Shows
Daily FireWinston Churchill shares some DAILY FIRELet our advance worrying become advance thinking and planning - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2025-10-1901 minDaily FireWinston Churchill shares some DAILY FIRESuccess is walking from failure to failure with no loss of enthusiasm. ~Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2025-08-1901 min
Since Attlee & ChurchillThe Attlee vs Churchill Elections (Episode 2 of 3): The 1950 General ElectionThe 1950 general election, the second contest between Clement Attlee and Winston Churchill, came four and a half years after Labour's landslide victory at the end of the Second World War. In many ways, this election was a referendum on the agenda implemented by Attlee as prime minister, from the NHS to the nationalisation of 20% of the economy. For Winston Churchill, 1950 was an opportunity to try and reclaim power after his shock rejection in 1945. Throughout, there was drama and the laying of the foundations for post-war British politics. In this podcast, Lee and Richard chart the election battle from the...
2025-07-201h 04Daily FireWinston Churchill shares some Daily FireLet our advance worrying become advance thinking and planning. - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2025-06-0801 min
The Write Focus6:19 / Writers on Writing / Lois WinstonLois Winston is a strong writer, best known for her Anastasia Pollock Crafting series of cozy mysteries.
Early in her career, with Manuscript #2, she acquired an agent, but the roses of her writing journey still had thorns, a lesson to us writers that we control our success. Winston definitely controlled her success. She survived a bankrupt publishing house and the closure of a publisher’s entire cozy mystery line, but it was shenanigans with the contract that brought her into self-publishing.
She talks about it all, along with writing tools that can be a distraction, in...
2025-05-1438 min
The Game of GymnasticsWhat Makes a Great Coach? - Lee Woolls, National Coach for British GymnasticsGet 10% off Rip Prevention and Protection with my code "Powell" - https://wodndone.com/?apply_coupon=powell Join us in this exciting episode of the Game of Gymnastics podcast as we sit down with Lee Woolls, the newly appointed national coach for men's artistic gymnastics at British Gymnastics. With 29 years of coaching experience and 17 years as the head coach of Birmingham Gymnastics Club, Lee shares his insights on what makes a great coach and gymnast, the emotional journey of gymnastics, and the importance of collaboration within the sport. In this episode, we discuss: Lee's j...
2025-05-0645 min
MK and RL Talk NFLWilson and Winston to Giants, Draft Thoughts, 'Quarterback' Returns to Netflix, March MadnessIn this episode: How will Russell Wilson and Jameis Winston impact the Giants, and who should the Giants draft? Will Shedeur Sanders be a star or a bust? Also, 'Quarterback' to feature Burrow, Goff and Cousins, and a look at March Madness.
2025-04-0104 minDaily FireWinston Churchill shares some DAILY FIRESuccess is not final, failure is not fatal: it is the courage to continue that counts - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2025-03-0301 min
The Truth In This Art: Stories That MatterEmpowered Montage: Highlights of Women Leading Change and CreativityDive into an empowering montage compilation celebrating the brilliance of four phenomenal women making waves in their respective fields! Join us as we revisit captivating moments from our podcast episodes featuring:Jamea Richmond-Edwards: Prepare to be inspired by Jamea Richmond-Edwards' artistry and insight as she discusses her journey as an acclaimed visual artist. Listen to the full episode here.Naomi Winston: Delve into thought-provoking discussions on activism and social justice with Naomi Winston, whose passion for creating positive change shines through in every word. Listen to the full episode here.Abisola Yelé Oladeinde: Brace yourself for an insightful e...
2024-12-1226 minDaily FireWinston Churchill shares some DAILY FIRESuccess is walking from failure to failure with no loss of enthusiasm. ~Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-12-0801 minDaily FireWinston Churchill shares some DAILY FIRESuccess is walking from failure to failure with no loss of enthusiasm. ~Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-11-1501 min
PHTRI PodcastWinston Morgan, Professor of Toxicology, Equity and Inclusive Practice at UELAn interview with Professor Winston Morgan, Professor of Toxicology, Equity and Inclusive Practice at the University of East London.Confronting Racism: Health Inequities, Sickle Cell Challenges, and Academic GatekeepingIn this compelling episode of the Public Health Tackling Racism and Inequality Program podcast, host Lee Pinkerton engages with Professor Winston Morgan from the University of East London. They delve into the impacts of racism on public health and academic careers, discussing the ADPH London position statement and exploring strategies to combat systemic barriers.The conversation touches on the psychological and physiological effects of...
2024-10-1432 minPHTRI PodcastWinston Morgan, Professor of Toxicology, Equity and Inclusive Practice at UELAn interview with Professor Winston Morgan, Professor of Toxicology, Equity and Inclusive Practice at the University of East London.Confronting Racism: Health Inequities, Sickle Cell Challenges, and Academic GatekeepingIn this compelling episode of the Public Health Tackling Racism and Inequality Program podcast, host Lee Pinkerton engages with Professor Winston Morgan from the University of East London. They delve into the impacts of racism on public health and academic careers, discussing the ADPH London position statement and exploring strategies to combat systemic barriers.The conversation touches on the psychological and physiological effects of...
2024-10-1432 min
You Know The Drill with Wes Smith & Brady KennedyYKTD EP #14 Seth Kiriluk, Brady Kennedy, and Winston LeeThey say Oxford is one of the most beautiful campuses in the world of college football, but it was recently overrun by CATS! Seth Kiriluk, Brady Kennedy, and Winston Lee join Wes Smith to talk about the 4th highest ranked win in Kentucky Football History.
2024-10-031h 04Daily FireWinston Churchill shares some DAILY FIRESuccess is walking from failure to failure with no loss of enthusiasm. ~Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-10-0201 minDaily FireWinston Churchill shares some Daily FireSuccess is the ability to go from failure to failure without losing your enthusiasm - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-09-2501 min
You Know The Drill with Wes Smith & Brady KennedyYKTD EP #12 Manis Blair & Winston LeeThe BULLDOG BITE wasn't enough to deter HT24 personalities Winston Lee and Manis Blair from believing in Blue. Join Wes as they combine forces to discuss pigskin across the commonwealth.
