Shows
What's Eric EatingEpisode 478 - The Ultimate Houston Dessert DraftOn today's episode of the podcast, you're in for something a lot sweeter than normal... because well it's The Ultimate Houston Dessert Draft! Listen as Eric, alongside Local Foods Group's Chelsea Thomas, the Hangry Houstonian Danielle Dubois, Fluff Bake Bar's Becky Masson, Underground Creamery's Josh Deleon, and Heights Grocer's Mary Clarkson attempt to craft the best dessert lineup.
The drafters will be selecting a lineup of 6 desserts in total withe each drafter making one selection in each of the following categories: cookies, cake, frozen, pastries, tableside, and a wild card. For the tableside category, drafters may select any...2025-07-1554 min
The CAD Manager Confessions PodcastE63: JR Smith InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 63.In this episode, I'll be sharing an interview I did with JR Smith as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.JR can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/jr-smith-7628515/ Show Information:Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfe...2025-05-0947 minThe CAD Manager Confessions PodcastE62: Jason Peters Interview (Round 2)You’re listening to the CAD Manager Confessions Podcast, Episode 62.In this episode, I'll be sharing an interview I did with Jason Peters as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.Jason can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/jason-peters-1b2a74188/ Original Podcast Episode 24: https://open.spotify.com/episode/2N7Ppq38lKV4mmWRKfkbvt?si=SQaZe1cxSXu6JkFkC-usKg AUGI Article: https...2025-05-0957 minThe CAD Manager Confessions PodcastE61: Russell Stanford InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 61.In this episode, I'll be sharing an interview I did with Russell Stanford as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.Russell can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/russellstanford/ Show Information:Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfe...2025-05-0946 minThe CAD Manager Confessions PodcastE60: Mike A. Porter InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 60.In this episode, I'll be sharing an interview I did with Mike A. Porter as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.Mike can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/mike-a-porter-30502583/ Show Information:Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the p...2025-03-0355 minThe CAD Manager Confessions PodcastE59: Cory Daugherty InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 59.In this episode, I'll be sharing an interview I did with Cory Daugherty as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.Cory can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/cory-daugherty-7407606/ Show Information:Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfect set of plans.Each week, we’ll be doing deep dives into what CAD Managers deal with daily as they m...2025-02-221h 14The CAD Manager Confessions PodcastE58: Jason Renaud InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 58.In this episode, I'll be sharing an interview I did with Jason Renaud as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.Jason can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/jason-renaud-b36295153/ Website: www.thestickandstone.com Website: www.glamourtribevinyl.com Show Information:Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfect set of plans.Each week, we’ll be doing deep dives into w...2025-02-161h 05The CAD Manager Confessions PodcastE57: Ian Philpott InterviewYou’re listening to the CAD Manager Confessions Podcast,Episode 57.In this episode, I'll be sharing an interview I did withIan Philpott as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.Ian can be found on the following social platforms:Linkedin: https://www.linkedin.com/in/ian-philpott-0a784733/Show Information:Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perf...2025-02-101h 10The CAD Manager Confessions PodcastE56: Jason Peckovitch InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 56.
In this episode, I'll be sharing an interview I did with Jason Peckovitch as part of my CAD/BIM Masterclass where I interview some of the best CAD/BIM Leaders across different industries.
Jason can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/jasonpeckovitch/
X (Twitter): https://x.com/ThatBIMGuy
AUGI: https://www.augi.com/articles/detail/2024-industry-insights-from-thatbimguy
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfect set of plans.
Each week, we’l...2025-02-0158 minThe CAD Manager Confessions PodcastE55: Rina Sahay InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 55.
In this episode, I'll be sharing an interview I did with Rin Sahay as part of my next CAD/BIM Manager Masterclass series where I interview some of the best CAD/BIM Managers and Leaders across different industries.
Rina can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/rsahay1/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in th...2025-01-191h 00
Untold StoriesRedefining Home: A Story of Resilience With Amaris DeLeon This episode contains discussions of abuse and domestic violence.Amaris DeLeon takes us on an emotional journey from her tumultuous childhood to finding a sense of belonging at the University of North Florida. Amaris's story begins with a hot and silent car ride, a symbol of the strained relationship with her mother and the hardships she faced growing up. As she navigates her way through academic achievements and the challenges of living in an abusive home, Amaris finds hope and community in UNF's Interfaith Center.Her tale is one of resilience as she battles through...2024-08-2500 minThe CAD Manager Confessions PodcastE54: CAD/BIM Manager Masterclass Series - Joshua Paulan InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 54.
In this episode, I'll be sharing an interview I did with Joshua Paulan as part of my next CAD/BIM Leadership Masterclass series where I interview some of the best CAD/BIM Leaders across different industries.
Josh can be found on the following social platform:
Linkedin: https://www.linkedin.com/in/joshua-paulan-623bb915/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their...2023-12-3145 minThe CAD Manager Confessions PodcastE53: CAD/BIM Manager Masterclass Series - Tom Schrecengost InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 53.
In this episode, I'll be sharing an interview I did with Tom Schrecengost as part of my next CAD/BIM Manager Masterclass series where I interview some of the best CAD/BIM Managers across different industries.
Tom can be found on the following social platforms:
https://www.linkedin.com/in/thomas-schrecengost-717734132/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of t...2023-10-271h 17The CAD Manager Confessions PodcastE52: CAD/BIM Manager Masterclass Series - John Mayo InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 52.
In this episode, I'll be sharing an interview I did with John Mayo as part of my next CAD/BIM Manager Masterclass series where I interview some of the best CAD/BIM Managers across different industries.
