Shows
The BootloaderDrop the beat - with guest John ParkIn this episode, Tod and Paul welcome John Park to the show. They discuss a floppy disk MIDI boombox, live-coding music, RP2350 as a mini-computer, and more.
Follow the show on Mastodon or Bluesky.
Show Notes
00:00 Intro
Joséphine Wolf Oberholtzer, creator and maintainer of Supriya
00:54 Floppy Disk Midi Boomboxes (John #1)
Vintage:
Roland MT-80S
Roland MT-300S
Yamaha MDP-10
DIY:
MIDI Blaster by Luke.the.maker and build instructions and pre-built
MT-420 by Jonas Bengtson
9:04 AlgoRave (Tod #1)
DJ_Dave:
Instagram reels:
https://www.instagram.com/p/DL0P...2025-08-0432 minThe BootloaderThe rant and the love letterTod and Paul discuss a MIDI chip, an epic rant, a love letter, and more.
Follow the show on Mastodon or Bluesky.
00:00 Welcome
00:17 SAM2695 General MIDI chip
Seeed XIAO MIDI
M5stack w/ speaker
M5stack w/ MIDI in/out
DIYElectroMusic articles
SAM2695 datahsheet
Tod demo on Adafruit Show-n-Tell
3:51 Supercollider and Supriya
Supercollider synth engine
Supriya Python API
Supriya subreddit
5:47 The STM32 rant
12:18 A love letter to embedded engineering
Prof. V. Hunter Adams’ November 2023 lecture, “Why I love building things with microcontrollers.”
16:10 Alternate music keyboard layout...2025-07-0722 minThe BootloaderRated PG for LanguagePaul and Tod discuss tariffs, desoldering tricks, a classic arcade game, and more.
Follow the show on Mastodon or Bluesky. Follow Paul on Mastodon or Bluesky. Follow Tod on Mastodon or Bluesky.
For detailed show notes and transcripts, visit TheBootloader.net
Show Notes
00:00 Welcome
00:17 Tarriffs are Bullshit
6:00 Desoldering Tricks
10:21 Philips Fixables
12:45 Resurrecting Sinistar
15:36 Kiwix
17:56 Euroknob
21:40 Wrap-up2025-06-0221 min
The CircuitPython ShowJustin MyersIn the final episode of season 5, Justin Myers joins the show. Justin shares how he created the new connectionmanager library for networking in CircuitPython.
Follow the show on Mastodon or Bluesky for news of when the show will return.
Show Notes
00:00 Intro
00:21 Justin’s start with computers
1:11 Discovering electronics
2:15 Discovering CircuitPython
3:02 ConnectionManager
4:55 How does connectionmanager work?
7:10 What were the challenges in creating connectionmanager?
8:35 Software testing framework
11:21 Which board?
13:25 Wrap-up2025-05-1913 minThe BootloaderI'm Afraid it's TRMNLWelcome to a new episode! Tod and Paul chat about woodworking, MP3 players, a CircuitPython synthio tutorial, and more.
Follow the show on Mastodon or Bluesky.
00:00 Intro
00:12 Hyperwood
2:34 Synology NAS devices
7:27 TRMNL WiFi ePaper display
11:29 Rockbox 4.0
Paul incorrectly stated 2022 as the year of the first Rockbox release. It’s 2002 and we regret the error.
13:02 CircuitPython synthio tutorial
16:05 mobygratis
18:13 Wrap-up2025-05-0518 minThe CircuitPython ShowCooper DalrympleCooper Dalrymple, who recently was a guest on the Audio Effects Panel Discussion, joins the show. He shares how he got started with electronics, his music background, what’s next for CircuitPython’s audio effects, and more.
00:00 Welcome
00:26 Cooper’s start with computers and electronics
1:31 Discovering CircuitPython
5:57 Cooper’s music background
8:18 Designing hardware
13:26 Advantages between CircuitPython and Arduino
19:03 What’s next in audio effects?
21:41 Learn more about Cooper
Tindie Store
YouTube
GitHub
23:02 Which board?
24:04 Wrap-up2025-05-0524 minThe CircuitPython ShowDesigning Games for CircuitPython with Tim "foamyguy" CocksTim Cocks, better known as foamyguy in the Adafruit community, shares his experiences in designing games for CircuitPython. Tim and Paul also discuss some recent games Tim has worked on.
00:00 Intro
00:16 Tim’s start with computers
1:48 Discovering CircuitPython
8:16 Challenges designing games for microcontrollers
13:16 1D Chomper
15:44 Blinka Says
18:58 Karel the Robot
23:24 Which microcontroller?
25:42 Wrap-up2025-04-2126 minThe BootloaderWelcome Andy PiperAndy Piper joins Tod and Paul and they discuss an open source laptop, 3D printing filament detection, synths, and more.
Visit Andy’s homepage
Check out TheBootloader.net for detailed show notes and transcript.
Follow us on social media:
Andy Piper on Mastodon or Bluesky
Paul Cutler on Mastodon or Bluesky
Tod Kurt on Mastodon or Bluesky
00:00 Intro
00:59 Glance app
5:33 Soundfonts, General MIDI, and a ROMpler
11:55 OpenSpool and SpoolEase
15:39 MNT Pocket Reform
21:55 DIYR Design Lamps and Speaker
25:20 Podcast Later...2025-04-0728 minThe CircuitPython ShowAudio Effects Panel DiscussionCooper Dalrymple, Jeff Epler, Mark Komus, and Tod Kurt join the show to discuss the new audio effects available in CircuitPython.
00:00 Welcome
00:19 Mark’s inspiration for adding audio effects
1:46 Mark’s drum gist
4:23 The new audio effects available in CircuitPython
8:02 LFOs
10:30 Synthio vs Audio Effects
11:36 MP3 Bass and Treble Control
12:48 The RP2350
17:34 RP2350 vs RP2040
18:11 Audio on Espressif
19:50 Guitar pedals
26:59 Future projects
29:59 CircuitPython Karaoke
30:42 CircuitPython Audio Effects Tricks
32:38 Wrap-up2025-04-0733 minThe CircuitPython ShowProject Collaboration with Liz Clark and Noe RuizLiz Clark and Noe Ruiz join the show and share how they collaborate on projects, where they get inspiration, and share some of their favorite projects.
Follow the show on Mastodon or Bluesky.
Show Notes
00:00 Intro
00:21 Project inspirations
4:17 Iterating on a project
6:09 Working together to improve a project
8:01 Noe’s favorite project - Adabot
9:41 Liz’s favorite project - the Midi Fighter
11:00 The MX Guitarr
15:12 The The CircuitPython Motorized Camera Slider
17:09 The Jack-o-lantern PropMaker
19:24 The NFC...2025-03-2429 minThe CircuitPython ShowWriting a CircuitPython Library for the Community BundleJan Goolsbey and Tod Kurt return to the show and share their experience in writing libraries and drivers for the CircuitPython Community Bundle.