2024-09-191h 18Daily FireWinston Churchill shares some DAILY FIRESuccess is not final, failure is not fatal: it is the courage to continue that counts - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-09-1401 min
The Business Leadership PodcastBuilding a Low-Carbon Future: A Conversation with Winston Morton In this episode of the Business Leadership Podcast, Winston Morton of Climative discusses how his company addresses sustainability by producing low-carbon plans for residential buildings. Morton elaborates on how Climative's AI-driven platform simplifies the retrofit process for homeowners, pre-assessing buildings to provide cost-saving and carbon-saving solutions. He emphasizes the importance of collaboration with cities, utilities, and governments to push forward personalized and effective energy programs. Morton also explains the transformative potential of AI and large language models in the energy sector, highlighting the challenges and future vision of achieving carbon-positive buildings. The discussion touches on the long-term journey of c...
2024-09-0521 min
You Know The Drill with Wes Smith & Brady KennedyYKTD #7 Winston Lee & Austin KiddOn this episode Wes sets down with Winston Lee and Austin Kidd to discuss the 2024 Olympics in Paris.
2024-08-151h 13
The WLD ShowJason Shafton: Building Growth Consulting Firm Winston Francois to Help Founders with Growth and Marketing | #134Jason Shafton is the founder of Winston Francois, a growth consulting firm. Winston Francois helps helps founders, executives, and investors with growth, product, and marketing. Prior to Winston Francois, Jason was the VP at Vively Health, VP of Marketing at Headspace, and Chief Marketing Officer at Soothe. Jason was also the co-founder of Heal, providing access to primary care doctors through a simple app. In this episode, we talk about Jason's career and gave him the perfect experience to build a growth consulting firm for founders.
2024-07-2559 min
The Winston Marshall ShowLee Fang - The Israel-Palestine DebateInvestigative journalist, Unherd columnist and host of the leefang.com Substack Lee Fang joins me to discuss the ongoing war in Gaza. We take a longer view on the conflict. When did this beging? What does peace look like?I've found it difficult to find pro-Palestine voices to come on and speak with me. So, although Lee and I disagree on Israel-Palestine, I'm grateful that he came on to the show to share a different perspective.Through diversity of opinion we get closer to the truth.Lee Fang is a...
2024-06-181h 27Daily FireWinston Churchill shares some Daily FireLet our advance worrying become advance thinking and planning. - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-06-1301 min
The Truth In This Art: Stories That MatterNaomi Winston: Founder of Creative Representation Empire on the Power of Authentic StorytellingIn this episode of The Truth in This Art, host Rob Lee interviews Naomi Winston, founder and CEO of the Creative Representation Empire. They discuss Naomi's journey in creating coloring books that promote representation for Black and Brown communities, the importance of authenticity in storytelling, and the impact of her work on individuals and communities. 🎨📚Episode Highlights:Naomi introduces herself and shares the mission behind the Creative Representation Empire. [00:01:05] 🌟Naomi discusses her passion for writing and how it connects to her father's dream of becoming a writer. [00:04:05] ✍️The inspiration behind Naomi's first book and her motivation to...
2024-03-1551 minDaily FireWinston Churchill shares some DAILY FIRE Let our advance worrying become advance thinking and planning - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2024-03-0501 min
Behind the HeadlinesNorth Carolina nurse accused of killing patients with lethal doses of insulinWelcome to another episode of Behind the Headlines, where we feature experts and journalists discussing a variety of topics.
In this latest episode, Virginia Annable, a reporter for Lee Enterprises Public Service Journalism team based in Hickory, North Carolina, discusses her story about Johnathan Howard Hayes, a nurse in Winston-Salem, North Carolina.
Hayes stands accused of murder and attempted murder of patients in a hospital where he worked. Hayes is accused of intentionally administering a near-lethal dose of insulin to a patient in the same year he was nominated to be a nurse of distinction.
2023-11-1519 minDaily FireWinston Churchill shares some DAILY FIRE Success is walking from failure to failure with no loss of enthusiasm. ~Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2023-10-1701 minDaily FireWinston Churchill shares some Daily Fire Success is the ability to go from failure to failure without losing your enthusiasm - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2023-10-1101 minDaily FireWinston Churchill shares some DAILY FIRE Success is not final, failure is not fatal: it is the courage to continue that counts - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2023-09-2801 min
The WLD ShowFitness Roundtable: Winston Ma and Chris Chou weigh in on exercise, diet, and common misconceptions |#109We've invited our friends Winston Ma and Chris Chou to do a fitness round table with us. Lee moderates the conversation while Winston, Chris, Andrew, and Will talk about their fitness journey, workouts, diet, and common misconceptions.
2023-09-191h 38Daily FireWinston Churchill shares some Daily Fire Let our advance worrying become advance thinking and planning. - Winston Churchill Check out John Lee Dumas' award winning Podcast Entrepreneurs on Fire on your favorite podcast directory. For world class free courses and resources to help you on your Entrepreneurial journey visit EOFire.com
2023-06-2601 min
The Digital Fabrication Experiment PodcastEp.073 - ReunionIt has been ages since the last show but the crew returns for our first 2023 episode. Winston, Chris and Ed catch up on what each is doing these days, the future of US manufacturing and shop goals for the year.
Available now on Apple Podcasts (link in bio), Spotify and Google Podcasts.
Or stream directly from
https://dfxpodcast.efk3.com
.
#dfxpodcast #thedigitalfabricationexperiment #maker #instamachinist #makersgonnamake
Links
Within Tolerance Podcast (@withintolerancepodcast on IG) - https://www.instagram.com/withintolerancepodcast
Ha...