John can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/john-mayo-pe-cfm-cme-05362118/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their purs...2023-10-161h 00The CAD Manager Confessions PodcastE51: CAD/BIM Leadership Masterclass Series #3 - Reed Weinstock InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 51.
In this episode, I'll be sharing an interview I did with Reed Weinstock as part of my CAD/BIM Leadership Masterclass series #3 where I interview some of the best CAD/BIM Leaders across different industries.
Reed can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/reed-weinstock-b1312946/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the...2023-08-131h 09The CAD Manager Confessions PodcastE50: CAD/BIM Leadership Masterclass Series #4 - Creg Dieziger Interview
You’re listening to the CAD Manager Confessions Podcast, Episode 50.
In this episode, I'll be sharing an interview I did with Creg Dieziger as part of my CAD/BIM Leadership Masterclass series #4 where I interview some of the best CAD/BIM Leaders across different industries.
Creg can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/creg-dieziger-1760441a/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Manag...2023-08-0655 minThe CAD Manager Confessions PodcastE49: CAD/BIM Leadership Masterclass Series #4 - Gari Lynn Cunningham InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 49.
In this episode, I'll be sharing an interview I did with Gari Lynn Cunningham as part of the CAD/BIM Leadership Masterclass Series #4 where I interview some of the best CAD/BIM Leaders across different industries.
Gari Lynn can be found on the following social platforms: Linkedin: https://www.linkedin.com/in/gari-lynn-hessong-21226034/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of t...2023-07-231h 00The CAD Manager Confessions PodcastE48: CAD/BIM Leadership Masterclass Series #4 - Gil Cordle InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 48.
In this episode, I'll be sharing an interview I did with Gil Cordle as part of my CAD/BIM Leadership Masterclass series #4 where I interview some of the best CAD/BIM Leaders across different industries.
Gil can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/gilcordle/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with daily a...2023-07-101h 21The CAD Manager Confessions PodcastE47: CAD/BIM Leadership Masterclass Series #3 - Nicolas Paquet InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 47.
In this episode, I'll be sharing an interview I did with Nicolas Paquet as part of my CAD/BIM Leadership Masterclass series #3 where I interview some of the best CAD/BIM Leaders across different industries.
Nicolas can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/nicolas-paquet-a9505242/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of th...2023-05-231h 15The CAD Manager Confessions PodcastE46: CAD/BIM Leadership Masterclass Series #3 - Susan Clay InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 46.
In this episode, I'll be sharing an interview I did with Susan Clay as part of my CAD/BIM Leadership Masterclass series #3 where I interview some of the best CAD/BIM Leaders across different industries and from around the world.
Susan can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/susan-clay-444b0920/
Instagram: https://www.instagram.com/scdesignology/
Show Information:
Hi! I’m your ho...2023-05-181h 25What's Eric EatingEpisode 281 - Josh Deleon of Underground CreameryToday on the podcast Eric is joined by Michael Fulmer to discuss the latest from the Houston restaurant and bar scene. The two speak about Izakaya transforming into a new gulf coast seafood concept, historic Houston area barbecue restaurant The Swinging Door closing it's doors permanently, and acclaimed Houston chef Anita Jaisinghani's James Beard nomination for her cookbook. In the Restaurants of the Week section Mandito's and Verde Garden are featured. In the Guest of the Week portion Eric is joined by Josh Deleon of Underground Creamery. Josh speaks with Eric about the decision behind making his own ice cream...2023-05-041h 16The CAD Manager Confessions PodcastE45: CAD/BIM Leadership Masterclass Series #3 - Stephen Walz InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 45.
In this episode, I'll be sharing an interview I did with Stephen Walz as part of my CAD/BIM Leadership Masterclass series #3 where I interview some of the best CAD/BIM Leaders across different industries.
Stephen can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/stephen-walz-6ab141a/
New Book: https://packt.link/fXxBi
Show Information:
Hi! I’m your host Eric DeLeon and t...2023-04-281h 10The CAD Manager Confessions PodcastE44: CAD/BIM Leadership Masterclass Series #2 - George Othitis InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 44.
In this episode, I'll be sharing an interview I did with George Othitis as part of my CAD/BIM Leadership Masterclass series #2 where I interview some of the best CAD/BIM Leaders across different industries.
George can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/gothitis/
Maryland CAD User Group: https://www.linkedin.com/groups/12565449/
Old band's music: https://autumnreignrock.bandcamp.com/
Show Info...2023-04-281h 20The CAD Manager Confessions PodcastE43: CAD/BIM Leadership Masterclass Series #2 - Adam Black InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 43.
In this episode, I'll be sharing an interview I did with Adam Black as part of my CAD/BIM Leadership Masterclass series #2 where I interview some of the best CAD/BIM Leaders across different industries.
Adam can be found on the following social platforms:
https://www.linkedin.com/in/adam-black-88ba9ba5/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursu...2023-04-191h 11The CAD Manager Confessions PodcastE42: CAD/BIM Leadership Masterclass Series #2 - Meredith Chamberlain InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 42.
In this episode, I'll be sharing an interview I did with Meredith Chamberlain as part of my CAD/BIM Leadership Masterclass series #2 where I interview some of the best CAD/BIM Leaders across different industries.
Meredith can be found on the following social platforms:
https://www.linkedin.com/in/meredith-chamberlain-46bb2711/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of th...2023-04-191h 27The CAD Manager Confessions PodcastE41: CAD/BIM Leadership Masterclass Series #2 - Donnia Tabor-Hanson InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 41.
