Shows
Serebro en Los DeportesANTHONY JOSHUA QUIEBRA LA MANDIBULA DE JAKE PAUL, PERO NO SU NEGOCIOJoshua no consiguió el nocaut temprano que prometió, pero sí lo más importante: imponer jerarquía.
Castigó al cuerpo, tuvo paciencia y cerró la noche con una derecha demoledora.
No fue brillante, pero fue suficiente para volver a ponerse en la conversación grande del peso pesado.
Anthony Joshua noqueó a Jake Paul, pero el resultado va más allá del nocaut. En este análisis te explico por qué ambos ganaron algo: Joshua avanza hacia una posible pelea con Tyson Fury, mientras Jake Paul confirma que su modelo de espectáculo en el boxeo sigue funcionando. ¿Quién salió mejor para...
2025-12-241h 02
Fully Threaded RadioSpecial Report: Tough Nutter '25 RecapTough Nutters George "GHIII" Hunt of Brighton Best, Bobby "Tater Tot" Wegner of Beacon Fasteners, Bob "GQ" Baer from Abbott-Interfast, and BTM Manufacturing president Jake "Valdez" Davis put on their jerseys to relive highlights of the dirtiest fastener networking event of 2025. Run time: 47:05
2025-10-0147 min
Fully Threaded RadioSpecial Report: Tough Nutter '25 RecapTough Nutters George “GHIII” Hunt of Brighton Best, Bobby “Tater Tot” Wegner of Beacon Fasteners, Bob “GQ” Baer from Abbott-Interfast, and BTM Manufacturing president Jake “Valdez” Davis put on their jerseys to relive highlights of the dirtiest fastener networking event of 2025. Run time: 47:07
2025-10-0147 minFully Threaded RadioSpecial Report: The Mud RacersMWFA FSTNR Week '25 is right around the corner, that means it's time to start prepping for fastener mud racing! Team leaders Bob "GQ" Baer of Abbott-Interfast, Jake "Valdez" Davis of BTM Manufacturing and Bobby "Tater Tot" Wegner of Beacon Fasteners set the stage for another memorable year. Once again, they hope to avoid electrocution, dehydration, excessive grass stains, and of course, hydrogen embrittlement, and they want you to join the team today! Run time: 25:06
2025-07-0625 min
Fully Threaded RadioSpecial Report: The Mud RacersMWFA FSTNR Week ’25 is right around the corner, that means it’s time to start prepping for fastener mud racing! Team leaders Bob “GQ” Baer of Abbott-Interfast, Jake “Valdez” Davis of BTM Manufacturing and Bobby “Tater Tot” Wegner of Beacon Fasteners set the stage for another memorable year. Once again, they hope to avoid electrocution, dehydration, excessive grass stains, and of course, hydrogen embrittlement, and they want you to join the team today! Run time: 25:06
2025-07-0625 min
Zoom SportsJake Paul vs Chávez Jr... ¿nos están viendo la cara? 👀En el episodio de hoy de Zoom Sports analizamos de principio a fin la polémica cartelera encabezada por Jake Paul vs Julio César Chávez Jr., un combate que ha dividido opiniones y genera más dudas que certezas.También comentamos el inicio de la gira promocional de Canelo Álvarez vs Terence Crawford, marcada por una estrategia inusual: ambos rivales compartiendo cena con el promotor Turki Alalshikh. ¿Qué buscan con este tono tan amistoso?Y hablamos de la gran sorpresa que dio El Chihuas Rodríguez en el Reino Unido, venciendo...
2025-06-2637 min
Primero y DiezFANTASY - Top 24 wide receivers 2025
Prepárate para tu draft de Fantasy Football 2025 con unos rankings tempraneros y polémico de TEs. En este episodio, analizamos a los 12 mejores tight ends para tu equipo de fantasy, desde los jóvenes construyendo el futuro como Brock Bowers y Trey McBride, hasta los "viejitos" George Kittle, Mark Andrews y Travis Kelce. ¿Vale la pena tomar un tight end temprano o es mejor esperar? ¿Todavía vamos a emocionarnos con Taysom Hill? Todo eso y más, con Chato Romero y Ulises Harada.
Además, te damos un adelanto de lo que se viene en nuestra comunidad de Disco...
