Shows
Hands On Hands OffSMT, Bias, and the Future of Manual Therapy Education with Dr. Casper NimIn this episode of Hands On, Hands Off, we dive deep into the largest systematic review on SMT to date with researcher and chiropractor Casper Glissmann Nim. What he and his team discovered may shake the very foundation of manual therapy education and clinical practice.We explore:Whether SMT is more effective than placebo or non-recommended therapiesWhy the way you perform SMT might not influence patient outcomesHow contextual factors and therapeutic alliance play a bigger role than we once thoughtThe implications for fellowship training and manual therapy educationWhat the future holds for low back pain research...2025-04-0937 minHands On Hands OffSMT, Bias, and the Future of Manual Therapy Education with Dr. Casper NimIn this episode of Hands On, Hands Off, we dive deep into the largest systematic review on SMT to date with researcher and chiropractor Casper Glissmann Nim. What he and his team discovered may shake the very foundation of manual therapy education and clinical practice.We explore:Whether SMT is more effective than placebo or non-recommended therapiesWhy the way you perform SMT might not influence patient outcomesHow contextual factors and therapeutic alliance play a bigger role than we once thoughtThe implications for fellowship training and manual therapy educationWhat the future holds for low back pain research...2025-04-0937 min
工作熊聊電子製造EP022-板子SMT後電測正常，整機組裝後發現主板死機我們這次要討論的主題，是一位苦主在SMT的論壇上面貼出的求助的帖子，苦主說他們家的產品，在PCBA階段正常測試的時候還是好的，可一到了整機組裝成品測試時，卻發現主板有問題，開不了機，印象中工作熊之前好像也有分析過類似的帖子。
《部落格相關文章》
✅如何使用[2D X-Ray]來判斷BGA有否空焊、虛焊、雙球現象？ https://www.researchmfg.com/2010/08/bga-solder-skip-identification/
✅Youtube:可以依據X-ray來進行BGA失效模式分析嗎？ https://www.researchmfg.com/2024/07/bga-defect-detect-by-x-ray/
✅如何在SMT測溫板上正確埋設BGA錫球的測溫線(TC)? https://www.researchmfg.com/2021/09/setup-tc-for-bga/
✅如何選擇決定SMT回焊測溫板上的測溫點？最高溫、最低溫點 https://www.researchmfg.com/2021/09/smt-thermalcouple-locations/
✅SMT回焊爐加氮氣(N2)的優缺點探討 https://www.researchmfg.com/2018/08/n2-reflow/
✅整理SMT回焊爐添加氮氣(N2)對各種焊接不良的影響與效果
https://www.researchmfg.com/2022/03/n2-affect-solder-defect/
✅PCB板彎板翹發生的原因與防止的方法 https://www.researchmfg.com/2014/11/pcb-warpage-cause-solution/
✅何謂玻璃轉化溫度(Tg, Glass Transition Temperature) https://www.researchmfg.com/2016/08/tg-glass-transition-temperature/
✅為何產品執行燒機(B/I)也無法攔截到DDR虛焊的問題？ https://www.researchmfg.com/2015/04/b-i-detect-ddr-hip/
《相關YouTube影片》
🛠️EP001 片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️EP002 BGA虛焊失效模式可以使用X-ray分析嗎？ https://youtu.be/S-Pzfe4-wrY
🛠️EP003 屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️EP004 波焊製程為何容易發生焊錫拉尖的問題？ https://youtu.be/-U1JLpGbAxE
🛠️EP005 焊錫(Soldering) vs. 焊接(Welding)的差異 https://youtu.be/ZzkWzSP-BBE
🛠️EP006 網友求助問：SMT焊點表面出現一層顆粒狀金屬球是什麼？ https://youtu.be/0A8Ge42XyzM