Follow the show on Mastodon or Bluesky and join our newsletter.
Guests:
Jan Goolsbey - Jan’s GitHub repositories
Tod Kurt Tod’s GitHub repositories
00:00 Welcome
00:18 The CircuitPython Community Bundle
2:01 When is your code is ready for the bundle?
2:50 Creating a library using cookiecutter
Creating and sharing a CircuitPython library Learn Guide
9:01 Documentation requirements
11:15 Submitting a library to the Community Bund...2025-03-1034 minThe BootloaderWelcome Brent RubellFollow the show on Mastodon or Bluesky and join our newsletter
Check out TheBootlader.net for detailed show notes, links, and transcript.
Brent Rubell of Adafruit Industries joins Tod and Paul. They discuss the Wippersnapper IoT firmware, Arduino libraries, microcontrollers as mini-computers, and more.
Show Notes
00:00 Welcome
00:27 Wippersnapper’s new offline mode
Wippersnapper Learn Guide
5:36 rp2040 speed update
Hackster coverage
9:19 Microcontrollers as mini-computers
[SlimeDeck[(https://www.youtube.com/watch?v=rnwPmoWMGqk)
*Adafruit Fruit Jam
14:14 Obsidian note taking app
17:44 Arduino library bots...2025-03-0326 minThe CircuitPython ShowBuilding CircuitPython with Dan HalbertCircuitPython core developer Dan Halbert joins the show and shares how to build CircuitPython from source.
Dan was previously a guest on episode 28.
Follow the show on Mastodon or Bluesky and join our newsletter.
00:00 Intro
00:24 When would someone want to build CircuitPython?
2:23 The pre-requisites for building CircuitPython and the Building CircuitPython Learn Guide
5:15 Building for different hardware ports using git submodules
6:46 Usage of Python in the build process and virtual environments
9:11 Asking for help in the Adafruit Discord
9:34 Adding a new...2025-02-2421 minThe CircuitPython ShowDesigning a PCB with Bradán LaneWelcome to a new episode of The CircuitPython Show! Bradán Lane joins the show for a second time and shares his process, tips, and tricks for designing a PCB that uses CircuitPython.
We’re now on Bluesky!
00:00 Welcome
Bradán Lane homepage
Bradán on The CircuitPython Show episode 19
00:24 Recommended tools
EasyEDA
KiCad
2:54 Where to start when designing a board?
4:24 Finding open source hardware examples and schematics
Adafruit
Solder Party
7:02 Designing a board to support CircuitPython
9:00 The board layout and its constraints
12:28 Creat...2025-02-1030 minThe BootloaderBamboozledPaul and Tod discuss drama in the world of 3D printing, oscilloscope music, inventory management for makers, and more.
Follow the show on Mastodon or Bluesky and sign up for ad-free, spam-free, tracking-free monthly newsletter.
Show Notes
bamboozle: To deceive or dupe; hoodwink. synonym: deceive.
00:00 Welcome
00:14 Drama in the world of 3D printing
Bambu Firmware Update Introducing New Authorization Control System
The Verge coverage
8:36 Oscilloscope music
Tutorials and how-to links
Oscilloscope Music
13:00 ucritair
15:50 Buchla and friends
19:02 Inventory management for makers
2025-02-0322 min
Scene Mom SaysScene Mom Says: AI, Spotify Deals, and Sir PaulTime: ~31 min.
It’s Episode 46! This week I dive into the latest music industry news, including Paul McCartney’s concerns about AI, and the return of Bandcamp Fridays. Featuring an incredible lineup of indie artists like Camille Sledge and Black Viiolet, this episode also delivers a dose of music history, marketing tips for musicians and creatives, and a discussion on the 2025 Oscar nominations. Tune in for promotion insights, artist spotlights, and all things independent!
LINKS:
SIGN UP FOR THE NEWSLETTER!
Get your merch! Thank you for supporting the show and indie artist...2025-01-3031 minThe CircuitPython ShowBuilding a weather system with Jan GoolsbeyJan Goolsbey joins the show for his second visit. He shares how he built a weather monitoring system using sensors, weather APIs, display devices, CircuitPython, and Adafruit IO.
Jan was previously a guest on episode 33.
The CircuitPython Show is now on Bluesky!
Show Notes
00:00 Intro
00:16 Welcome Jan
00:28 The start of the weather system
2:09 How to solve the corrosion problem
4:50 Internet connected sensors with a PyPortal and Adafruit IO
7:43 Adding external weather conditions from an API to Adafruit IO
9:47 Evolving...2025-01-2731 minThe CircuitPython ShowAaron PendleyThe CircuitPython Show returns! To kick off season five, Paul welcomes Aaron Pendley, who is known by squid.jpg in the Adafruit community. They discuss how Aaron got started with computers, how he discovered CircuitPython, and a number of his projects.
Follow the show on Mastodon or Bluesky.
Show Notes
00:25 Welcome Aaron and his start with computers
4:23 squid.jpg
5:18 Discovering CircuitPython
8:03 The Top-Secret Lunchbox
12:11 The Zapper lights / sound mod
16:24 The Wii Nunchuk USB Adapter
17:22 The WiFi Matrix Keypad Remote
20:02...2025-01-1323 minThe BootloaderSunsets, Synths, and Pinball!Happy New Year! Tod and Paul are back, each with three things to share. They discuss sunsetting a popular IDE, Tod’s favorite synth (which does so much more), 3D printing, pinball, and more.
We’re now on Bluesky! Follow us on Bluesky or subscribe to our newsletter.
Visit The Bootloader.net for detailed show notes, links, transcripts, and more.
00:00 Welcome
00:19 Sunsetting Mu
3:23 The Synthstrom Deluge
9:11 Home Assistant Voice (Preview Edition)
12:13 The Sound of Logic: Klangorium
15:50 3D Printing News Round-up
A 4D axis...2025-01-0623 minThe BootloaderSupercon 2024Tod and Paul discuss the recent Hackaday Supercon. They share some of their favorite talks, the Supercon badge, and notable add-ons for the badge.
For detailed show notes, including pictures, visit TheBootloader.net. And while you’re there, sign up for our newsletter!
00:00 Welcome
00:25 What is Supercon?