2023-04-251h 04
3 Minute History187 Winston Churchill (1874 - 1965)Winston Churchill was one of the most influential figures of the 20th century. Born on November 30, 1874, in Blenheim Palace, Oxfordshire, England, Churchill was the son of Lord Randolph Churchill, a prominent politician, and Jennie Jerome, an American socialite.
2023-04-1303 min
Cookin Careers11 - Debora SanchezMrs. Sanchez is a partner at Sanchez & Sanchez, a criminal defense law firm. She has been practicing law for over 25 years, teaches as an adjunct professor at SMU, and is a proud mother of three boys.
Hosts: Ross Cunningham, Silas Hosler, Winston Lee
2023-03-201h 05
Be Powerful with Liz & Lee81. What It's Like to Become an Owner of Hilliard Studio Method | Introducing Lucy Noell Skelly of HSM Winston-Salem!Last year, we announced that Hilliard Studio Method is expanding to brand new cities through a Privileged License opportunity. Now, we are SO excited to introduce you to our newest HSM family member, Lucy Noell Skelly! Lucy's transformation is so inspiring and a true testament to the HSM workouts and community. She went from being the "least athletic person" (her words, not ours!) to opening up her own location of HSM in Winston-Salem this Spring. This episode is all about her journey and the behind-the-scenes of opening your own HSM location. Leave us a voice memo at...
2023-02-0234 minCookin Careers10 - Jennifer SampsonMrs. Sampson is the McDermott-Templeton CEO and President of United Way of Metropolitan Dallas. She received a BBA from Baylor and has been with United Way for over 20 years, and leads the largest non-governmental funder for programs focusing on education, income, and health.
Hosts: Adam Alfalahi, Patrick Flanagan, Winston Lee
2022-09-0154 minCookin Careers9 - Dr. Gabriela ReedDr. Reed is a clinical psychologist by training and the director of counseling at St. Mark's School of Texas. She received a Bachelor's of Science at Texas A&M, earned a PhD from UT Southwestern, and has led the St. Mark's community since 2014.
Hosts: Jack Jackson, Winston Lee
2022-08-2520 min
LEE JACKSON Watches -Luxury/Vintage. Collecting Watches Podcast with America's Finest Watchman#238 Lee Jackson Watches. Luxury and Vintage Watches. Buying, Collecting and Enjoying Watches with America's Finest WatchmanShine a light into the uncharted wilderness that is watch buying and collecting.
Today we look At Harry Winston pt.2 and Gubelin.
These are sleeper watch companies that you should know all about.
I'll bet you don't know too much, but we will learn a lot about these sleeper watch companies.
Harry Winston is not for the weak kneed people, it POPS!.
Every one will notice this brand on your wrist.
Gubelin, makes their own branded watches and retails some of the finest brands of all time.
...
2022-07-1629 minLEE JACKSON Watches -Luxury/Vintage. Collecting Watches Podcast with America's Finest Watchman#237 Lee Jackson Watches. Luxury and Vintage Watches. Buying, Collecting and Enjoying Vintage Watches with America's Finest WatchmanHee Hee Ho Ho Here we go. Highest end luxury watches are the ticket to riches today.
Jewelry Company watches by Graff and Harry Winston part 1.
Get ready to bling out with these fine jewelry and watch companies.
It is important to understand and appreciate brands like these because you man need or find one and you need to know what they are and what they go for, just in case.
Also these brands can be found as close outs for heap cheap comparatively speaking.
If you want to impre...
2022-07-1628 min
Cookin Careers8 - Dr. Garheng KongDr. Kong is the founder and managing partner of HealthQuest Capital, a Venture Capital Firm based in Austin, Texas. He has a long list of successes investing in innovative healthcare companies, earned two undergraduate degrees from Stanford, received an MD, PhD, and MBA from Duke University, and is a father of three.
Host: Winston Lee
2022-06-2032 min
Kopitiam ConversationsEpisode 011: Sharon Lee (Founder, Tender Hearts Cafe): Surviving Cancer to Champion Equality for Special NeedsThis is Episode 11.
This is also the first episode of Season 2, with new episodes from 11 June 2022.
Our guest for this episode is Ms Sharon Lee, the Founder of Tender Hearts Cafe, a social enterprise founded in 2016 for special needs youths, championing inclusion, acceptance and equality for special needs.
Sharon shares her personal journey of being a mother to a person with special needs and, with a few other parents, established Tender Hearts as a centre to equip special needs youths with skills such as baking, cooking and living skills. Sharon reflects on the...
2022-06-1128 minCookin Careers7 - Dr. Thomas WangDr. Wang is a professor and the chair of the Department of Internal Medicine at UT Southwestern Medical Center. He is a highly decorated, award-winning researcher, leading hundreds of studies ranging from Cardiovascular Biomarkers to Metabolism, earned his degree at Harvard Medical School, and is a father of three.
Hosts: Adam Alfalahi, Winston Lee
2022-05-0822 minCookin Careers6 - Leon BackesMr. Backes is the founder of Provident Realty Advisors, a real estate firm based in Dallas. He channels his creative spirit to develop real estate projects, attended the University of Missouri, and is a father of one.
Hosts: Adam Alfalahi, Winston Lee
2022-05-0831 minCookin Careers5 - Kent McGaughyMr. McGaughy is a founding shareholder for CPMG, a company managing several university endowments in private equity and public security. He serves as director for several private companies including Reata Pharmaceuticals, attended the University of Texas and Havard Business School, and is a father of two.
Hosts: Adam Alfalahi, Jack Jackson, Winston Lee
2022-04-0455 minCookin Careers4 - Bradford ScottMr. Scott is an electrical engineer for Lockheed Martin, a global security and aerospace company. He works as the program management director, designs fighter jets, attended Northwestern, attained an MBA at Emory, and is a family man and father of two.
Hosts: Adam Alfalahi, Jack Jackson, Winston Lee
2022-03-2125 minCookin Careers3 - Nicole MusselmanMs. Musselman is the founder and CEO of KOCH and the co-founder of 33.9 sneakers. She attended SMU, a Harvard Executive Education program, inspires girls to be joy-makers and risk-takers, and is a businesswoman and mother of one.