🛠️EP007 SMT回焊前為何要先量測溫度曲線 https://youtu.be/U8QexEkFY1s
🛠️EP008 SMT回焊：什麼是RSS曲線？什麼又是RTS曲線？兩者又各有何優缺點？ https://youtu.be/Aq87c8jt5kw
🛠️EP009 SMT回焊溫度曲線發生平移、飄移、抖動、溫度短暫抬升是怎麼一回事？https://youtu.be/7UqiWB853_I
🛠️EP010 什麼是CAF電路板內層微短路、導電性陽極細絲物？ https://youtu.be/iXQq2xzT_-U
🛠️EP011 你知道什麼是打叉板(cross-out boards)？打叉板會影響SMT2025-03-1714 min
Awakening: Bhagavatham (by Master EK)Gratitude and Part 1: Bhagavatam - Original ReadingSmt. Malladi Lakshmi Prasanna extends her gratitude to all those who made this podcast possible. Part 1: Bhagavatam - Original Reading2024-09-1716 min
工作熊聊電子製造EP014-SMT或波焊的熱應力(thermal stress)是否造成BGA錫裂?工作熊這次要跟大家討論一個網路論壇上網友提出來關於「熱應力是否會造成BGA錫裂?」的問題。網友貼出了一張BGA焊錫做完紅墨水染色試驗後的照片，照片中明顯可以看得出來，有一顆錫球出現有染紅的現象，表示該錫球的焊錫應該是有破裂的現象。
《部落格相關文章》
✅簡介用紅墨水試驗 (Red Dye Penetration Test)查看BGA焊錫有否破裂 https://www.researchmfg.com/2010/11/red-dye-penetration-test/
✅紅墨水染紅測試分析(Red Dye Pry Test)的允收標準 https://www.researchmfg.com/2012/01/penetration-accept-criteria/
✅如何看懂實驗室的BGA紅墨水測試報告測試報告的深層意義 https://www.researchmfg.com/2017/06/lab-bga-red-dye/
✅何謂CTE(熱膨脹係數)？α2-CTE又是什麼？CTE如何影響電路板品質 何謂CTE(熱膨脹係數)？α2-CTE又是什麼？CTE如何影響電路板品質 https://www.researchmfg.com/2016/04/bga-nwo/
✅電子零件掉落或BGA錫裂一定是SMT製程問題迷思(1)？錫裂只是應力大於結合力之必然結果 https://www.researchmfg.com/2018/02/solder-crack-study-01/
✅何謂IMC (Intermetallic Compound)？IMC與PCB焊接強度有何關係？IMC厚度有IPC標準？ https://www.researchmfg.com/2014/03/soldering-strength-imc/
✅BGA虛焊NWO(Non-Wet-Open)形成的原因及可能解決方法
✅SMD和NSMD焊墊設計的區別、優缺點與使用時機建議 https://www.researchmfg.com/2019/11/smdnsmd/
✅為了對抗錫球裂開，BGA焊墊應該設計成SMD或NSMD？SMD與NSMD的優缺點 https://www.researchmfg.com/2018/09/smd_nsmd/
✅實驗比較SMD與NSMD焊墊設計推球及拉力測試對BGA錫裂的影響 https://www.researchmfg.com/2018/10/shear-pull-bga-ball/
《相關YouTube影片》
📌BGA發生錫裂一定是焊錫問題嗎？錫裂原因與解決方法探討 https://youtu.be/86kZikEaaxk
📌BGA錫裂一定是焊錫問題嗎(II)？PCBA包含有那些結合力 https://youtu.be/Xz6fT4g4gMw
🛠️EP001 片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️EP002 BGA虛焊失效模式可以使用X-ray分析嗎？ https://youtu.be/S-Pzfe4-wrY
🛠️EP003 屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️EP004 波焊製程為何容易發生焊錫拉尖的問題？ https://youtu.be/-U1JLpGbAxE
🛠️EP005 焊錫(Soldering) vs. 焊接(Welding) 的差異 https://youtu.be/ZzkWzSP-BBE
🛠️EP006 網友求助問：SMT焊點表面出現一層顆粒狀金屬球是什麼？ https://youtu.be/0A8Ge42XyzM
🛠️EP007 SMT回焊前為何要先量測溫度曲線 https://youtu.be/U8QexEkFY1s
🛠️EP008 SMT回焊：什麼是RSS曲線？什麼又是RTS曲線？兩者又各有何優缺點？https://youtu.be/Aq87c8jt5kw
🛠️EP02024-09-1111 min
The Dale Jr. DownloadMid-Season Superlatives, And Is SMT Data A Good Thing For NASCAR?Carla Gebhart is joined by The Athletic's Jordan Bianchi to break down a NASCAR hot topic: SMT data. Why do you keep hearing about it? What is it? Should SMT data be available to drivers and teams during a race? How does that impact competition? Randall Burnett, crew chief of the No. 8 car at Richard Childress Racing, joins to offer his perspective on SMT data sharing and whether it helps or hurts in providing the best racing. Plus, it's time to announce our mid-season superlatives! Carla and Jordan give their selections, and we highlight the fa...2024-06-0757 min