In this episode, I'll be sharing an interview I did with Donnia Tabor-Hanson as part of my CAD/BIM Leadership Masterclass series #2 where I interview some of the best CAD/BIM Leaders across different industries.
Donnia can be found on the following social platforms:
https://www.linkedin.com/in/donniath/
https://twitter.com/DonniaTH
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Ma...2023-04-111h 03The CAD Manager Confessions PodcastE40: CAD/BIM Leadership Masterclass Series #2 - Kelly Sehn InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 40.
In this episode, I'll be sharing an interview I did with Kelly Sehn as part of my CAD/BIM Leadership Masterclass series #2 where I interview some of the best CAD/BIM Leaders across different industries.
Matthew can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/kelly-sehn-113bb718/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is f...2023-04-051h 05
AUGIWORLD The PodcastE17: AUGIWORLD Magazine October 2021 - What Happened to the Digitizer
Welcome to AUGIWORLD THE PODCAST, I’m your Episode #17 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, Paul Li, read his own article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be...2023-03-1922 minAUGIWORLD The PodcastE16: AUGIWORLD Magazine Article March 2023 - Becoming Tenacious by Mark Kiker
Welcome to AUGIWORLD THE PODCAST, I’m your Episode #16 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by reading Mark Kiker’s column straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be found on the following soci...2023-03-1909 minAUGIWORLD The PodcastE15: AUGIWORLD Magazine Article March 2023 - Connecting BIM and BI with VCAD by Francesco Necciari
Welcome to AUGIWORLD THE PODCAST, I’m your Episode #15 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by reading Francesco Necciari’s article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be found on the foll...2023-03-1912 minAUGIWORLD The PodcastE14: AUGIWORLD Magazine Article March 2023 - BricsCAD Tips & Tricks by Craig Swearingen
Welcome to AUGIWORLD THE PODCAST, I’m your Episode #14 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, Craig Swearingen, read his own article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be...2023-03-1911 minThe CAD Manager Confessions PodcastE39: CAD/BIM Leadership Masterclass Series #1 - Steve Lander InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 39.
In this episode, I'll be sharing an interview I did with Steve Lander as part of my CAD/BIM Leadership Masterclass Series #1 where I interview some of the best CAD/BIM Leaders across different industries.
Steve can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/steve-lander-1b345210/
Website: https://www.monkeyflow.co.uk/
Show Information:
Hi! I’m your host Eric DeLeon and this...2023-03-171h 01The CAD Manager Confessions PodcastE38: CAD/BIM Leadership Masterclass Series #1 - Matthew Grigsby InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 38.
In this episode, I'll be sharing an interview I did with Matthew Grigsby as part of my CAD/BIM Leadership Masterclass series #1 where I interview some of the best CAD/BIM Leaders across different industries.
Matthew can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/mdgrigsby/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of t...2023-03-121h 00The CAD Manager Confessions PodcastE37: CAD/BIM Leadership Masterclass Series #1 - Kristina Youngblut InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 37.
In this episode, I'll be sharing an interview I did with Kristina Youngblut as part of my CAD/BIM Leadership Masterclass series #1 where I interview some of the best CAD/BIM Leaders across different industries.
Kristina can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/kristina-youngblut-22a4bb8/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in thei...2023-03-041h 29The CAD Manager Confessions PodcastE36: CAD/BIM Leadership Masterclass Series #1 - Daniel Lench InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 36.
In this episode, I'll be sharing an interview I did with Daniel Lench as part of my CAD/BIM Leadership Masterclass series #1 where I interview some of the best CAD/BIM Leaders across different industries.
Daniel can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/daniel-lench-75213a18/
Show Information:
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their purs...2023-03-021h 08AUGIWORLD The PodcastE13: AUGIWORLD Magazine Article September 2022: AutoCAD: What’s in a Name?Welcome to AUGIWORLD THE PODCAST, I’m your Episode #13 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, Paul Li, read his own article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be found on...2023-02-2611 minAUGIWORLD The PodcastE12: AUGIWORLD Magazine Article February 2022: LayerApps - Filling in the GapsWelcome to AUGIWORLD THE PODCAST, I’m your Episode #12 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, Paul Li, read his own article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be found on...2023-02-2610 minAUGIWORLD The PodcastE11: AUGI.com October 23rd, 2022 Online article: Finding Success with DraftSight - Customer StoriesWelcome to AUGIWORLD THE PODCAST, I’m your Episode #11 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGI.com to life by reading an Online article posted on
October 23rd, 2022 titled Finding Success With DraftSight—Customer Stories written by The DraftSight Team.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Show Notes:
The full Online article can be found here:
https://www.augi.com/articles/deta...2023-02-0813 minAUGIWORLD The PodcastE10: AUGIWORLD magazine February 2023 article: Free Samples by Paul LiWelcome to AUGIWORLD THE PODCAST, I’m your Episode #10 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, PAUL LI, read his own article from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be found on th...2023-01-2619 minAUGIWORLD The PodcastE09: AUGIWORLD magazine May 2022 article: Scripts & Plots (The Sequel) by Paul LiWelcome to AUGIWORLD THE PODCAST, I’m your Episode #09 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, PAUL LI, read his own article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI can be found on the following so...2023-01-2419 minAUGIWORLD The PodcastE08: AUGIWORLD magazine January 2023 Tech Manager column: Onboarding by Mark KikerWelcome to AUGIWORLD THE PODCAST, I’m your Episode #08 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest and AUGI Vice-President & Board of Directors Member, Frank Mayfield, read Mark Kiker’s column straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi...2023-01-2409 minAUGIWORLD The PodcastE07: AUGIWORLD magazine April 2022 article: Plots & Scripts (The Prequel) by Paul LiWelcome to AUGIWORLD THE PODCAST, I’m your Episode #07 Host, Eric DeLeon, AUGI Board of Directors member.
