not a lot required to keep your printer is good shape, but we covered everything we could think of, including a few dos and don'ts. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin...2022-12-111h 06

Amateur3DPod3D in engineeringSome family members who are in professional Engineering positions agreed to discuss their thoughts on 3D in their respective fields, and in their lives. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2022-12-0443 min

Amateur3DPodCAD softwareThis week Andy and I discussed CAD software and why we're such big fans of it's use. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2022-11-2758 min

Amateur3DPodFunctional PrintsThis episode we talk about functional prints that we have worked on and applications to daily life that we use our printers to create. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2022-11-201h 08

Amateur3DPodBed Plate AdhesionThis episode we discussed the wide world of getting parts to stick properly to your build plate, and our process on how we got to where we are now. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us collectively at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy@amateur3dpod.com.2022-11-131h 08

Amateur3DPodSoftwareWe explore the variety of software we use for CAD and modelling, for slicing, and resources for collecting prints designed by other creators or to learn from their experience. Subscribe on your podcast system of choice to get new episodes as they become available. To get the script from Andy that will insert retractions in longer lines email him at andy@amateur3dpod.com To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us with feedback or topic ideas you can reach us...2022-11-0659 min

Amateur3DPodLessons LearnedIn this episode we talk about lessons we've learned, or for some reason we regularly fail to learn, about process and printing. For instance, Kevin goes in deep on the value of a good SLA resin exposure finder. Subscribe on your podcast system of choice to get new episodes as they become available. To join the conversation come visit our Facebook group Amateur3DPod If you would like to email us you can reach us at panelists@amateur3dpod.com, or individually at franklin, kevin, chris, or andy...2022-10-3055 min