工作熊聊電子製造EP011-你知道什麼是打叉板(cross-out boards)？打叉板會影響SMT的產出效率嗎？這次要跟大家討論的主題是，有網友在論壇上詢問關於「Cross-out boards」的問題，工作熊這裡先將「Cross-out boards」翻譯為「打叉板」，等說完了網友提問的內容，我們再來解釋，什麼是「Cross-out boards」、打叉板？
《相關YouTube影片》
🛠️片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️BGA虛焊失效模式可以使用X-ray分析嗎？ https://youtu.be/S-Pzfe4-wrY
🛠️屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️波焊製程為何容易發生焊錫拉尖的問題？ https://youtu.be/-U1JLpGbAxE
🛠️網友求助問：SMT焊點表面出現一層顆粒狀金屬球是什麼？ https://youtu.be/0A8Ge42XyzM
🛠️SMT回焊前為何要先量測溫度曲線 https://youtu.be/U8QexEkFY1s
🛠️SMT回焊：什麼是RSS曲線？什麼又是RTS曲線？兩者又各有何優缺點？ https://youtu.be/Aq87c8jt5kw
🛠️什麼是CAF電路板內層微短路、導電性陽極細絲物？ https://youtu.be/iXQq2xzT_-U
《部落格相關文章》
🛠️名詞解釋：什麼是Cross-out boards、X-out boards、打叉板 https://www.researchmfg.com/2017/02/cross-board/
--
Hosting provided by SoundOn 2024-06-0313 min
工作熊聊電子製造EP009-SMT回焊溫度曲線發生平移、飄移、抖動、溫度短暫抬升是怎麼一回事？我們在使用測溫板量測SMT的回焊溫度時間曲線時，經常會在溫度曲線的回焊區前後，而且幾乎都是在錫膏熔點附近，發現有溫度平移，甚至是短暫抬升的現象，這是測溫板製作有問題？還是什麼原因造成這種現象的呢？
《相關YouTube影片》
🛠️片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️BGA虛焊失效模式可以使用X-ray分析嗎？ https://youtu.be/S-Pzfe4-wrY
🛠️屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️波焊製程為何容易發生焊錫拉尖的問題？ https://youtu.be/-U1JLpGbAxE
🛠️網友求助問：SMT焊點表面出現一層顆粒狀金屬球是什麼？ https://youtu.be/0A8Ge42XyzM
🛠️SMT回焊前為何要先量測溫度曲線 https://youtu.be/U8QexEkFY1s
🛠️SMT回焊：什麼是RSS曲線？什麼又是RTS曲線？兩者又各有何優缺點？ https://youtu.be/Aq87c8jt5kw
《部落格相關文章》
🛠️深入了解錫膏(solder paste)及助焊劑(flux)組成對電子組裝的品質影響 https://www.researchmfg.com/2013/04/solder-paste/
🛠️回流焊的爐溫曲線應該使用RSS(馬鞍)型?還是RTS(斜昇)型? https://www.researchmfg.com/2018/02/rss-rts/
🛠️SMT回流焊的溫度曲線(Reflow Profile)解說與注意事項 https://www.researchmfg.com/2010/07/reflow-profile/
🛠️SMT回焊溫度曲線中回焊區前後熔點附近溫度會有短暫停頓平移或抬升是什麼原因？ https://www.researchmfg.com/2022/11/smt-reflow-profile-drift/
🛠️如何選用正確黏貼材質來固定測溫頭於SMT回焊測溫板 https://www.researchmfg.com/2021/10/sticking-tc-solutions/
🛠️
--
Hosting provided by SoundOn 2024-05-1308 min
工作熊聊電子製造EP008-SMT回焊：什麼是RSS曲線？什麼又是RTS曲線？兩者又各有何優缺點？這次專門來討論「SMT回焊時為何需要量測溫度曲線？什麼是RSS曲線？什麼又是RTS曲線？兩者又各有何優缺點？」主題。RSS與RTS這兩個溫度曲線的最大差異，就是RSS會有一段幾乎是恆溫的吸熱區，而RTS則沒有。另外，RTS在回焊爐內加熱的整體時間，通常會比RSS來得短，相對地也就比較節省能源。但是，並不是所有的板子都可以走RTS溫度曲線。你知道為什麼嗎？
《相關YouTube影片》
🛠️片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️BGA虛焊失效模式可以使用X-ray分析嗎？ https://youtu.be/S-Pzfe4-wrY
🛠️屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️波焊製程為何容易發生焊錫拉尖的問題？ https://youtu.be/-U1JLpGbAxE
🛠️網友求助問：SMT焊點表面出現一層顆粒狀金屬球是什麼？ https://youtu.be/0A8Ge42XyzM
🛠️SMT回焊前為何要先量測溫度曲線 https://youtu.be/U8QexEkFY1s
《部落格相關文章》
🛠️深入了解錫膏(solder paste)及助焊劑(flux)組成對電子組裝的品質影響 https://www.researchmfg.com/2013/04/solder-paste/
🛠️回流焊的爐溫曲線應該使用RSS(馬鞍)型?還是RTS(斜昇)型? https://www.researchmfg.com/2018/02/rss-rts/