3:23 The Supercon badge
5:25 Supercon badge simple add-ons
6:44 The 2024 Supercon badge
7:16 Tod’s simple add-on, the touchwheel SAO
10:03 Conference talks overview
10:35 Giving Robotic Friends a Voice (Paul #1)
12:59 CircuitGraver (Tod #1)
15:17 Solving the Last...2024-12-0229 minThe BootloaderWelcome Kevin Santo CappuccioWelcome to the show
For detailed show notes and a transcript, visit TheBootloader.net
Join our newsletter! Keep up with the show and what Paul and Tod are up to. Visit The Bootloader’s newsletter page to browse the archives or subscribe.
Welcome to our second guest, Kevin Santo Cappuccio, the creator of Jumperless.
6:20 The UNO Plus+ (Kevin #1)
The UNO Plus+ from John Loeffler is what the Arduino UNO should’ve been all along. It’s the same shape and hardware as the Arduino UNO, with the added bonus of LED...2024-11-0429 min
Paul Stuart Mixes and PodcastsPaul Stuart - Do You Know House 2024 #10 - 26th October 2024Hi All. Here is my latest House mix, with new vocal releases by MissFly & David Bailey, Ann Nesby, Melchyor A, 2fox & BB James Ft Liam Bailey, David Morales, Franck Roger Ft Rona Ray and 10th Street Assembly, with deeper grooves from Abacus, Frits Wentink and Rob Redford & Mona Bode plus promo pressure from Pat Bedeau Ft Anna-Marie Johnson, LCGC Ft Annette Bowen, Jullian Gomes & Kuniyuki Takahashi Ft Sio and 4 tracks from the Vega Records ADE 2024 release as well as vintage grooves by Jon Cutler Ft Vanessa Freeman and Jovonn & DJ Deep, all in 2 hours of ace HOUSE music, enjoy th...2024-10-272h 10The BootloaderWelcome Liz ClarkPaul and Tod welcome their first ever guest, Liz Clark aka BlitzCityDIY. They chat about the itsaSNAP iOS app from Adafruit, the new Raspberry Pi AI camera, maker skill trees, and more.
Join our newsletter! Keep up with the show and what Paul and Tod are up to. Visit The Bootloader’s newsletter page to browse the archives or subscribe.
Show Notes
00:25 Adafruit itsaSNAP iOS App (Liz #1)
I have to say I’m a little biased with this pick because I contract with Adafruit, but I’m mildly obsessed with the new it...2024-10-0725 minThe BootloaderFrom Arcade to SynthWelcome to a new episode of The Bootloader. For detailed show notes and transcripts, check out TheBootloader.net. Join our new newsletter or check out the archives.
00:00 Welcome
00:26 Recap: The Bootloader live on CircuitPython Day
3:00 MICRORACK (Tod #1)
08:16: Pimoroni’s Picade Max (Paul #1)
Paradise Arcade Shop
13:17 A bug in the Raspberry Pi RP2350 (Tod #2)
Hackster article
18:36 Stratasys sues Bambu Lab (Paul #2)
Ars Technica
Tom’s Hardware - Is Bambu being targeted for being successful?
22:18 Wrap-up2024-09-0222 minThe BootloaderTeardown 2024 with Debra AnsellIn this episode of The Bootloader, Paul and Tod are joined by Debra Ansell who recaps Teardown 2024. Tod and Paul share a few interesting things including the Tulip Creative Computer, code editors, metal 3D printing, and more.
Stay until the end for a special announcement about CircuitPython Day on August 16, 2024.
For detailed show notes, transcripts, and to join our newsletter, visit The Bootloader.net
00:28 Interview with Debra Ansell
Tod and Paul are joined by Debra Ansell (geekmomprojects on Instagram and Mastodon). Debra recaps her experience at the recent Teardown 2024 conference hosted by Crowd...2024-08-0530 minThe BootloaderFour Topics and an InterviewPaul and Tod chat about Professor Gallaugher’s CircuitPython tutorial videos, Embedded Swift, a special interview with Justin Myers, the author of the new CircuitPython ConnectionManager library, and more.
For detailed show notes and transcripts visit The Bootloader.net
Show Notes:
00:21 CircuitPython videos by Professor John Gallaugher
Professor Gallaugher interview on The CircuitPython Show
Professor Gallaugher’s YouTube channel
CircuitPython playlist
Raspberry Pi Pico tutorials using CircuitPython
Bluefruit School - using a CircuitPython Bluefruit and tutorials
Use PyCharm with CircuitPython on macOS video
Easily install or upgrade CircuitPython Libraries with Circup video
4...2024-07-0124 minThe BootloaderBeautiful Bezier CurvesIn episode 9, Paul and Tod chat about the M5Stack Cardputer, RadioFreeFedi, migrating to Kicad, the CircuitPython Online IDE, and more.
For detailed show notes, visit TheBootloader.net.
00:00 Welcome
00:20 The M5Stack Cardputer - Tod #1
2:10 CircuitPython build for the Cardputer
2:40 Available from Electromaker.io
4:29 RadioFreeFedi.net - Paul #1
5:57 FediVision
6:20 Bandcamp Friday / Faircamp Friday
6:48 Faircamp static site generator
8:19 Moving from Eagle to Kicad - Tod #2
9:55 PlumPot YouTube channel with Kicad tutorials
11:16 What is the most challenging...2024-06-0326 minThe BootloaderBuilt from the ground upIn this episode, Paul and Tod each share three interesting things from learn to solder kits to programming ARM in assembly and more. Visit TheBootloader.net for more information including detailed show notes and transcripts.
00:22 Meet the Maker: Carrie Sundra of Alpenglow Industries. (Paul #1)
1:29 SMT Garden - surface mount soldering kit
3:51 Building a synthesizer with the Daisy Seed from Electrosmith (Tod #1)
5:56 synthUX Academy classes on YouTube
8:08 Microdot web framework for MicroPython (Paul #2)
9:08 Programming for both CPython and CircuitPython or MicroPython
10:25 ARM Assembly Deep-dives by Carlynorama...2024-04-2929 minThe BootloaderThe CircuitPython 9 Release Show00:00 Welcome to The Bootloader
00:22 What are we excited about in CircuitPython 9?
00:56 jpegio and the Memento Camera
AdaBox 21 Unboxing Video
2:12 The one downside of JPEG vs. BMP or PNG
3:03 How Adafruit is innovating around the hardware and software
3:57 bitmapfilter image effects
4:28 USB Host
5:07 Keyboards on USB Host
Scott’s CircuitPython2024 blog post
7:12 MicroPython and merging its changes into CircuitPython
Split heap memory management
9:55 paralleldisplaybus
LilyGO microcontrollers
8x faster display using paralleldisplaybus for ESP32
12:13 CIRCUITPY on Android
13:28 ESP-IDF software de...2024-03-2222 minThe CircuitPython ShowPaul CutlerIt’s the final episode! Tod Kurt returns and serves as guest host and interviews Paul. Paul shares how he started with open source, his favorite project, exciting things coming to CircuitPython, and more.