In this episode, we are bringing the pages of AUGIWORLD Magazine to life by having our special guest, PAUL LI, read his own article straight from the pages of AUGIWORLD Magazine.
So sit back, relax, and enjoy this episode of AUGIWORLD THE PODCAST.
Wanna Connect?
To learn more about AUGI go to https://www.augi.com/
AUGI ca...2023-01-2419 min
The CAD Manager Confessions PodcastE35: I'm Back!!!You’re listening to the CAD Manager Confessions Podcast, Episode 35, I'm back!!!
In this episode of the CAD Manager Confessions Podcast, I'll explain my 2022 journey in what I've been up to the past 12 months since the last podcast episode, and what you can expect in 2023 and beyond.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with daily a...2023-01-2323 min
cuSTEM JourneysDropout turned software engineer explains how he found successDropout turned software engineer, Eric Deleon, explains how he found success despite dropping out high school. Eric is a creative designer turned software engineer, and owner of 132 Design. In this interview we discuss Eric's career journey including, how he became a successful entrepreneur, the most-common mistakes entrepreneurs make, how he became a software engineer, and his plans for the future.2022-11-031h 05
The Small Nation Podcast10 | Economic Development 101 | The Small Nation Podcast Featuring Eric PhillipsWelcome to the tenth episode of The Small Nation Podcast (Previously The Friday Small Talk Podcast)!
This podcast is created for anyone interested in entrepreneurship, investing in real estate, and economic development. This episode of The Small Nation Podcast gives insight into what economic traditional development looks like in one the fastest growing counties in Ohio, Union County. How do major manufacturing plants such as Honda impact the local area? What is the correlation between a local chamber of commerce and economic development? What impact does large markets such as Columbus play on smaller communities? These questions...2022-10-0542 minThe CAD Manager Confessions PodcastE34: BIM Management Masterclass Series #2 - Steve DeWittYou’re listening to the CAD Manager Confessions Podcast, Episode 34.
In this episode, I'll be sharing an interview I did with Steve DeWitt as part of Series #2 of my CAD Management Masterclass where I interview some of the best BIM Managers across different industries.
Steve can be found on the following social platform:
Linkedin: https://www.linkedin.com/in/steve-dewitt-54166137/
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit of the perfect set of plan...2021-12-021h 12The CAD Manager Confessions PodcastE33: CAD Management Masterclass Series #4 - Carlos Caminos InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 33.
In this episode, I'll be sharing an interview I did with Carlos Caminos as part of Series #4 of my CAD Management Masterclass series where I interview some of the best CAD Managers across different industries.
Carlos can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/carloscaminos/
Twitter: https://twitter.com/CCaminos_BIM
Hi! I’m your host Eric DeLeon and this podcast is for CAD Mana...2021-12-021h 05The CAD Manager Confessions PodcastE32: CAD Management Masterclass Series #4 - Rob Sinclair InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 32.
In this episode, I'll be sharing an interview I did with Rob Sinclair as part of Series #4 of my CAD Management Masterclass series where I interview some of the best CAD Managers across different industries.
Rob can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/robsinclair/
Twitter: https://twitter.com/PGHCIVIL3D
Hi! I’m your host Eric DeLeon and this podcast is for CAD Mana...2021-12-0250 minThe CAD Manager Confessions PodcastE31: CAD Management Masterclass Series #4 - Mike Thomas InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 31.
In this episode, I'll be sharing an interview I did with Mike Thomas as part of Series #4 of my CAD Management Masterclass series where I interview some of the best CAD Managers across different industries.
Mike can be found on the following social platforms:
Website: http://designandmotion.net
Linkedin: http://linkedin.com/in/mike-thomas-34b768b
Twitter: https://twitter.com/aurbis
Hi! I’m your host Eric DeLeon and...2021-12-021h 15
The CAD Manager Confessions PodcastE30: CAD Management Masterclass Series #4 - Peter ClaytonYou’re listening to the CAD Manager Confessions Podcast, Episode 30.
In this episode, I'll be sharing an interview I did with Peter Clayton as part of Series #4 of my CAD Management Masterclass series where I interview some of the best CAD Managers across different industries.
Peter can be found on the following social platforms:
Linkedin: https://www.linkedin.com/in/peter-clayton-13397915/
Twitter: https://twitter.com/ClaytonsKorner
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in t...2021-12-0252 min
The CAD Manager Confessions PodcastE29: Women In CAD Masterclass #1You’re listening to the CAD Manager Confessions Podcast, Episode 29.
In this special episode of the CAD Manager Confessions Podcast, I interview Stacey Morykin, Danielle Civitillo, & Jisell Howe in the inaugural Women In CAD Masterclass series.