🛠️SMT回流焊的溫度曲線(Reflow Profile)解說與注意事項 https://www.researchmfg.com/2010/07/reflow-profile/
--
Hosting provided by SoundOn 2024-05-0612 min
The All Things Nintendo PodcastLatest Switch 2 Rumors, SMT V: Vengeance Preview, TMNT Arcade ReviewThis week on All Things Nintendo, Brian starts the show answering listener questions before being joined by Spencer Pressly, host of the SMT Network podcast. Together, they talk about the latest news, including a new batch of Switch 2 rumors, before transitioning to a preview of Shin Megami Tensei V: Vengeance and a review of TMNT Arcade: Wrath of the Mutants.
If you'd like to follow Brian on social media, you can do so on his Instagram/Threads @BrianPShea or Twitter @BrianPShea. You can follow Spencer and the SMT Network podcast on Twitter: @SMTNetwork.
You can al...2024-05-032h 21
工作熊聊電子製造EP007-SMT回焊前為何要先量測溫度曲線這次要來跟大家討論的主題是「SMT回焊時為何要先量測溫度曲線？」一般傳統的回焊溫度曲線，大多採用RSS(Ramp-Soak-Spike)溫度曲線，也就是升溫-吸熱-回焊曲線，我們通常都會叫它「馬鞍式」回焊曲線，因為這條曲線的形狀看起來就像是一個可以扶手的馬鞍，或許你沒有真正見過馬鞍，所以無法想像，不然你就把它想像成是一匹側站在你面前，頭朝著右邊，尾巴朝左的草泥馬好了，草把泥馬尾巴的地方看作是溫度曲線開始升溫的地方，馬背則是一段平穩的溫度區域，而脖子到頭頂則是進入最高溫的回焊區域，再之後就是溫度急速下降的冷卻區。
《相關YouTube影片》
🛠️片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️BGA虛焊失效模式可以使用X-ray分析嗎？ https://youtu.be/S-Pzfe4-wrY
🛠️屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️波焊製程為何容易發生焊錫拉尖的問題？ https://youtu.be/-U1JLpGbAxE
🛠️網友求助問：SMT焊點表面出現一層顆粒狀金屬球是什麼？ https://youtu.be/0A8Ge42XyzM
《部落格相關文章》
🛠️深入了解錫膏(solder paste)及助焊劑(flux)組成對電子組裝的品質影響 https://www.researchmfg.com/2013/04/solder-paste/
🛠️回流焊的爐溫曲線應該使用RSS(馬鞍)型?還是RTS(斜昇)型? https://www.researchmfg.com/2018/02/rss-rts/
🛠️SMT回流焊的溫度曲線(Reflow Profile)解說與注意事項 https://www.researchmfg.com/2010/07/reflow-profile/
--
Hosting provided by SoundOn 2024-04-2910 min
工作熊聊電子製造EP006-SMT焊點表面出現一層顆粒狀金屬球是什麼？這次跟大家討論的主題是「SMT回焊後在焊點表面出現許多顆粒狀金屬球的現象」。這個案例是一位苦主在國外論壇上貼出來的幾張關於SMT焊接後的照片，苦主說明他們家生產了一批板子，在SMT回焊後發現焊點的表面出現有一層顆粒狀的金屬球，看起來有點像雞皮疙瘩，用鑷子輕輕一刮，顆粒就可以被輕易刮掉，再用鑷子推焊點及零件焊腳則推不動，所以，苦主認為焊點強度應該是OK的(存疑)。
工作熊個人對這個問題的看法比較傾向是《葡萄球現象》或稱為《葡萄球錫珠現象》，英文為《Graping Solder》，因為嚴重的時候，不良現象看起來就會像是一串串堆疊在一起的葡萄。
《相關YouTube影片》
🛠️片式電容零件頂部偶發焊錫短路問題討論 https://youtu.be/DYAh0BE17yU
🛠️BGA虛焊失效模式可以使用X-ray分析嗎？https://youtu.be/S-Pzfe4-wrY
🛠️屏蔽罩下BGA本體破裂案例分析 https://youtu.be/-2RZtpcHgZ8
🛠️波焊製程為何容易發生焊錫拉尖的問題？https://youtu.be/-U1JLpGbAxE
《部落格相關文章》
🛠️什麼是SMT葡萄球錫珠現象(Graping Solder)？該如何解決？ https://www.researchmfg.com/2020/11/smt-graping/
🛠️深入了解錫膏(solder paste)及助焊劑(flux)組成對電子組裝的品質影響 https://www.researchmfg.com/2013/04/solder-paste/
🛠️回流焊的爐溫曲線應該使用RSS(馬鞍)型?還是RTS(斜昇)型? https://www.researchmfg.com/2018/02/rss-rts/
🛠️SMT回流焊的溫度曲線(Reflow Profile)解說與注意事項 https://www.researchmfg.com/2010/07/reflow-profile/
🛠️整理SMT回焊爐添加氮氣(N2)對各種焊接不良的影響與效果 https://www.researchmfg.com/2020/11/smt-graping/
--
Hosting provided by SoundOn 2024-04-2212 min