Hosts: Adam Alfalahi, Jack Jackson, Winston Lee
2022-03-0634 minCookin Careers2 - Dr. Peter MaloufDr. Malouf is an award winning physician and private practice owner, specializing in Mohs Micrographic Surgery, general dermatology, cosmetic dermatology and cosmetic surgery. He is a Texas native, an established figure in the field of Dermatology, and a father of three.
Hosts: Adam Alfalahi, Jack Jackson, Winston Lee
2022-02-2816 min
Cookin Careers1 - Paul GenenderMr. Genender is a litigator and court lawyer, leader for Weil, Gotshal & Manges LLP's litigations practice in Texas, Duke graduate, enthusiastic MFFL (Mavs fan for life), former Marksman, and a father of three.
Hosts: Adam Alfalahi, Jack Jackson, Winston Lee
2022-02-0737 min
The FinReg PodThe Rise and Crackdown of China's Tech PowerWinston Ma is the author of “The Digital War: How China's Tech Power Shapes the Future of AI, Blockchain and Cyberspace.” The book details the profound global implications as China's digital economy moves from a consumer-focused phase to an enterprise-oriented one, with a focus on the Internet of Things, AI, blockchain, cloud computing, and data analytics. In this episode, Winston discusses the rise of mobile payments in China, China’s crypto ban and digital yuan rollout, and the recent government crackdown on tech companies. Winston’s Twitter: @Winston_W_Ma Related Links...
2021-10-2048 min
Kopitiam ConversationsEpisode 003: The "Joy of Work" Mindset (Guest: Daniel Lee Kwan Leong, Co-Founder of FirstJoy, Principal Consultant, Trainer, Coach & Author)This is Episode 3.
My guest is Daniel Lee Kwan Leong, Co-Founder of FirstJoy, an organisation that specialises in management & leadership programs and employee engagement solution in Malaysia. Together with his wife Angeline, he leads FirstJoy as its Principal Consultant, Trainer, Coach & Author.
Daniel specialises in leadership and thinking subjects that brought him to seven countries in Asia, namely, Malaysia, Hong Kong, Singapore, Indonesia, Thailand, Vietnam and the Philippines. He has recently pivoted and trained many online sessions. Amongst them, a session with more than 1,200 logins across Asia, Middle East and Africa. Before his 14 years in...
2021-07-2933 min
LEE JACKSON Watches -Luxury/Vintage. Collecting Watches Podcast with America's Finest WatchmanLee Jackson Watches- Luxury and Vintage Watches. Buying, Collecting and Enjoying Watches with America's Finest Watchman episode 136Here he is again, just for you. Listen carefully and you might just learn something from the man who started it all.
We discuss brands like Hanhart, Harwood, H.Winston, Heuer, Illinois, IWC, Longines, Le Coultre, Lemania and much more.
What are good unknown brands for collecting, What to look for and what to avoid. Sharpen your skills and knowledge on off beat brands.
Lee is having fun and it shows, enjoy.
---
Send in a voice message: https://podcasters.spotify.com/pod/show/lee-jackson93/message
Support this podcast: https://podcasters.spotify...
2021-07-1130 min
Divas and DucketsGentrification and Home OwnershipWe're wrapping Home Ownership Month with Winston Robinson, creator of the housing fair known as A Vibe Called Fresh CLT. Winston shares his passion with the Divas on the effects of gentrification and why home ownership, especially knowing WHERE to buy, is so important.
Where You Can Find Us: https://linktr.ee/divasandduckets
Winston Contact Information
IG: @AVibecalledfrshclt
Check it out: creativemornings.com/talks/winston-robinson
RESOURCES
Anywhere: Check with your local county tax assessor for property tax assistance. There may be programs you are eligible for...
2021-06-251h 09Divas and DucketsGentrification and Home OwnershipWe're wrapping Home Ownership Month with Winston Robinson, creator of the housing fair known as A Vibe Called Fresh CLT. Winston shares his passion with the Divas on the effects of gentrification and why home ownership, especially knowing WHERE to buy, is so important.
Where You Can Find Us: https://linktr.ee/divasandduckets
Winston Contact Information
IG: @AVibecalledfrshclt
Check out: creativemornings.com/talks/winston-robinson
RESOURCES
Anywhere: Check with your local county tax assessor for property tax assistance. There may be programs you are eligible for. Also, conduct...
2021-06-241h 09
The Digital Fabrication Experiment PodcastEp. 067 - Vaxxed!Ed goes additive shopping. Chris refines his career/life plan. Winston designs for injection molding. Chris deals with a complicated work holding challenge. Ed dials in speeds/feeds for 2-color HDPE composite parts. Winston dreams of an ATC.
Available now on iTunes (link in bio), Spotify and the Google Play Store.
Or stream directly from
https://dfxpodcast.efk3.com
2021-05-2159 min
Moment of ClarityMoment of Clarity #623 - Medea Benjamin On Peace Activism, Misty Winston On Assange & Alan McLeod On Herbicide Dumps!Medea Benjamin from CODEPINK talks about Peace Activism. Lee then interviews Misty Winston talks about fighting Twitter Trolls and Julian Assange. Alan McLeod from Mint Press News talks to Lee Camp about the plan to dump Herbicide on the people.
2021-03-311h 59Moment of ClarityMoment of Clarity #623 - Medea Benjamin On Peace Activism, Misty Winston On Assange & Alan McLeod On Herbicide Dumps!Medea Benjamin from CODEPINK talks about Peace Activism. Lee then interviews Misty Winston talks about fighting Twitter Trolls and Julian Assange. Alan McLeod from Mint Press News talks to Lee Camp about the plan to dump Herbicide on the people.