Stacey can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/stacey-morykin-52b5b721/
Twitter: https://twitter.com/StaceyMorykin
Danielle can be found on the following social platform:
LinkedIn: https://www.linkedin.com/in/dcivitillo/
...2021-12-0256 min
Shut Up Stupid PodcastEpisode 14: Part 8 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0817 minShut Up Stupid PodcastEpisode 14: Part 7 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0804 minShut Up Stupid PodcastEpisode 14: Part 6 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0801 minShut Up Stupid PodcastEpisode 14: Part 5 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0807 minShut Up Stupid PodcastEpisode 14: Part 4 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0801 minShut Up Stupid PodcastEpisode 14: Part 3 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0810 minShut Up Stupid PodcastEpisode 14: Part 2 of 8 Be good. Do right. God bless. With Eric DeLeon.In this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!2021-10-0805 minShut Up Stupid PodcastEpisode 14: Part 1 of 8 Be good. Do right. God bless. With Eric DeLeonIn this episode, I reconnect with my buddy Eric DeLeon from Synder, Texas, no relation! We talk about when we first met in San Antonio at the LOL Comedy Club while auditioning for NBC's Stand Up for Diversity competition back in the Summer of 2010. We also catch up on what we've been up to since that day!--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app2021-10-0805 min
Sit Back with Uncle YakEazy-EThis episode I look into the mysterious death of The Godfather of gangster rap, Eric Eazy-E Wright. The late rapper went to the hospital for a cough and died one month later from HIV/AIDS induced pneumonia. Many people close to Eazy-E say his health never deteriorated once while in the the hospital and believe something else was in play that took his life. Eazy-E was no stranger to enemies as he had issues with Dr. Dre, Suge Knight, and even the Jewish Defense League but who played a role in his death?2021-07-021h 15The CAD Manager Confessions PodcastE28: BIM Management Masterclass Series #1 - Matthew KrebsYou’re listening to the CAD Manager Confessions Podcast, Episode 28
In this episode, I'll be sharing an interview I did with Matthew Krebs as part of Series #1 of my BIM Management Masterclass where I interview some of the best BIM Managers across different industries.
Matthew can be found on the following social platform:
LinkedIn: http://www.linkedin.com/in/matthew-krebs
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each...2021-04-221h 19The CAD Manager Confessions PodcastE27: BIM Management Masterclass Series #1 - Todd RogersYou’re listening to the CAD Manager Confessions Podcast, Episode 27
In this episode, I'll be sharing an interview I did with Todd Rogers as part of Series #1 of my BIM Management Masterclass where I interview some of the best BIM Managers across different industries.
Todd can be found on the following social platforms:
Website: https://civil3dj.wordpress.com/
LinkedIn: https://www.linkedin.com/in/todd-rogers-2233b760/
Twitter: https://twitter.com/Civil_3DJ
Hi! I’m your host Eric DeLeon and this...2021-04-2248 minThe CAD Manager Confessions PodcastE26: BIM Management Masterclass Series #1 - Justin EhartYou’re listening to the CAD Manager Confessions Podcast, Episode 26
In this episode, I'll be sharing an interview I did with Justin Ehart as part of Series #1 of my BIM Management Masterclass where I interview some of the best BIM Managers across different industries.
Justin can be found on the following social platform:
LinkedIn: http://linkedin.com/in/andthisjustin
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week...2021-04-2257 minThe CAD Manager Confessions PodcastE25: BIM Management Masterclass Series #1 - Darren YoungYou’re listening to the CAD Manager Confessions Podcast, Episode 25
In this episode, I'll be sharing an interview I did with Darren Young as part of Series #1 of my BIM Management Masterclass where I interview some of the best BIM Managers across different industries.
Darren can be found on the following social platforms:
Website: https://www.darrenjyoung.com/
LinkedIn: https://www.linkedin.com/in/darrenjyoung/
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the...2021-04-221h 10The CAD Manager Confessions PodcastE24: BIM Management Masterclass Series #1 - Jason PetersYou’re listening to the CAD Manager Confessions Podcast, Episode 24
In this episode, I'll be sharing an interview I did with Jason Peters as part of Series #1 of my BIM Management Masterclass where I interview some of the best BIM Managers across different industries.
Jason can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/jason-peters-1b2a74188/
Twitter: https://twitter.com/JP_WPGCADGUY
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the...2021-04-221h 13
Straight Up Chicago InvestorCHA Section 8 Roundtable - Part 1Many fear what they don’t understand. That’s exactly why we put together this round table discussion with two other great CHA section 8 property managers. Listen in as we address the entire workflow from screening the applicants, to the move in, and everything that happens in between. Section 8 can be a great investment strategy, but it’s imperative you understand how it works...ESPECIALLY in a city like Chicago. If you learned something today, please leave us a review and share us with a friend. Enjoy the episode! Connect with Mark and Tom: StraightUpChicagoInvestor.com Emai...2021-03-2559 minThe CAD Manager Confessions PodcastE23: CAD Management Masterclass Series #3 - Robert Green InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 23
In this episode, I'll be sharing an interview I did with Robert Green aka The Godfather of CAD Management as part of Series #3 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Robert can be found on the following social platforms:
Website: https://greenconsulting.com/
LinkedIn: https://www.linkedin.com/in/rgcadman/
Twitter: https://twitter.com/RGCADMan
Hi! I’m your host Eric DeLe...2020-12-211h 01The CAD Manager Confessions PodcastE22: CAD Management Masterclass Series #3 - Curt Moreno InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 22
In this episode, I'll be sharing an interview I did with Curt Moreno aka Kung Fu Manager as part of Series #3 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Curt can be found on the following social platforms:
Website: https://www.kungfumanager.com/
LinkedIn: https://www.linkedin.com/in/curtmoreno/
Twitter: https://twitter.com/wkfd