00:00 Welcome
00:40 How Paul first got started with computers
1:45 Paul’s start with open source
5:10 Learning Python
Talk Python training courses
6:38 Discovering CircuitPython
8:50 Paul’s favorite CircuitPython project
SilverSaucer.com
13:22 Exciting things coming to CircuitPython
Memento Camera
USB host
Scott Shawcroft’s CircuitPython 2024 blog post
16:34 What would Paul like to see in C...2024-01-2920 minThe CircuitPython ShowJeff EplerCircuitPython core developer Jeff Epler joins the show. He and Paul discuss how he sees his role as a core developer, adding JPEG support to CircuitPython, and adding over 2000 new fonts.
00:27 Welcome Jeff and his start with computers
00:54 How Jeff started with open source
1:45 Discovering CircuitPython
2:12 Jeff’s role as a CircuitPython core developer
3:43 Retro computing
The Commordion: linusakesson.net
4:43 The Memento camera and JPEG support in CircuitPython
7:17 Adding over 2000 new fonts to CircuitPython
adafruit/circuitpython-fonts: A collection of PCF-format fonts packaged for easy us...2024-01-1512 minThe CircuitPython ShowDebra AnsellDebra Ansell joins the show and shares how she started with computers and electronics, the Orb-sessed LED Sphere, the PixelBlaze Pillow, and more.
00:30 How Debra started with computers and electronics
2:50 Creating the Orb-sessed LED Sphere
5:08 How CircuitPython helped with the project
The Seeed XIAO Sense nRF52840
7:11 Combining maker skills
LED Tote Bag Back to the Future
8:27 The PixelBlaze Pillow
The PixelBlaze controller
10:32 The WiFI Hot Spot LED Jacket
12:43 Where to learn more about Debra’s projects
Geekmomprojects.com
Make Magazine
Instagram
Mastodon: @geekmomprojects@mastodon.so...2024-01-0114 minThe CircuitPython ShowJan GoolsbeyJan Goolsbey joins the show. He and Paul discuss the CircuitPython Community Bundle, Jan’s contributions to the bundle, his IoT wind chimes project, and the string car racer.
Transcripts are available in most podcast players.
00:30 Welcome Jan
2:24 Discovering CircuitPython
3:52 CircuitPython’s Community Bundle
6:10 Jan’s favorite libraries in the Community Bundle: Range Slicer
7:45 Graphics libraries including PaletteFader
9:27 Advice for adding to the CircuitPython Community Bundle
10:30 Using synthio for the Internet of Things Wind Chimes project
Wind Chimes repository
14:14 The String Car Ra...2023-12-1822 min
Blues From The Ouse with Paul Winn, Ben Darwin and Angie Howe.#206 Blues from The Ouse on Jorvik Radio with Paul Winn, Ben Darwin & Angie Howe 06.12.23Featuring...FOG Blues & Brass Band - Too DeepBob Corritore - Nine Times Out Of TenEmma Wilson Music UK - See You In The MorningBywater Call - Sweet MariaSaverio Maccne - No One Does That Magic Like YouSaverio Maccne - She Was A WonderJohnny Mars + The Cold Heart Revue - Mary & Joseph Are On The RoadThe Doors - Roadhouse BluesJohn Lee Hooker - One Bourbon, One Scotch, One BeerBad Company - Whiskey BottleLittle Walter - Don't Need No HorseDAVY KNOWLES - Never Gonna Be The SameDC Blues - MississippiRory Gallagher - A Million Miles AwayEtta James with Harvey Fuqua...2023-12-081h 47The CircuitPython ShowMax LupoMax Lupo joins the show and shares how he uses electronics in his art pieces and installations.
00:00 Welcome Max
00:45 Max’s start with computers and electronics
01:53 Which programming language is best for each art piece?
03:47 Beep-Boopatronics
7:36 Continuous Memory
10:01 The Margin Maker
14:20 Which board?
Max’s homepage.
Max’s GitHub repositories.2023-12-0416 minThe CircuitPython ShowTod Kurt Part 2Tod Kurt joins the show. Tod shares his synthio boards and discusses his recent trip to Hackaday’s Supercon.
00:00 Welcome Tod
1:00 synthio CircuitPython Day Panel Discussion
1:10 What is synthio in CircuitPython?
2:00 Tod’s custom synthio micrococontroller boards (todbot/circuitpython-synthio-tricks: tips, tricks, and examples of using CircuitPython synthio
2:10 Tod’s Tindie store
4:30 Tod’s visit to Hackaday’s Supercon
5:22 Lux Lavalier on The Bootloader and in-person
6:30 CircuitPython at Supercon
7:02 Lightning Talks YouTube
8:40 Sprite_tm Jeroen Domburg: Building a Portable Vectrex, The Right...2023-11-2023 minThe CircuitPython ShowErin St. BlaineErin St. Blaine joins the show and shares where she finds inspiration, advice for starting Neopixel projects, diffusion tips and tricks, and more.
00:33 Erin’s start with computers and electronics
03:18 Where Erin finds inspiration
04:42 Advice those starting with Neopixel or LED projects
05:43 What were the challenges with LEDs underwater?
08:41 Diffusion tips and tricks
09:52 Favorite Learn Guides
12:17 Which microcontroller?2023-06-1913 minThe CircuitPython ShowMartin TanMartin Tan joins the show. He and Paul discuss Martin’s new book, micro:bit Projects with Python and Single Board Computers: Building STEAM Projects with Code Club and Kids’ Maker Groups.
Martin’s book at Apress: micro:bit Projects with Python and Single Board Computers
Martin’s book at Barnes & Noble
00:40 Martin’s start with computers and electronics
02:25 micro:bit Projects with Python and Single Board Computers: Building STEAM Projects with Code Club and Kids’ Maker Groups
04:06 What is a Code Club?
05:07 Whom is the book intended for...2023-06-0515 minThe CircuitPython ShowDan HalbertDan Halbert joins the show and shares how he started with computers, discovering CircuitPython, where CircuitPython might be going next, and more
Show Notes
00:31 Dan’s start with computers and electronics
02:54 Making computers easier to use
05:09 Discovering CircuitPython
8:40 Advice for new contributors to CircuitPython’s core
9:40 How CircuitPython is ported to new hardware
11:35 Managing CircuitPython releases
13:49 Where CircuitPython might be going in the near future
16:33 Which board?2023-05-2217 minThe CircuitPython ShowBen ShockleyBen Shockley, creator of Mini Fig Boards joins the show. He and Paul chat about the Mini Fig boards and how they came to be, how CircuitPython has helped in development, advice for new PCB designers, and more.