2025-06-1927 min
Primero y DiezFANTASY - Top 12 tight ends 2025
Prepárate para tu draft de Fantasy Football 2025 con unos rankings tempraneros y polémico de TEs. En este episodio, analizamos a los 12 mejores tight ends para tu equipo de fantasy, desde los jóvenes construyendo el futuro como Brock Bowers y Trey McBride, hasta los "viejitos" George Kittle, Mark Andrews y Travis Kelce. ¿Vale la pena tomar un tight end temprano o es mejor esperar? ¿Todavía vamos a emocionarnos con Taysom Hill? Todo eso y más, con Chato Romero y Ulises Harada.
Además, te damos un adelanto de lo que se viene en nuestra comunidad de Disco...
2025-06-1512 min
Fully Threaded RadioSpecial Report: Pac-West Spring Conference '25Pac-West Fastener Association spring conference floor interviews and coverage, including Paul Vittori, George Martinez, Darlene Collis, Carl Spackman, Michael Chen, Jake “Valdez” Davis, Christian Reich and Steve “The Sasco Man” Dunham. PLUS: Golf tourney winners. Run time: 27:42
2025-03-2127 minFully Threaded RadioSpecial Report: Pac-West Spring Conference '25Pac-West Fastener Association spring conference floor interviews and coverage, including Paul Vittori, George Martinez, Darlene Collis, Carl Spackman, Michael Chen, Jake "Valdez" Davis, Christian Reich and Steve "The Sasco Man" Dunham. PLUS: Golf tourney winners. Run time: 27:42
2025-03-2127 min
Play Ball MarlinsEvaluando la temporada baja de los Marlins: Aciertos y dudasPlay Ball Marlins inicia su segunda temporada con un análisis profundo de los movimientos de los Miami Marlins durante la temporada baja. Alfre Álvarez, Yordano Carmona y Kevin Barral discuten los intercambios más relevantes, incluyendo el retorno obtenido por Jake Burger y si era necesario desprenderse de él. También exploran los prospectos que llegaron a cambio de Jesús Luzardo y evalúan si Matt Mervis podría desempeñar un papel protagónico en el equipo para 2025. Un episodio imperdible para los fanáticos interesados en el futuro de los Marlins.Conviértete en un seguidor...
2025-01-0645 min
Fully Threaded RadioEpisode #206A - Out Of The RutFastener industry optimism keeps the latest FDI numbers strong as AFC VP of sales John Kovatch joins Mike McNulty on the Fastener News Report (19:55). There's more good news for fastener mud racers as Jake "Valdez" Davis of BTM Manufacturing announces dates for next year's huge MWFA event (7:15). PLUS: Brian and Eric launch the new IronClad gloves "Out of the Rut" contest. Run time: 53:30
2024-11-2052 minFully Threaded RadioEpisode #206A - Out of the RutFastener industry optimism keeps the latest FDI numbers strong as AFC VP of sales John Kovatch joins Mike McNulty on the Fastener News Report (19:55). There's more good news for fastener mud racers as Jake "Valdez" Davis of BTM Manufacturing announces dates for next year's huge MWFA event (7:15). PLUS: Brian and Eric launch the new IronClad gloves "Out of the Rut" contest. Run time: 53:30
2024-11-2052 minFully Threaded RadioEpisode #204 - Wall to WallDon "The Amazing" Shan joins Brian and Eric for semi-comprehensive IFE '24 coverage, featuring Larry Stevens, Jo Morris, Marcel Goebel, Wayne Wishnew, Lisa Sanderson, Jake Glaser, John Gaudette, Mike Robinson and many more! An important name was added to the wall this year, and the lovely and talented Lynn Dempsey was there. Plus, Earnest CEO Kirk Zehnder joins industry newsman Mike McNulty to dissect the stunning FDI report on the Fastener News Report (1:09:55). Newly inducted Fastener Hall of Famer Carmen Vertullo gazes into the future of fastener materials on the latest Fastener Training Minute (1:37:18). Run time: 02:42:22
2024-09-202h 42Fully Threaded RadioEpisode #204 - Wall to WallDon "The Amazing" Shan joins Brian and Eric for semi-comprehensive IFE '24 coverage, featuring Larry Stevens, Jo Morris, Marcel Goebel, Wayne Wishnew, Lisa Sanderson, Jake Glaser, John Gaudette, Mike Robinson and many more! An important name was added to the wall this year, and the lovely and talented Lynn Dempsey was there. Plus, Earnest CEO Kirk Zehnder joins industry newsman Mike McNulty to dissect the stunning FDI report on the Fastener News Report (1:09:55). Newly inducted Fastener Hall of Famer Carmen Vertullo gazes into the future of fastener materials on the latest Fa...