2021-03-311h 59
The Better Barber by Reggie WinstonLee McCullers | The Better Barber Podcast S1E6The Better Barber Podcast, consisting of Reggie Winston and Amazin Ant, invited special guest Lee McCullers to discuss various topics. Topics including being a barber instructor, 17 years in the industry, learning from the O.G.'s, and the challenges the barbering industry faces . Want to be a guest? Comment below and lets work to make barbers better.
Let's connect.
Social links below
Website: https://www.reggiewinston.com/
YouTube: https://www.youtube.com/reggiewinston...
Facebook: https://www.facebook.com/influentialb...
Instagram: https://www.instagram...
2020-12-291h 17
Winston'New York, New York', a Rhapsody, a Eulogy / Winston'Start spreading the news,' . . . I'm 'longing to stray'. . . . Or not. The death of the 'Big Apple', of 'Gotham', of 'Metropolis', of the streets that blessed us with Sinatra and Holiday, . . . Ruth and Gehrig, . . . Dimaggio and Mantle. Streisand and Woody, . . . Kubrick and Scorsese, . . . Tito and Willie. From 'Sugar Ray' to 'Raging Bull'. From Whitman to Stan 'the Man' Lee. And between, 'The Godfather', 'West Side Story', Broadway. . . . Heck, Spidey, the Avengers, Batman! NYC, capital of the world, free and unfree! Or once . . . If this is not the Apocalypse, it's damn close. . . . Join...
2020-10-031h 08
The Digital Fabrication Experiment PodcastEp. 057 - Hot and BotheredChris goes CNC shopping again. Winston is programming for big boy machines. Eddie uses some unplanned down time to improve his shop layout and material storage. They have an honest talk about transitioning from job shop work to making their own products. Eddie brings on a subcontractor to maintain on-time delivery.
Available now on iTunes (link in bio), Spotify and the Google Play Store.
Or stream directly from
https://dfxpodcast.efk3.com
Links:
NC Viewer by Xander Luciano - Browser-based gcode visual backplotting tool - ht...
2020-09-141h 09
The Digital Fabrication Experiment PodcastEp. 056 - Transparent CarbonEddie explores diamond tooling in his never ending quest for better surface finishes. Winston engineers away on the future Nomad and Chris dials in his career.
Links:
Marvin Groeb - Aerospace machining on a Kern Vario shot glorious 4K video - https://www.youtube.com/watch?v=hM5MupXyqq0
2020-08-301h 07
The Digital Fabrication Experiment PodcastEp. 055 - CNC DreamsChris and Winston are joined by the ever delightful Sami Woolhiser. They talk about maker burnout and how to deal with it. Lots of great tips on how to tackle big projects by starting small. Eddie take the night off to finish a rush job.
Links:
Sami Woolhiser (@gosamilee on IG) - https://www.instagram.com/gosamilee/
Autodesk Advanced Manufacturing Summit 2020 (Virtual) - https://www.autodesk.com/campaigns/advmfg-summit/overview
2020-08-131h 11
The Digital Fabrication Experiment PodcastEp. 054 - Lean & ShineDFX54 - Lean and Shine
Chris goes 5-axis machine shopping at the day job. Ed digs into Neo twinsies and diamond tooling. Winston triggers a conversation about lean improvements around the shop. Ed takes that as a cue to brag about his new endmill organizer system.
https://dfxpodcast.efk3.com
Links:
ekramer3 tool drawer organizer tray - https://www.thingiverse.com/thing:4541284
Pocket NC rotary table chip guard - https://www.thingiverse.com/thing:4541268
2020-08-021h 17
The Digital Fabrication Experiment PodcastEp. 053 - Summer Shop TalkThe guys have been keeping busy in their respective shops as the mercury rises. Ed squeezes in some fun titanium parts on the Neo between client jobs. Winston knocks out some rockets and his Pocket NC gets a new suit. Chris gets his latest UMC-500 workholding idea dialed in on the first production parts.
Links:
The Marc Reis Flop (@causeimcnc on IG) - https://www.instagram.com/p/B3_0DYOIQxn
2020-07-161h 04
The Digital Fabrication Experiment PodcastEp. 051 - Desktop CNC Golden Age?The guys discuss the exciting new machine recently teased by Bantam Tools. Ed has an update on the new Pocket NC Pro currently under development. Winston wraps up his Skeloko LED bling video. Chris is getting in the zone on the UMC-500 and Ed shares his lessons learned after shipping off his first big commercial Neo job.
Links:
Autodesk Fusion 360 2020 Roadmap - https://www.autodesk.com/products/fusion-360/blog/fusion-360-roadmap-update-2020/
Bantam Tools New Machine Announcement - https://www.instagram.com/p/CBOHANupWjj
2020-06-171h 09
The Digital Fabrication Experiment PodcastEp. 049 - Shop 'till You DropShop updates. Chris takes delivery of his UMC-500. Winston lights up Skeloko Datron-style. Eddie gets to work on his first big commercial job for the Neo. The workholding ecosystem for hobby-class CNC machines is looking promising. Saunders Machine Works introduces a sweet new aluminum fixture plate for the Shapeoko.
https://dfxpodcast.efk3.com
2020-05-211h 05
The Digital Fabrication Experiment PodcastEp. 046 - Viral VitaSami Woolhiser returns for a chat about maker life under lockdown. Team DFX is working on Covid-19 supplies. Eddie experiments with Fusion’s Rotary machining strategy on the Neo’s 4th axis. Chris continues to be essentially essential and Winston knocks out some awesome live streams from the home shop.
Links
Maker Mask - https://www.makermask.com/
Real Engineering on Low Cost Ventilators - https://www.youtube.com/watch?v=7vLPefHYWpY
Fritz & Pieces Molded Face Shield Frame - https://www.instagram.com/p/B-YbnTKgSSj
DFX Podcast - https://dfxp...
2020-04-0756 min
The Digital Fabrication Experiment PodcastEp. 045 - Lockdown LifeDFX45 - Lockdown Life
Winston lives his best life under the LA lock-down. Chris experiences spindles kisses. Ed gets his new Neo up and running.