Hi! I’m your host Eric DeLeon and this podcast is f...2020-12-211h 40The CAD Manager Confessions PodcastE21: CAD Management Masterclass Series #3 - Shaun Bryant InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 21
In this episode, I'll be sharing an interview I did with Shaun Bryant as part of Series #3 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Shaun can be found on the following social platforms:
Website: https://cadfmconsult.com/
LinkedIn: https://www.linkedin.com/in/cadfmconsult/
Twitter: https://twitter.com/notjustcad
Instagram: https://www.instagram.com/notjustcad/
Youtube: https://www.youtube.com/channel/UCrYs1iV...2020-12-211h 16The CAD Manager Confessions PodcastE20: CAD Management Masterclass Series #3 - Stacey Morykin InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 20
In this episode, I'll be sharing an interview I did with Stacey Morykin as part of Series #3 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Stacey can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/stacey-morykin-52b5b721/
Twitter: https://twitter.com/StaceyMorykin
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their purs...2020-12-2159 minThe CAD Manager Confessions PodcastE19: CAD Management Masterclass Series #3 - Chris Lindner InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 19
In this episode, I'll be sharing an interview I did with Chris Lindner as part of Series #3 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Chris can be found on the following social platforms:
Website: www.onebuttoncad.com
LinkedIn: https://www.linkedin.com/in/chrislindner2/
Twitter: https://twitter.com/chrislindner
Instagram: https://www.instagram.com/chris_lindner/
Hi! I’m your...2020-12-211h 17The CAD Manager Confessions PodcastE18: CAD Management Masterclass Series #2 - Rick Ellis InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 18
In this episode, I'll be sharing an interview I did with Rick Ellis as part of Series #2 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Rick can be found on the following social platforms:
Website: https://cadapult-software.com/
LinkedIn: https://www.linkedin.com/in/ellisrick/
Twitter: https://twitter.com/theRickEllis
Hi! I’m your host Eric DeLeon and this podcast is for CAD...2020-12-211h 21The CAD Manager Confessions PodcastE17: CAD Management Masterclass Series #2 - Chris Mancilla InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 17
In this episode, I'll be sharing an interview I did with Chris Mancilla as part of Series #2 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Chris can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/chris-mancilla-049494113/
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be...2020-12-2134 minThe CAD Manager Confessions PodcastE16: CAD Management Masterclass Series #2 - Danielle Civitillo InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 16
In this episode, I'll be sharing an interview I did with Danielle Civitillo as part of Series #2 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Danielle can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/dcivitillo/
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each...2020-12-2154 minThe CAD Manager Confessions PodcastE15: CAD Management Masterclass Series #2 - Donnie Gladfelter InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 15
In this episode, I'll be sharing an interview I did with Donnie Gladfelter as part of Series #2 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Donnie can be found on the following social platforms:
Website: https://thecadgeek.com/
Linkedin: https://www.linkedin.com/in/dgladfelter/
Twitter: https://twitter.com/thecadgeek
Instagram: https://www.instagram.com/thecadgeek/
Hi! I’m your host...2020-12-211h 09The CAD Manager Confessions PodcastE14: CAD Management Masterclass Series #2 - Sam Lucido InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 14
In this episode, I'll be sharing an interview I did with Sam Lucido as part of Series #2 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Sam can be found on the following social platforms:
Website: https://cadprotips.com/
LinkedIn: https://www.linkedin.com/in/sam-lucido-cadprotips/
Twitter: https://twitter.com/CADproTips
Instagram: https://www.instagram.com/cadprotips/
Hi! I’m your host...2020-12-211h 13
Brewing with BIMBWB Episode 37 - CAD Manager Confessions with Eric DeLeonHey BWB Fans,
We are back with our long time friend and podcast mentor, Eric DeLeon. Eric is the soothing voice behind The CAD Manager Confessions. When he isn't preaching about CAD management he is practicing it in his daily profession. Eric is a technology enthusiast and an early adapter of LiDAR for civil and construction purposes. In this episode we drink, we talk like old friends, discuss impacts of COVID, the future of CIM, and so much more.2020-09-211h 14The CAD Manager Confessions PodcastE13: CAD Management Masterclass Series 1 - Craig Swearingen InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 13.
In this episode, I'll be sharing an interview I did with Craig Swearingen as part of Series #1 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Craig Swearingen can be found on the following social platforms:
Twitter: https://twitter.com/craigswearingen
LinkedIn: https://www.linkedin.com/in/craig-swearingen-3073b295/
#cadmanagerneversleeps
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their purs...2020-09-021h 12The CAD Manager Confessions PodcastE12: CAD Management Masterclass Series 1 - David Park InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 12.
In this episode, I'll be sharing an interview I did with David Park as part of Series #1 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
David Park can be found on the following social platforms:
LinkedIn: https://www.linkedin.com/in/dapark7/
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’l...2020-09-0149 minThe CAD Manager Confessions PodcastE11: CAD Management Masterclass Series 1 - Frank Mayfield InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 11.
In this episode, I'll be sharing an interview I did with Frank Mayfield as part of Series #1 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Frank Mayfield can be found on the following social platforms:
Twitter: @Themadcadr
LinkedIn: https://www.linkedin.com/in/franklmayfield/
AutoCAD Blog: https://blogs.autodesk.com/autocad/author/frankmayfield/
Autodesk University:
https://www.autodesk.com/autodesk-university/au-online/profile?code=s8aI33EoFJoqlZYMlYcb%2Fw...2020-09-0153 minThe CAD Manager Confessions PodcastE10: CAD Management Masterclass Series 1 - Mark Behrens InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 10.