2024-09-202h 42Fully Threaded RadioSpecial Report: Chiricosta Wins Form Fit & Function Award / FSTNR Week '24Fastener Fair USA show manager and fastener friend Mr. Bob Chiricosta of RX Expositions is the winner of this year's Form, Fit & Function Award, presented by the Naperville Fastener Association (the most non-exclusive of all the fastener associations). PLUS: Bob "GQ" Baer and Jake "Valdez" Davis preview this year's FSTNR Week '24. Run time: 24:21
2024-08-0524 minFully Threaded RadioSpecial Report: Chiricosta Wins Form Fit & Function Award / FSTNR Week '24Fastener Fair USA show manager and fastener friend Mr. Bob Chiricosta of RX Expositions is the winner of this year's Form, Fit & Function Award, presented by the Naperville Fastener Association (the most non-exclusive of all the fastener associations). PLUS: Bob "GQ" Baer and Jake "Valdez" Davis preview this year's FSTNR Week '24. Run time: 24:21
2024-08-0524 minFully Threaded RadioEpisode #201 - Harpo's RevengeIt's more fastener industry squawking as 30 year veteran Al Bate of All America Threaded Products flies in to discuss European distribution models, fastener head hunting and an exciting new threaded rod offering (1:37:49). Reporting from a high speed rail car, YFP star Parker Jensen of Atlas Distribution reports on the recent Taiwan International Fastener Show (21:49). AFC Industries VP of sales John Kovatch sits in with newsman Mike McNulty on the Fastener News Report to unpack the startling FDI reading for May (1:00:11). Jake "Valdez" Davis and Francesca Lewis of the MWFA preview this year's FSTNR Week (39:43). On the Fastener Training Minute, C...
2024-06-202h 28Fully Threaded RadioEpisode #201 - Harpo's RevengeIt's more fastener industry squawking as 30 year veteran Al Bate of All America Threaded Products flies in to discuss European distribution models, fastener head hunting and an exciting new threaded rod offering (1:37:49). Reporting from a high speed rail car, YFP star Parker Jensen of Atlas Distribution reports on the recent Taiwan International Fastener Show (21:49). AFC Industries VP of sales John Kovatch sits in with newsman Mike McNulty on the Fastener News Report to unpack the startling FDI reading for May (1:00:11). Jake "Valdez" Davis and Francesca Lewis of t...
2024-06-202h 28Fully Threaded RadioSpecial Report: Fastener Fair '24The biggest fastener industry event of the spring, Fastener Fair USA '24 rocked Cleveland, was a huge success and a boatload of fun! The lovely and talented Lynn Dempsey hit the show floor with her mic in hand: Jason Baines, Lee Parker, Bob Chiricosta, Mallory Nichols, John "Cool Hand" Butler, Hans Fuller, Lonni Kieffer, Boris Elbaum, Marty Nolan, Kevin Chavis, Henning Cybulski, Jake "Valdez" Davis, Dustin Henderson and many more! Run time: 53:27
2024-05-3153 minFully Threaded RadioSpecial Report: Fastener Fair '24The biggest fastener industry event of the spring, Fastener Fair USA '24 rocked Cleveland, was a huge success and a boatload of fun! The lovely and talented Lynn Dempsey hit the show floor with her mic in hand: Jason Baines, Lee Parker, Bob Chiricosta, Mallory Nichols, John "Cool Hand" Butler, Hans Fuller, Lonni Kieffer, Boris Elbaum, Marty Nolan, Kevin Chavis, Henning Cybulski, Jake "Valdez" Davis, Dustin Henderson and many more! Run time: 53:27
2024-05-3153 min
Los Tres AmigosCríticas en Caliente - ROAD HOUSE. DE PROFESIÓN: DUROIván ya ha podido ver el remake de #RoadHouse en #PrimeVideo y nos trae sus primeras impresiones.