Bonus content: Chris and Winston talk more about COVID-19 at the end of the show.
Links
Mark Rober - "How to See Germs Spread": https://youtu.be/I5-dI74zxPg
Prusa on Being Proactive as a Business: https://blog.prusaprinters.org/prusa-research-coronavirus-pandemic-and-how-important-it-is-to-be-two-steps-ahead/
PocketNC Courses: https://courses.pocketnc.com/
MasterCAM Resources: https://my.mastercam.com/Learning/Tutorials
2020-03-251h 19
The Digital Fabrication Experiment PodcastEp. 044 - Subtractive + Subtractive = Additive?Shop updates. And new machines all around. Winston updates us on progress with his new 3D printer. The guys discuss coolant and initial tooling strategies for the Neo and UMC-500. Chris recaps his recent Saunders Machine Works visit. Winston does rocket science.
Links
T-Splines Three Ways - Paul Sohi’s AU2019 session - https://www.autodesk.com/autodesk-university/class/T-Splines-Three-Ways-2019
Intro to 5-Axis Machining - Hand’s-On Training at SMW - https://www.nyccnc.com/events/#19478
The Chip Rag Newsletter from SMW - https://chiprag.com
DFX Podcast - https://dfxpodcast.efk3...
2020-03-1052 min
The Digital Fabrication Experiment PodcastEp. 043 - Chris 2.0Winston does WORKBENCHcon. Maker? Machinist? The guys ponder labels. Chris ‘haas’ some big news to share and Eddie gets ready for a visit from the new machine stork.
Links
Georgia Tech Invention Studio - https://www.instagram.com/gtinventionstudio/
Autodesk Fusion 360 Academy Portland - https://academypdx.fusion360.events-autodesk.com/
ManCrafting - https://www.instagram.com/mancrafting/
DFX Podcast - https://dfxpodcast.efk3.com
2020-02-2656 min
The Digital Fabrication Experiment PodcastEp. 042 - Garage GabEd lights up the garage as he enters the final stretch for his Datron Neo delivery. Chris gets a garage of his own. Winston is enticed by additive. Chris designs a hero part for MD&M West. Can a fellow get a drink? Ed struggles to find an ethanol vendor.
Links
MD&M West - https://mdmwest.mddionline.com/
Maker Summer School - https://www.makersummerschool.com/
DIY Perks LED Light Build - https://www.youtube.com/watch?v=DhbMnQt14_o
2020-02-131h 06
The Digital Fabrication Experiment PodcastEp. 041 - Sami WoolhiserWinston and Eddie are joined by Sami Woolhiser (@avidcnc & @gosamilee), a Portland maker and digital fabrication evangelist at Avid CNC. Sami shares what she loves about the Portland creative maker scene and digital fabrication community building.
Links
Sami Woolhiser (@gosamilee on IG) - https://www.instagram.com/gosamilee/
Sami at work (@avidcnc on IG) - https://www.instagram.com/avidcnc/
Avid CNC Youtube channel - https://www.youtube.com/channel/UCUURXMoW6I66UPUohD-Dkeg
Frank Howarth (@frank.howarth on IG) - https://www.instagram.com/frank.howarth/
The Trash Hackers Collective - https...
2020-01-3049 min
The Digital Fabrication Experiment PodcastEp. 040 - Brain FoodThe guys discuss learning resources for CNC newbies. Eddie revisits Ti and stainless steel on the Pocket NC V2-50. Chris wraps up his Johnny 5 part. Winston builds an infinity mirror to reflect on the depth of his video backlog.
Links
Autodesk Fusion 360 Tutorials - https://f360ap.autodesk.com/courses
Lars Christensen - https://www.instagram.com/larschristensen/
Updated Fusion 360 post processor for Pocket NC - https://cam.autodesk.com/posts/download.php?name=pocket%20nc
2020-01-1455 min
The Digital Fabrication Experiment PodcastEp. 038 - Machine DreamsThe guys talk about the risk/reward tradeoffs of buying a vertical machining center. Eddie makes a pilgrimage to Saunders Machine Works. Winston sharpens a pencil for Star Wars. And Chris… lives.
Links
Kevin Ellingson (@mechvantage) - https://www.instagram.com/mechvantage/
Saunders Machine Works Training - https://www.nyccnc.com/events/
Free Access to Generative Design in Fusion 360 Until Dec 31 2019 - https://www.autodesk.com/products/fusion-360/blog/fusion-360-free-generative-design-until-2020/
DFX Podcast - https://dfxpodcast.efk3.com
2019-12-1751 min
The Digital Fabrication Experiment PodcastEp. 037 - The Johnny 3Ed, Chris and Winston have updates on their respective parts for the Saunders Machine Works Johnny 5 build.
Chris makes some big moves at work. The guys probe Winston on a new C3D product. Eddie puts in some solid Fusion time working on Neo workholding.
DFX Podcast Instagram Account: @dfxpodcast
DFX Website: https://dfxpodcast.efk3.com
2019-12-0853 min
The Digital Fabrication Experiment PodcastEp. 032 - Just Do ItEddie is AWOL at EMO while Winston and Chris hold down the DFX fort. The West Coasters discuss their WESTEC visit. Education vs experience, which is more important in the shop? Chris contemplates his future while Winston’s camping knife project is on point
2019-10-0150 min
The Digital Fabrication Experiment PodcastEp. 031 - Perfect TimingEddie and Winston welcome Chris as a permanent third host on DFX. Winston gets TIG-gy with it. Chris is hyped about learning HyperMILL. Eddie is heading off to EMO. Winston indexes the Yoda-Budda. Chris talks meteorite machining. Oh and Eddie drops some big news.
2019-09-1655 min
The Digital Fabrication Experiment PodcastEp. 030 - That Sparkle LifeChris Lee joins us once again to talk about his adventures in machining steels and titanium on the Pocket NC. Winston might make a stab at the spinner world, and Eddie talks tombstones and spills the beans on some exciting Neo news.