In this episode, I'll be sharing an interview I did with Mark Behrens as part of Series #1 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Mark Behrens can be found on the following social platforms:
Twitter: https://twitter.com/cadman_99
LinkedIn: https://www.linkedin.com/in/mark-behrens-00730b2b/
Website: https://autodeskadvocates.influitive.com/profiles/94c53ad9-ca8d-4a06-aff5-7499d6fe5b03
Website: https://forums.au...2020-09-0158 minThe CAD Manager Confessions PodcastE09: CAD Management Masterclass Series 1 - Tom Richardson InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 09.
In this episode, I'll be sharing an interview I did with Tom Richardson as part of Series #1 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Tom Richardson can be found on the following social platforms:
Twitter: https://twitter.com/C3D_TomR
LinkedIn: https://www.linkedin.com/in/tomrichardson3/
Discord: https://discordapp.com/channels/539825204709294080/540182258649137167/540182514241765378
Company Website: https://www.mwmdesigngroup.com/
Want to know more about the Ex...2020-09-0143 minThe CAD Manager Confessions PodcastE08: CAD Management Masterclass Series 1 - Jisell Howe InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 08.
In this episode, I'll be sharing an interview I did with Jisell Howe as part of Series #1 of my CAD Management Masterclass where I interview some of the best CAD Managers across different industries.
Jisell Howe can be found on the following social platforms:
Website: https://jisellhowe.com/
Website: https://jisellhowe.com/things-i-love/
LinkedIn: https://www.linkedin.com/in/jisellhowe/
Twitter: https://twitter.com/ji5ell
Hi! I’m your host Eric DeLe...2020-09-0158 minThe CAD Manager Confessions PodcastE07: We Make Civil Engineering Look Good Podcast InterviewYou’re listening to the CAD Manager Confessions Podcast, Episode 07.
In this episode, I'll be sharing an interview I did with my good friend Sam Lytle the host of the We Make Civil Engineering Look Good and Beyond CAD Podcasts, and the Founder of Civil FX a 3D Visualization firm based out of Nevada.
You can listen to his Podcasts here:
We Make Civil Engineering Look Good:
https://podcasts.apple.com/us/podcast/we-make-civil-engineering-look-good-working-to-make/id1501242108
Beyond CAD:
https://podcasts.apple.com/us/podcast/beyond-cad-by-civil-fx-bim-3d-visualization-uavs-aerial/id868558047
...2020-06-1343 min
We Make Civil Engineering Look Good | Working to Make Transportation and other Civil Engineer Projects Better through Outreach, 3D Visualization and More!Where CAD Should Be Going with the CAD Manager Himself, Eric DeLeonView and Subscribe on YouTube: https://youtu.be/sPMF40RTNGY In this episode, Sam talks with Eric DeLeon who has been drafting and managing CAD for many years and now has a podcast of his own- the CAD Manager Confessions Eric talks of his path into the AEC (Architecture, Engineering and Construction) industry and how he uses both Microstation (Bentley) and Civil 3D (AutoCAD) products to serve a variety of clients. He also discusses his efforts into 3D visualization using a variety of tools. Sam and Eric then discuss where CAD could be...2020-06-0943 min
Sam Lytle Podcast- Adventures in Business, Design and Life103 | CAD and Beyond with Eric DeLeon of CAD Manager ConfessionsIn this episode of Beyond CAD, Eric DeLeon talks with me about how he got into the world of AEC, his preference between AutoDesk and Bentley and many other topics. Make sure to check out Eric's podcast! https://podcasts.apple.com/us/podcast/the-cad-manager-confessions-podcast/id1482553737 2020-06-0442 minThe CAD Manager Confessions PodcastE06: Tactics to help improve the quality of your plans (Part 2)You’re listening to the CAD Manager Confessions Podcast, Episode 06.
In this episode, we'll be continuing our discussion on the tactics to help improve the quality of your plans.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with daily as they manage and mentor their CAD team, build and enforce standards, develop best practices, and provide leadership and vision to the firm in the implementation of new...2020-05-2015 minThe CAD Manager Confessions PodcastE05: Tactics to help improve the quality of your plansYou’re listening to the CAD Manager Confessions Podcast, Episode 05.
In this episode, I'll be talking about the tactics to help improve the quality of your plans.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with every day as they manage and mentor their CAD team, build and enforce standards, develop best practices, and provide leadership and vision to the firm in the implementation of new te...2020-01-2513 minThe CAD Manager Confessions PodcastE04: Rant - Getting back to drafting basicsYou’re listening to the CAD Manager Confessions Podcast, Episode 04.
Today I’ll be going on a little rant on getting back to drafting basics - drawing to scale.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with every day as they manage and mentor their CAD team, build and enforce standards, develop best practices, and provide leadership and vision to the firm in...2020-01-1113 minThe CAD Manager Confessions PodcastE03: Autodesk University Day #1 RecapIn this episode, I'll be giving my Day #1 Recap from Autodesk University.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with every day as they manage and mentor their CAD team, build and enforce standards, develop best practices, and provide leadership and vision to the firm in the implementation of new technologies.