Show Notes
00:22 Ben’s start with computers and electronics
1:27 The MiniFigure boards - what are they and how did they start?
6:40 Comparing the two MiniFig boards
8:53 How has CircuitPython helped with designing the boards ?
9:51 Advice for people starting out in PCB design
11:50 Which board?2023-05-0813 min
Passive House PodcastSpecial Passive House Component Episode: David Boyer, Pat Downey, and Paul Grahovac, PROSOCOIn this special Passive House Component Podcast Episode, Passive House Podcast cohost Zack Semke interviews David Boyer, Pat Downey, and Paul Grahovac of PROSOCO, a leading producer of air and water barriers for Passive House projects via its R-Guard line of fluid-applied membranes.Their discussion spans the eight plus decades of Prosoco’s history, problematic window installations and the importance of robust water barrier in rough openings, and the importance of air tightness in promoting health and resiliency.Prosoco: https://prosoco.com/Previous Podcast Episode: https://passivehouseaccelerator.com/podcast/special-passive-house-component-episode-paul-grahovac-an...Co...2023-04-2747 min
The CircuitPython ShowSeth KerrSeth Kerr joins The CircuitPython Show and shares what an FPGA is; his creation, the IcyBlue Feather FPGA; and how it might be used with CircuitPython. Visit CircuitPythonShow.com for show notes, transcripts, and more. 00:33 Seth’s start with computers and electronics 01:24 What is an FPGA? 02:27 What are the advantages to using an FPGA? 03:16 Seth’s process to designing boards 05:25 The IcyBlue FPGA Feather 09:42 How could you use the IcyBlue Feather with a CircuitPython microcontroller? 11:55 Programming an FPGA 14:05 Which board?2023-04-2415 min
The CircuitPython ShowDanny StapleDanny Staple joins the show and discusses his latest book, Robotics at Home with Raspberry Pi PIco.For show notes and transcripts, visit The CircuitPython Show website.Show Notes:00:00 Intro00:58 Danny’s start with computers and robotics01:51 What the reader can expect from Danny’s book, Robotics with Raspberry Pi Pico03:04 The robotics shopping list04:30 Challenges with the parts shortage06:20 What made CircuitPython a good choice for building the robot?07:40 What were some of the challenges faced when writing the book?2023-04-1021 min
The CircuitPython ShowAlec DelaneyAlec Delaney joins Paul and they discuss how CircuitPython uses continuous integration for development and Alec's CircuitPythonukiah project.This episode is brought to you by PCBWay. Make your dreams a reality with 10 boards starting at only $5! Thank you to PCBWay for their support of The CircuitPython Show. Learn more at PCBWay.com.2:28 What is continuous integration (CI)?4:36 How does CI make it easy for developers and contributors?8:53 What are the challenges in moving to pyproject.toml?11:11 What are the benefits of pyproject.toml?14:56 The CircuitPythonukiah17:14 Whic...2022-12-1219 min
The BootloaderSupersized for SuperconTod shares some of his favorite talks from the recent Supercon conference in Pasadena, CA. Paul and Tod each share one thing they found interesting. Follow Tod on Mastodon: @todbot@mastodon.social Follow Paul on Mastodon: @prcutler@fosstodon.orgShow Notes0:00 Welcome to the Supersize Supercon episode3:17 The Supercon badge8:02 DIY Vacuum Tubes by Nick Pool10:31 Personal Electric Vehicles by Bradley Gawthrop13:00 Samy Kamkar’s Random Walk Exploration15:45 How to Hang and Sell Your Blinky Goodness as Art byChris Combs18:15...2022-12-0525 min
The CircuitPython ShowMark KomusMark Komus joins the show and shares how he started with computers, the Monster Eyes project, contributing to CircuitPython's core, and more.This episode is brought to you by PCBWay. Make your dreams a reality with 10 boards starting at only $5! Thank you to PCBWay for their support of The CircuitPython Show. Learn more at PCBWay.com.1:00 Welcome and Mark’s start with computers2:30 Discovering CircuitPython5:28 The Monster Eyes8:37 Working on CircuitPython’s core11:57 Opportunities from CircuitPython12:50 Which microcontroller?Support the show! If you like wh...2022-11-2814 min
The BootloaderPandas and BreadboardsTod and Paul share a few interesting things including virtual breadboards, Hey Github, and creating virtual synthesizers.00:00 Welcome00:26 MicroPython by Arduino Labs6:15 Home Assistant9:50 WithDiode.com and virtual breadboards14:09 Hey, Github17:40 Virtual Synthesizers - Turn Max patches into VST22:48 MastodonFor detailed show notes, transcripts, and to support the show, visit TheBootloader.net.2022-11-2128 min
The CircuitPython ShowJoey CastilloJoey Castillo joins the show. He and Paul discuss the LCD Featherwing, the Open Book and its user interface, and power management.This episode is brought to you by PCBWay. Make your dreams a reality with 10 boards starting at only $5! Thank you to PCBWay for their support of The CircuitPython Show. Learn more at PCBWay.com.Show Notes:1:12 Welcome and how Joey got started with computers & electronics2:48 LCD Featherwing and implementing CircuitPython first5:55 The OpenBook and the user interface11:10 Managing power consumption18:08 Which microcontroller?F...2022-11-1420 min
The BootloaderWhat's the Matter?In episode 4, Tod and Paul discuss macOS Ventura, the Matter smart home specification, video synths and more.Show Notes:00:22 macOS Ventura cannot copy UF2 files2:37 Matter smart home specification7:00 3D printing for good causes10:00 Video Synthesizers13:10 IO Rodeo’s Open Colorimeter15:40 ffmpeg.guideThank you for listening! For show notes, transcripts, and to support the show, visit thebootloader.net.2022-11-0721 min
The CircuitPython ShowJason Pecor (and the Trolls)Paul takes the podcast on the road and visits Jason Pecor in Altoona, Wisconsin. Jason shows Paul CircuitPython powered Trolls and shares how they came to be.This episode is brought to you by PCBWay. Make your dreams a reality with 10 boards starting at only $5! Thank you to PCBWay for their support of The CircuitPython Show. Learn more at PCBWay.com.4:05 How Jason discovered CircuitPython5:40 Meet the trolls7:50 The park in the summertime8:55 Proof of concept using CircuitPython11:05 CircuitPython hardware in the trolls12:45 Audio demo...2022-10-3119 min