Links
Dutchclass_watch (@dutchclass_watch on IG) - https://www.instagram.com/dutchclass_watch
Prince Customs (@princecustoms on IG) - https://www.instagram.com/princecustoms
ILTMS Darksaber - https://www.youtube.com/watch?v=QrFZKqeuCnA
Carbide 3D Camp Knife video series - https://www.youtube.com/playlist?list=PLS3hpxHvkxfDAybGBxeON-h2EF7...
2019-09-0359 min
The Digital Fabrication Experiment PodcastEp. 029 - Autodesk Fusion 360 Academy Portland RecapThe DFX team is back from Portland and Chris Lee joins us for a recap of Autodesk’s Fusion 360 Academy. We met a few DFX listeners and a whole Marvel Universe of our favorite Instamachinist super heroes. We talk about all the good stuff coming to Fusion later this year and in 2020.
Links
Matsuura custom fixture developed using Generative Design in Fusion 360 - https://www.youtube.com/watch?v=-9-BoJnXM8A
Chris Lee (@chrislee.design on IG) - https://www.instagram.com/chrislee.design/
AvidCNC (@avidcnc on IG) - https://ww...
2019-08-191h 23
LiveWild RadioEp. 14 - David Lee - The Passionate PeakerWhen our next guest saw pictures of alpine climbing in National Geographic as a kid, it sparked a deep fascination with the mountain. While a lot of canoeing happened in between (aka the Passionate Paddler), David Lee rediscovered his desire to climb mountains in his forties (aka the Passionate Peaker). From his first forays into winter camping to heading out to climb Mt. Rainier at 14,411 ft, David reveals his journey exploring remote peaks while still holding down a full-time career. A drive to keep gaining skills and take on new challenges fuels him to keep pushing his boundaries when m...
2019-07-151h 31
The Digital Fabrication Experiment PodcastEp. 027 - Steel Mill Thrill
Ed gets a bigger shank. Winston's Nomad goes on the 'O1' diet. Coping with Project Egress envy. Latest news on Winston's acid trip a.k.a. DIY anodizing.
Links
Bantam Tools Micro-Machining Challenge - https://www.instagram.com/explore/tags/btmicrochallenge/
Project Egress - https://airandspace.si.edu/events/project-egress-build
2019-07-1149 min
The Digital Fabrication Experiment PodcastEp. 026 - Grate ExpectationsWinston's latest video explodes on Youtube. Eddie goes shopping. Both guys are turning it up a notch. Winston experiments with DIY anodizing while Eddie counts amps.
Links
Datron - https://www.datron.com
Winston’s Viral Mac Pro Cheese Grater Video - https://www.youtube.com/watch?v=s29YZqe9Cso
Soap Dish Inspiration Video - https://www.youtube.com/watch?v=BLD4dFoXC7o
2019-06-271h 11
The Digital Fabrication Experiment PodcastEp. 025 - Make: EndgameChris Lee joins us again as we discuss the demise of Maker Media (the company behind Make: and Maker Faire). Winston discovers that chip clearing with air is a blast. Chris storms right into simultaneous 5-axis machining with a stormtrooper helmet project. Eddie rides out a storm of his own.
Links
Maker Faire halts operations and lays off all staff - https://techcrunch.com/2019/06/07/make-magazine-maker-media-layoffs/
2019-06-111h 02
The Digital Fabrication Experiment PodcastEp. 024 - Faire GameChris Lee joins us once again to talk about his and Winston’s trip to Bay Area Maker Faire 2019. Eddie has been busy with Fusion 360. Winston discusses his Shapeoko-based CNC camera rig idea. Chris talks about his new 5-axis crush. And we’re all going to the inaugural Fusion 360 Academy in August.
Links
Chris Lee (@chrislee.design on IG) - https://www.instagram.com/chrislee.design/
Autodesk Fusion 360 Academy, Aug 5-7 2019, Portland OR - https://academypdx.fusion360.events-autodesk.com/
Edge Precision on Youtube - https://www.youtube.com/channel/UCCkSr3M8GXbS4txqPY7OMxQ
2019-05-3157 min
The Digital Fabrication Experiment PodcastEp. 023 - Uncommanded MovesWinston’s spindle takes the wheel. Eddie makes little holes and big plans. Winston is on ‘board’ for Maker Faire and Eddie talks turning. Oh, and flappy drones too.
Links
Hummingdrones Campaign on Indiegogo - https://www.indiegogo.com/projects/robo-firefly-the-first-insect-like-consumer-drone/
2019-05-1656 min
The Digital Fabrication Experiment PodcastEp. 022 - Seven PoundsWinston machines away seven pounds of aluminum to roll out his latest big project. Eddie works through some issues with chatter and long reach stub tooling. Winston discovers that copper can always use a little pinch of tellurium. And both of the guys are happy with some new work holding ideas they put to use on recent projects.
Links
145 Copper at McMaster-Carr - https://www.mcmaster.com/copper-alloy-145
Straight Shank ER25 Collet Chucks - https://www.maritool.com/Tool-Holders-Straight-Shank-ER25-Straight-Shank/c23_28_177/index.html
2019-05-0357 min
The Digital Fabrication Experiment PodcastEp. 021 - Spring Shop UpdateWinston makes progress on the mystery project he is taking to Bay Area Maker Faire. Eddie finds Pocket NC small piece workholding success with a new collet chuck. The guys talk shop and Winston's invite to Atlanta for the Home Depot ProSpective event.
2019-04-2055 min
The Digital Fabrication Experiment PodcastEp. 020 - Keeping it 'Fresh'The guys talk about the tension between creating unique designs, sharing and the temptation to simply copy the work of others.
Eddie rethinks his delrin gear production workflow in search of a 2X productivity boost. Winston is working on something big for Bay Area MakerFaire.