With an extensive career as a CAD Manager, I’m here to confession all my...2019-11-2020 min
Our Passion is Music & Friends OfficialSerjey Andre Kul: My Passion is Trance 206 (Full on Trance Special)01. Markus Schulz Feat. Justine Suissa - Perception (Johan Gielen Extended Remix)
02. Luke Terry - Skynet (Original Mix)
03. Duncan Newell - Falling Away from Me (Extended Mix)
04. Key Lean - Jarre (Extended Mix)
05. Adam Ellis, Ellie Lawson - An Ember in the Ashes (John Askew Extended Remix)
06. Indecent Noise - Contact (Original Mix)
07. Paffendorf - Where Are You (Lightcontrol Extended Remix)
08. Yuki Higashi - Auron (Extended Mix)
09. Mark Sherry & David Forbes - Yerba Del Diablo (Extended Mix)
10. John Askew, UDM - Manchester (Extended Mix)
11. Talla 2xlc - Sensei (Original Mix)2019-11-152h 01The CAD Manager Confessions PodcastE02: Can you handle the TRUTH?In this episode, I'll be talking about the CAD Truths that I've developed over my career that help me in my pursuit for the perfect set of plans.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with every day as they manage and mentor their CAD team, build and enforce standards, develop best practices, and provide leadership and vision to the firm...2019-11-0912 minThe CAD Manager Confessions PodcastE01: Taking charge of your careerYou’re listening to the CAD Manager Confessions Podcast, Episode 01.
Today we’re going to be talking about TAKING CHARGE OF YOUR CAREER, so stay tuned.
Hi! I’m your host Eric DeLeon and this podcast is for CAD Managers in their pursuit for the perfect set of plans.
Each week, we’ll be doing deep dives into what CAD Managers deal with every day as they manage and mentor their CAD team, build and enforce standards, develop best practices, and provide leadership and vision to the firm in the implemen...2019-10-1808 minThe CAD Manager Confessions PodcastTrailer: Intro & Origin StoryIn this trailer episode, I’ll be giving a little background of why I started this podcast.
Want to talk CAD Management and/or Project Delivery in between episodes?
Follow me on LinkedIn at LinkedIn.com/in/EricDeleon, so we connect and chat.
I’m also the founder of the CAD Managers Mastermind Group on LinkedIn. It’s a group created for CAD Managers by CAD Managers. This is an exclusive group so search for CAD Managers Mastermind within LinkedIn Groups and I’ll be waiting to accept your join group request.2019-10-0512 min
ExoSquad GoalsS1 EP 8: We Need to Talk about DeLeon
The George Romero/Exosquad project is off to a weird start...
After hitching a one way ticket to the sun, the Exo-Gang takes a detour to Venus. Ever want an Exosquad/American Chopper mashup? DeLeon's got you covered! In this episode we discuss 90s sitcoms, haunting cartoon moments, Tom Hanks, and what is up with Alec DeLeon.Also: If you have a question you want answered, reach out to us @exosquadgoals and we will answer it on our End of Season 1 recap!Music Credits:Intro/Outro: Eric Calderone2017-03-1840 min
ExoSquad GoalsS1 EP 8: We Need to Talk about DeLeonAfter hitching a one way ticket to the sun, the Exo-Gang takes a detour to Venus. Ever want an Exosquad/American Chopper mashup? DeLeon's got you covered! In this episode we discuss 90s sitcoms, haunting cartoon moments, Tom Hanks, and what is up with Alec DeLeon. Also: If you have a question you want answered, reach out to us @exosquadgoals and we will answer it on our End of Season 1 recap! Music Credits: Intro/Outro: Eric Calderone2017-03-1840 min
Fitness Candor Podcast034 - Chris DeLeon: Athletic to Obese and Back, Motivating Yourself & OthersThrowback Thursday!
Original air date: 02/2017
Chris DeLeon shares his journey from being obese to stepping on stage as a men's physique competitor. From there he continued to share his passion helping others in the military. Chris also discusses how he motivates his current clients and gives a little insight into physique training.
http://thecrite.com/coloradomesau/trainer-talk-lift-weight-lose-weight/
Please visit http://bit.ly/fitnesscandorpodcast, click View in iTunes, go to Ratings and Reviews at the top and leave a rating and/or review! That would be helpful for both of us a...2017-02-1038 min
Eric L. SpencerThe Deleon Brothers BandI produced this promotional marketing video for DeLeon Brothers Productions and the DeLeon Brothers Band. The DeLeon Brothers are on a mission to share the Legacy CD with the Denver community and the world. You purchase the CD at WWW.DELEONBROTHERS.COM2014-09-1902 min
On the Record...OnlineOvercoming Digital Illiteracy at Work
Despite the wide spread adoption of social media on a global basis, most companies today remain clueless about how digital technology is changing the way people communicate and share information.
How else do explain Burson-Marsteller's email smear campaign against Google for Facebook, a famous British soccer player's lawsuit against Twitter to unmask his anonymous critics, or JC Penny and Overstock.com's decision to employ black hat SEO tactics, resulting in their websites being manually demoted in the search rankings.
Chalk it up to digital illiteracy.
In this episode, PR professionals from Martin Waymire Ad...2011-06-0200 minEric SchwartzmanOvercoming Digital Illiteracy at WorkDespite the wide spread adoption of social media on a global basis, most companies today remain clueless about how digital technology is changing the way people communicate and share information.
How else do explain Burson-Marsteller's email smear campaign against Google for Facebook, a famous British soccer player's lawsuit against Twitter to unmask his anonymous critics, or JC Penny and Overstock.com's decision to employ black hat SEO tactics, resulting in their websites being manually demoted in the search rankings.
Chalk it up to digital illiteracy.
In this episode, PR professionals from Martin Waymire Advocacy Communications in Central Michigan discuss overcoming dig...2011-06-0200 min