The Chiropractic Forward Podcast: Evidence-based Chiropractic AdvocacySMT And Cauda Equina & SMT And DiscectomyCF 326: SMT And Cauda Equina & SMT And Discectomy Today we’re going to talk about SMT And Cauda Equina & SMT And Discectomy But first, here’s that sweet sweet bumper music
Purchase Dr. Williams’s book, a perfect educational tool and chiropractic research reference for the daily practitioner, from the Amazon store TODAY!
OK, we are back and you have found the Chiropractic Forward Podcast where we are giving evidence-based chiropractic a little personality and making it profitable. We’re not the stuffy, elitist, pr...2024-04-1818 min
Chiropractic Forward PodcastSMT And Cauda Equina & SMT And DiscectomyCF 326: SMT And Cauda Equina & SMT And Discectomy Today we’re going to talk about SMT And Cauda Equina & SMT And Discectomy2024-04-1816 min
Global SMT PodcastGunter Lauber describes his new role as Chief Stragy Officer at ASMPTApproximately one year now Gunter Lauber moved up from leading the SMT Solutions Team as their CEO to become the Chief Strategy Officer for the entire group, while still acting as the chairman of the SMT Team. He tells Trevor Galbraith about his new role and his plans for the future.2024-03-2709 min
Scraping Bits#64 - Palina Tolmach: Smart Contract SMT Formal Verification, Symbolic Execution & FuzzingDive into the intricate world of smart contract security and formal verification techniques in episode 61 of the Scraping Bits Podcast with your host DeGatchi. Joining him is the esteemed expert Palina, as they unravel the complexities of smart contract symbolic execution, SMT formal verification, and fuzzing techniques.In this enlightening episode, Palina shares her deep insights into the cutting-edge methods employed to ensure the robustness and security of smart contracts deployed on blockchain networks. From symbolic execution strategies that uncover hidden vulnerabilities to SMT formal verification techniques that rigorously validate contract logic, listeners will gain invaluable knowledge...2024-03-1458 min
Scraping Bits#61: Smart Contract SMT Formal Verification, Symbolic Execution & Fuzzing - Ft. Palina TolmachDive into the intricate world of smart contract security and formal verification techniques in episode 61 of the Scraping Bits Podcast with your host DeGatchi. Joining him is the esteemed expert Palina, as they unravel the complexities of smart contract symbolic execution, SMT formal verification, and fuzzing techniques.In this enlightening episode, Palina shares her deep insights into the cutting-edge methods employed to ensure the robustness and security of smart contracts deployed on blockchain networks. From symbolic execution strategies that uncover hidden vulnerabilities to SMT formal verification techniques that rigorously validate contract logic, listeners will gain invaluable knowledge...2024-03-0732 min