Links
Alice Coatduck (@alice_coatduck on IG) - https://www.instagram.com/alice_coatduck/
Helical Fresh (@helical_fresh on IG) - https://www.instagram.com/helical_fresh/
2019-04-041h 10
Calvary Bible ChurchHomegoing Service for Carlyle Winston CartwrightHomegoing Service for Carlyle Winston Cartwright
2019-03-211h 37
The Digital Fabrication Experiment PodcastEp. 018 - High RPM FunEddie tests the hot new machine from Pocket NC. But his upcoming visit to their new shop in snowy Montana will surely cool him down. Winston recaps his WorkbenchCon experience and decompresses after his hectic run at the annual Autodesk CAM Challenge.
Links
Giaco (@giacowhatever on IG) - https://www.instagram.com/giacowhatever/
Alice (@alice_coatduck on IG) - https://www.instagram.com/alice_coatduck/
2019-03-071h 15
The Rise Of The Creative PodcastEpisode 64: Creating Our History W/ Winston Ward & Ash Slays #BlackHistoryMonthEpisodeOn this installment of The Rise of The Creative Podcast, hosts Winston Ward & Ash Slays discuss their favorite creatives in Black History! This list includes Spike Lee, Quincy Jones, Bob Marley and a few other amazing creatives. They also discuss what it's like to be young, black & gifted in this current generation. Stay tuned for more episodes and lets keep the conversation going on Instagram at @RiseOfTheCreativeNYC
2019-02-2331 min
The Digital Fabrication Experiment PodcastEp. 017 - Chris LeeWe talk with Chris Lee, fellow instamachinist and Injection Mold Design Engineer at MR Molds. Chris recently made a career pivot from a job in the medical field to a big move into manufacturing. We'll talk about the origins of that change and his introduction to design, CNC and digital manufacturing technologies and much more on this week's episode.
Links
Chris Lee (@chrislee.design on IG) - https://www.instagram.com/chrislee.design
DXN Provisions (@dxn_provisions on IG) - https://www.instagram.com/dxn_provisions/
Winston's AutodeskBowlChallenge - https://www.instagram.com/explore...
2019-02-2159 min
The Digital Fabrication Experiment PodcastEp. 016 - Team Subtractive talks AdditiveDFX16 show notes
Eddie and Winston explore where additive fits in their world of team subtractive. Edde talks about his latest production job. Winston is heading to WORKBENCHcon this month. Both co-hosts are excited about sharp objects heading their way. Shop updates and other thoughts on small-time maker life.
Links
Workbenchcon - Atlanta, GA February 21-23, 2019 - https://www.workbenchcon.com/
Medical Design & Manufacturing (MD&M) West, Anaheim, CA February 5-7 2019 - https://mdmwest.mddionline.com/
Rob Lockwood (@rob.awesome.lockwood on IG) - https://www.instagram.com/rob.awesome.lockwood/
...
2019-02-071h 03
The Digital Fabrication Experiment PodcastEp. 015 - More MetalWinston finishes his Shapeoko enclosure with only minor regrets. Eddie tests some speeds and feeds for dry Titanium machining. Both guys see some good improvements in surface finish strategies for aluminum. Winston gets wacko with macro and Eddie gives his vise a lift.
Links
Daniel Jansson (@switchandlever on IG) - https://www.instagram.com/switchandlever/
2019-01-231h 11
The Digital Fabrication Experiment PodcastEp. 014 - A New Year
Winston and Eddie close out the year and talk about their plans for 2019. Both guys make progress on their Shapeoko enclosures. Eddie talks surface finishing and Winston updates us on his plans for expanding the content on the Carbide 3D YouTube channel.
Links
Ball End Mill stepover/roughness depth calculator - https://schnittdaten.meusburger.com/theoretical-roughness-depth/
2019-01-081h 14
The Digital Fabrication Experiment PodcastEp. 012 - Maker Road Trip and AU2018 Recap
Winston and Eddie recap Winston's "Making It Across America" road trip and their inaugural attendance at Autodesk University 2018.
Links
Autodesk University 2018 - Recorded Sessions - https://www.autodesk.com/autodesk-university/las-vegas/recorded-sessions
Scott Moyse’s AU2018 session: 101 Fusion 360 Tips and Tricks - https://www.autodesk.com/autodesk-university/class/101-Fusion-360-Tips-and-Tricks-2018
Autodesk University recorded sessions from prior years - https://www.autodesk.com/autodesk-university/au-online
No Dumb Questions Podcast (Destin Sandlin and Matt Whittman) - https://www.nodumbquestions.fm
Vince Ramirez - @vince.fab on IG - https://www...
2018-11-2850 min
The Digital Fabrication Experiment PodcastEp. 008 - Part-Time All the Time
Eddie and Winston talk about the stresses of growing their respective ventures while working full time day jobs. And the moves (literally in Winston's case) they are making to do things differently in 2019 and beyond. Find out why Winston will need a transcontinental extension cord for his Nomad while Eddie steels himself for a 4140 steel job and thanks a fellow instamachinist for his help on a recent workholding collaboration. And Winston goes topographic in some walnut.
Links
Chris Lee on IG (@chrislee.design) - https://www.instagram.com/chrislee.design
Bobby Duke Arts YouTube...
2018-10-0251 min
The Digital Fabrication Experiment PodcastEp. 007 - Edward FordWinston and Eddie are joined by Mr. Shapeoko himself, Edward Ford.
Ed Ford (@shapeoko) shares his motivations for creating the Shapeoko, one of the most popular small CNC milling machines on the planet.
And we'll hear all about his and Winston's visit to IMTS 2018 and more.
Winston is off to yet another Maker Faire soon while Eddie fixates on 5-axis fixturing once again.
Links
Ed Ford on IG (@shapeoko) - https://www.instagram.com/shapeoko/
Vince Ramirez on IG (@vince.fab) - https://www.instagram.com/vince.fab/
Richard (@jpl_richard) - https://www...
2018-09-2148 min