The BootloaderThe Middle is a PumpkinIn episode 3, Paul and Tod share news about boards, code editors, sensors, and something fun at the end.0:15 RISC-V Arduino Chip04:28 Code editors and JetBrains Fleet09:35 Person Sensor by Useful Sensors13:38 GitHubCopilotInvestigation.com19:18 CircuitPython’s ulab23:57 MakerDeckIf you like what you hear, one of the best things you can do to help the show is tell a friend or write a review.Consider supporting the show financially - your support helps with the cost of hosting, recording and transcripts. Thank you for your...2022-10-2427 min
The CircuitPython ShowJim MussaredJim Mussared, a maintainer of MicroPython, joins the show. He and Paul discuss how MicroPython started, collaborating with CircuitPython, being a maintainer, favorite uses of MicroPython, and more.This episode is brought to you by PCBWay. Make your designs a reality with ten boards starting at only $5!1:02 Welcome and Jim’s start with electronics3:02 Damien George starting MicroPython3:50 MicroPython and CircuitPython5:32 Collaborating with CircuitPython6:10 MicroPython’s Strengths6:45 What is it like to be a maintainer of an open source project?8:50 Balancing open source and p...2022-10-1718 min
paul sams modern soul sessionspaul sams modern soul sessions podcast 8podcast 8 is here for the faithful sorry im not live broadcasting yet few tech issues being resolved but we are really close now untill then the podcast is here at the usual time to keep your toes tapping till samsy rides the airwaves once again yay feel free to download or share with friends once again many thanks for your contiuing support x
1/rhythm factory African rhythm a touch of jazz remix
2/cool million feat glenn jones tonight extended
3/pete le freq ray parker jnr party now refreq
4/anelisa lamola ,Gregg gould ,phebe Edwards earth...2022-10-153h 00
The BootloaderM is for Makers, Music, and Machine LearningIn episode 2, Paul and Tod talk about some makers and their cool projects, including the Lux Lavalier and Pikon; creating music in a web browser, and more.PixelBlaze expression language (Tod #1) 1:45 Lux Lavalier Created by the team of Jason Coon, Debra Ansell, Ben HenckeWhisper OpenAI (Paul #1) 5:50 Blog post, paper and Google Colab example linked from their GitHub repository From OpenAI, who developed Dall-E Machine learning to transcribe and / or translate audio filesMusic generation in the browser (Tod #2) 11:03 Tone.js in-browser synthesis (https://tonejs.github...2022-10-1028 min
The CircuitPython ShowBradán LaneBradán Lane shares how CircuitPython has helped in creating the JoyPad and LumosRing.This episode is brought to you by PCBWay. Make your designs a reality at only $5 for ten boards at PCBWay.01:10 Bradan’s start with electronics02:33 Bradan’s first CircuitPython product: the Joypad06:25 Customizing the JoyPad09:07 The LumosRing and LumosStick15:20 Which microcontroller?Visit CircuitPythonShow.com for show notes and transcripts.2022-10-0317 min
The BootloaderRock Stars Are Just Like UsIn this first episode, Paul and Tod each share a few things they found interesting. They discuss open source projects including tio and Belay, 3D printing, and a rock star's Python project.Follow the show on Twitter or visit The Bootloader for full show notes and transcripts. 00:23: Fullcontrol.xyz 02:11: tio 04:14: Belay 06:36: Rivers Cuomo 08:57: CircuitPython Camera Support 11:36: Bambu Labs X1 Carbon 3D printer reviewThe Hosts Follow Tod on Twitter Follow Paul on TwitterSponsor The Bootloader Your financial sponsorship helps with the cost of hosting, recording a...2022-09-2613 min
The CircuitPython ShowThea FlowersThea Flowers joins the show and shares about her synthesizer company, Winterbloom, and the role CircuitPython has played.Show Notes:00:30 How Thea first got started with computers00:50 Discovering CircuitPython2:25 Thea’s synthesizer company, Winterbloom3:40 Winterbloom products that use CircuitPython(Sol and Big Honking Button:)7:00 Castor and Pollux8:50 Which microcontroller?2022-09-1911 min
The BootloaderTrailer #2Paul and Tod preview The Bootloader and share a fun fact. The Bootloader is coming September 26th.Follow us on Twitter @thebootloaderVisit our homepage at thebootloader.net2022-09-1900 min
The BootloaderThe Bootloader TrailerWelcome to The Bootloader with Tod Kurt and Paul Cutler. Each episode we'll bring you news, project updates, and more from the maker and tech scenes.2022-09-0900 min
The CircuitPython ShowRadomir DopieralskiRadomir Dopieralski, aka deshipu, joins the show. He shares his interest in computers growing up behind the Iron Curtain, developing games with CircuitPython, robots, and more.Show Notes:00:15 Welcome and getting started with computers behind the Iron Curtain1:45 Discovering MicroPython via its Kickstarter2:50 Handheld games - the Pew Pew family4:30 Learning Pew Pew in workshops6:22 How does CircuitPython make it easy to program games?7:42 What are the challenges in using CircuitPython to program games?10:30 Robot building13:30 Fluff bug14:30 Which m...2022-09-0516 min
The CircuitPython ShowBrent RubellBrent Rubell joins the show. He and Paul discuss the Internet of Things, Adfafruit's Wippersnapper firmware, their favorite newsletters, and more. Visit https://circuitpythonshow.com/episodes/16 for newsletter links.Show Notes:00:30 How Brent got started with computers and electronics1:45 How does Brent define the Internet of Things?2:45 What is Adafruit IO?6:04 Wippersnapper6:35 What is “no code”? 9:55 How do you add components to Wippersnapper?12:30 Where is Wippersnapper going next?14:00 Project advice15:18 Favorite newsletters18:37 Which microcontroller?2022-08-2219 min
The CircuitPython ShowJoshua LoweThis episode welcomes Joshua Lowe, the inventor of Edublocks, which helps bridge the gap from Scratch Python 3(including CircuitPython).Show Notes:00:20 Welcome and introduction to Edublocks4:18 Making Edublocks open source5:20 Working with Edublocks and hardware9:20 Where is Edublocks going next?10:40 The pandemic and remote education13:42 Which microcontroller?2022-08-0815 min
The CircuitPython ShowKevin MatochaKevin Matocha joins the show and shares some of his projects, including the Hackpad and TinyLogicFriend.Show Notes:00:20 Welcome00:27 How Kevin started with computers and electronics3:50 HackPad8:20 Wiring the HackPad9:55 TinyLogicFriend - a logic analyzer using Sigrok15:28 Which microcontroller?2022-07-2516 min
The CircuitPython ShowNicholas TollerveyNicholas Tollervey joins the show and shares his music background, the Mu code editor, and how learning to code can be similar to learning to play an instrument.Show notes: 0:18 Welcome and Nicholas’ beginning with computing 2:35 The Mu code editor6:40 Nicholas’ music background8:20 How is learning music and coding similar?11:35 Code Grades15:50 Nicholas and teaching17:20 Turn the tables19:05 Which microcontroller?2022-07-1120 min
The CircuitPython ShowGuy DupontGuy Dupont joins the show and shares some of his projects, including his Subaru backup camera project, T9 predictive text MacroPad, and more.00:12 Welcome and Subaru backup camera project4:40 Link to YouTube Video: [YouTube](https://www.youtube.com/watch?v=Wy4Ua8bXRiE)4:50 Guy’s predictive text MacroPad7:40 T9 Predictive Text written in CircuitPython9:55 Favorite coding language10:40 CircuitPython advantages 11:50 Guy’s music connections 13:20 Raspberry Pi iPod project16:20 Turn the tables18:58 Guy’s YouTube channel2022-06-2720 min
paul sams modern soul sessionspaul sams modern soul sessions on cruise fm 18,6,22well my pedigree chums heres todays lively show for you to listen again or catch up with if you was busy doing other things please enjoy and share share share lol more next week
1/joe ventura salsa house revisted joe Gomez latin kiss remix
2/Aretha franklin a deeper love ky dickys long intro
3/sunburst band face the love
4/jon cutler ft kendi you groove me
5/soul avengerz ft krystan cummings respect trois garcon remix
6/dave lee ft tiffany tizelle if you ever need somebody
7/jamiroquai 7 days in sunny june Ashley beadle heavy disco...2022-06-183h 00
The CircuitPython ShowAnne BarelaAnne Barela discusses her time at Adafruit, writing the Python on Hardware newsletter, retro tech, and more.00:17 Welcome and Anne’s start with Adafruit01:15 Anne’s first two books on microcontrollers03:38 CircuitPython through the years5:40 What goes into writing an Adafruit Learn Guide?7:30 ThePython on Microcontrollers newsletter10:30 When did Anne first get into computers and electronics?14:05 Turn the tables16:05 Which microcontroller?2022-06-1317 min
The CircuitPython ShowPierre ConstantineauIn episode ten, Pierre and Paul have an in-depth conversation about mechanical keyboards and how CircuitPython has helped Pierre with development.00:15 Welcome and starting with computers and electronics2:00 Building custom keyboards4:10 BlueMicro keyboards (get screenshot)6:40 Developing the BlueMicro keyboard firmware7:40 What goes into building a custom keyboard?11:20 Microcontroller keyboard matrices13:55 Changing from Arduino to CircuitPython for keyboard development17:35 How has CircuitPython helped with troubleshooting?20:15 Turn the tables21:30 Which microcontroller?2022-05-3022 min
Passive House PodcastPaul Grahovac + Pat Downey – PROSOCO (Special PH Component Episode)In this special Passive House Component Episode, Passive House Podcast cohost Zack Semke interviews Paul Grahovac and Pat Downey of PROSOCO, provider of the R-Guard system of fluid-applied air and water barriers since the early days of the North American Passive House movement. Paul and Pat share how the R-Guard system was originally an outgrowth of building rescue work, how PROSOCO worked with the International Living Future Institute to remove phthalates from their product chemistry in order to be included on the Bullitt Center project, and how a recent code-built high school in Washington State became an "A...2022-05-2640 min
The CircuitPython ShowLiz ClarkLiz Clark joins the show and shares her maker journey, music background, and we talk MIDI for beginners.00:25 Welcome and Liz’s music background4:30 BlitzCityDIY https://www.youtube.com/blitzcitydiy6:30 Getting started with MIDI10:38 Adafruit MIDI Learn guide, MIDI for Makers: https://learn.adafruit.com/midi-for-makers12:26 Liz’s music setup at home15:20 Turn the tables16:20 Which microcontroller? 2022-05-1617 min
The CircuitPython ShowMelissa LeBlanc-WilliamsMelissa and Paul talk Blink, retro tech, and more.00:38 Blinka03:00 What it means to be the maintainer of Blinka04:37 How Melissa started with CircuitPython 07:12 Melissa’s YouTube channel07:57 OpenSign Library8:05 Melissa’s CNC machine 09:28 Melissa’s current retro tech projects10:30 Retro Macs12:30 A mysterious box appears14:35 Turn the tables15:22 Which microcontroller?2022-05-0216 min
The CircuitPython ShowAlie GonzalezAlie Gonzalez joins the show and shares her maker journey, how she started her professional career, and the tech scene in Miami.00:50 Welcome and Alie’s journey to becoming a maker2:22 The start of Alie’s career4:30 Sparkfun & Alie6:40 Miami Hack Week14:45 The tech scene in Miami18:20 Which microcontroller?2022-04-1819 min
The CircuitPython ShowSeason 2 TrailerA preview of the upcoming season two and its guests.2022-04-1100 min
The CircuitPython ShowScott Shawcroft 00:20 How Scott joined Adafruit3:00 What are some of the biggest changes and accomplishments over the last five years since CircuitPython was first released?7:20 Working with upstream MicroPython9:20 Porting CircuitPython to Raspberry Pi (bare metal)13:28 ESP32-S3 development 16:30 Scott’s work in community broadband 22:40 Turn the tables24:30 Which microcontroller?2022-04-0526 min
The CircuitPython ShowRose HooperEpisode 5 - Rose HooperSupport the show: https://circuitpythonshow.com/support00:35 Getting started with computers04:36 Early 90s BBS culture & Freeness07:46 Discovering Python10:00 Home Assistant15:20 CircuitPython23:15 Which microcontroller?2022-03-2920 min
The CircuitPython ShowTod Kurt1:00 Tod Kurt introdction Homepage: https://todbot.com2:05 BlinkM2:35 Tod's experiences with Arduino7:20 Tod's work with synthesizers12:18 Sound on CircuitPython15:45 Tod and Python / CPython21:20 Tod's CircuitPython Tips Github repository23:20 Turn the tables (Ask Paul a question)29:45 Which microcontroller would you grab for a prototype or new project?2022-03-2235 min
The CircuitPython ShowJohn GallaugherProfessor John Gallaugher of Boston College joins the show and talks CircuitPython in higher education.01:01 Adding CircuitPython to a higher ed curriculum05:38 Examples of CircuitPython used in accessibility7:30 How do you teach students with hardware? https://www.youtube.com/watch?v=_oldZ-6eVhg16:30 Maker communities19:27 Professor Gallagher’s YouTube channel: https://www.youtube.com/c/profgallaugher/videos?view=0&sort=dd&flow=grid23:20 Former students’ success28:20 Turn the Tables segment: Professor Gallaugher asks Paul his favorite bands29:40 Go to microcontroller for a new...2022-03-1532 min
The CircuitPython ShowLes PounderLes Pounder of Tom's Hardware stops by and talks all things microcontrollers, shares his latest project, and retro tech.1:30 Biggest microcontroller surprise4:25 Favorite Pico add-on board5:35 Photo of all the boards7:25 Microcontroller pick12:30 Les’ latest CircuitPython project14:05 Retro tech18:44 Turn the tables: Retro tech to take to a deserted island? (Where Paul gets the other Sega Genesis name wrong)20:57 How Les was introduced to CircuitPython2022-03-0824 min
The CircuitPython ShowKattni Rembor00:40 Kattni’s journey, originally told at PyOhio 2019: https://www.youtube.com/watch?v=-bBHXimlfPQ and first project: https://learn.adafruit.com/circuit-playground-express-piano-in-the-key-of-lime)6:00 Adafruit Discord: http://adafru.it/discord7:45 Mentoring9:55 Community discussion12:50 CircuitPython 2022 goals16:00 CircuitPython tagline: Code + Community = CircuitPython17:50 Learn Guides22:40 Turn the Tables23:40 Which microcontroller to start your next project?2022-03-0125 min
The CircuitPython ShowThe CircuitPython Show TrailerThe CircuitPython Show is an independent podcast hosted by Paul Cutler. Each episode he will have a conversation with someone doing something cool and awesome in or around CircuitPython.2022-01-2500 min
paul sams modern soul sessionspaul sams modern soul sessions on cruise fm 8,1,22here this weeks show hot off the presses for those that missed it a little different hope you enjoy it all the same more next week as always x
1/undisputed truth you + me = love original 12
2/what can I say boz scaggs pete le freq remix
3/shuya okino feat navasha daya still in love
4/jhn cutler feat e-man its yours original distant music mix
5/ceronne hooked on you original mix
6/cerrone misunderstanding luca cassini remix
7/sister sledge if you really want me
8/gok wan right direction
9/thelma Houston don’t leave me th...2022-01-083h 01
CRYPTO 101Ep. 408 - The Next Internet with Matt Cutler of BlocknativeIn this episode of CRYPTO 101, brought to you by LinkedIn Jobs, we dissect Web 3 with Matt Cutler of the Blocknative Corporation, along with highlighting the parallels between cryptocurrency and the early days of the internet.
Sponsored link:
www.linkedin.com/crypto
Guest Links:
https://twitter.com/mcutler?lang=en
https://twitter.com/Blocknative
https://www.blocknative.com/
Show Links:
https://CRYPTO101podcast.com
Patreon:
www.patreon.com/user?u=8429526
Twitter:
https://twitter.com/Crypto101Pod
https://twitter.com/BrycePaul101
https://twitter.com/PizzaMind
https://instagram.com/crypto_101
Facebook:
https://www.facebook.com/groups/101Crypto
https://www.facebook.com/CRYPTO101Podcast
...2022-01-0647 min
Care Giver Life with Dignity PodcastUnderstanding Grief with Rev. Paul CutlerUnderstanding Grief with Rev. Paul Cutler Holidays are a tough time when you've lost a loved one. How can you navigate Christmas and New Years when the loss is ever present? Guest Rev. Paul Cutler shares his thoughts and advice for those suffering with grief. Find our website Life With Dignity This is a production of Habanero Media 2021-12-1433 min
The Time Traveler’s Radio Show!Episode 6: The Time Labyrinth! - Part 2After being attacked by terrifying time anomalies and rescued by a guy named Kevin from Canada, our heroes are faced with a new reality... they've been tricked by their sworn arch nemesis, Victor, and are in desperate need of help. They now realize that anything they do to progress in the maze could result in catastrophic changes to time and evil anomalies bent on their utter destruction. In their darkest hour, when all seems lost and Victor is about to win, the team finds unexpected help in an outdated item, and a glimmer of hope in the mysterious Amelia...2021-08-311h 14
Black Belt InterviewsInterview with Grand Master Paul Cutler IX - Part 2Grand Master Paul Cutler is the first ever student in the United Kingdom to be promoted to 9th Dan Grand Master. Grand Master Cutler has been studying Taekwon-Do for over 40 years and his mentor and career long instructor is the legendary First Grand Master Rhee Ki Ha (FGMR), known as the Father of British and European Taekwon-Do.Grand Master Cutler teaches authentic ITF Taekwon-Do as formulated by Taekwon-Do's founder, the late General Choi Hong Hi. The complete Martial Art, its beliefs customs, culture, method and ideology, all of which all have equal importance as the physical movements; for...2021-07-1258 min
Black Belt InterviewsInterview with Grand Master Paul Cutler - Part 1Grand Master Paul Cutler is the first ever student in the United Kingdom to be promoted to 9th Dan Grand Master. Grand Master Cutler has been studying Taekwon-Do for over 40 years and his mentor and career long instructor is the legendary First Grand Master Rhee Ki Ha (FGMR), known as the Father of British and European Taekwon-Do.Grand Master Cutler teaches authentic ITF Taekwon-Do as formulated by Taekwon-Do's founder, the late General Choi Hong Hi. The complete Martial Art, its beliefs customs, culture, method and ideology, all of which all have equal importance as the physical movements; for...2021-07-091h 01
paul sams modern soul sessionspaul sams modern soul sessions on cruise fm 12,6,21fast as you like heres this weeks podcast for you to enjoy in the sun and annoy your neighbours go on do it make me smile lol more next week until then keep safe
1/david penn feat sheylah cuff y scream micky more and andy tee
2/howard Johnson keeping love new sm re edit
3/atlantic starr you sm re edit
4/the whispers turn me out
5/Gregg perry it takes heart
6/dean parrish im on my way
7/spiral staircase more today than yesterday
8/paullette reeves jazz freak
9/alphie davison love is...2021-06-123h 02
ctrl-alt-del/churchPaul BeautymanPaul Beautyman is the founder of Youth Work Journeys. With years of experience in churches, projects and teaching, Paul talks to Stewart about supporting people, about the changes in church and his hopes for Youth Work Journeys.
---
Send in a voice message: https://podcasters.spotify.com/pod/show/ctrl-alt-del-church/message2021-02-041h 02
Darke AudioSteph Cutler Making Lemonade founder facilitating diversity and inclusion. Outside Centre Radio ShowSteph Cutler Making Lemonade founder facilitating diversity and inclusion in the work place
Outside Centre Radio Show with Dr Paul Darke broadcast on Wolverhampton City Radio (WCR FM) 2007-2010
https://www.digital-disability.com/2020-10-2543 min