¿Es Jake Gyllenhaal un buen sustituto de Patrick Swayze? ¿Tenemos a un Doug Liman en forma detrás de las cámaras? Para resolver éstas y más dudas, ya sabéis lo que tenéis que hacer.
"Road House. De profesión: Duro" está disponible en Prime Video.
También nos podéis encontrar aquí:
Spotify: https://open.spotify.com/show/52i1iqZ56ACal18GPkCxiW
Apple Podcasts: https://podcasts.apple.com/es/podcast/los-tres-amigos/id1198252523
Youtube: https://www.youtube.com/channel/UC3zK2XsnpHDGR...
2024-03-2504 minFully Threaded RadioSpecial Report: Mud Race Cancelled?Elite fastener mud racers Bob "GQ" Baer, Jake "Valdez" Davis, and GH3 break a shocking development pertaining to the 2024 Rugged Nut event scheduled ahead of this year's MWFA FSTNR week. How will this news impact the growing tradition, and what does it mean for the future of fastener mud racing? Run time: 16:33
2024-03-0416 minFully Threaded RadioSpecial Report: Mud Race Cancelled?Elite fastener mud racers Bob "GQ" Baer, Jake "Valdez" Davis, and GH3 break a shocking development pertaining to the 2024 Rugged Nut event scheduled ahead of this year's MWFA FSTNR week. How will this news impact the growing tradition, and what does it mean for the future of fastener mud racing? Run time: 16:33
2024-03-0416 min
Power-Up With An Ground-Breaking Full Audiobook And Elevate Your Mindset.[Spanish] - La condesa maldita by Reyes MonfortePlease visithttps://thebookvoice.com/podcasts/1/audiobook/755922to listen full audiobooks.
Title: [Spanish] - La condesa maldita
Author: Reyes Monforte
Narrator: Beatriz Melgares, Reyes Monforte
Format: Unabridged Audiobook
Length: 28 hours 45 minutes
Release date: February 22, 2024
Genres: Historical
Publisher's Summary:
Una emocionante historia de intriga, pasión y crimen protagonizada por la condesa Maria Tarnowska, la mujer que conmocionó al mundo en la Venecia de la belle époque. Septiembre, 1907. Movido por los celos, el joven traductor ruso Nikolái Naumov dispara contra el conde Kamarowski en su palacio de Venecia al saber que contraerá matrimonio con la mujer que ama en secreto. Cuando el co...
2024-02-224h 45Fully Threaded RadioEpisode #196 - Clean UpThe new year begins with high flying headlines as Würth Industries all-star Mr. Dee Ward receives big news that has him taking to the skies (19:14). Fastener forecasters Jo Morris of the Fastener Training Institute and Jake "Valdez" Davis, CFS of BTM Manufacturing discuss their recent training week experience in lieu of actually prognosticating on the coming year (1:33:56). On the Fastener News Report, Abbott-Interfast president Bob "GQ" Baer joins news editor Mike McNulty with complete FDI data for last year along with a look ahead (53:26). Industry guru Carmen Vertul...
2024-01-182h 30Fully Threaded RadioEpisode #196 - Clean UpThe new year begins with high flying headlines as Würth Industries all-star Mr. Dee Ward receives big news that has him taking to the skies (19:14). Fastener forecasters Jo Morris of the Fastener Training Institute and Jake "Valdez" Davis, CFS of BTM Manufacturing discuss their recent training week experience in lieu of actually prognosticating on the coming year (1:33:56). On the Fastener News Report, Abbott-Interfast president Bob "GQ" Baer joins news editor Mike McNulty with complete FDI data for last year along with a look ahead (53:26). Industry guru Carmen Vertullo presents the Fastener Training Minute, this time discussing the risky busine...
2024-01-182h 30
Ida y VueltaIda y Vuelta: 30 de noviembre de 2023Este programa está cargado en columnas. Luis Alejo nos habla de como se vive la identidad deportiva del estadounidense con su alma mater; regresó CM Punk a WWE y también volvió el Blog de Tommy; luego de una aburrida temporada, Max Verstappen se lleva otro título de F1; la selección femenina de fútbol empató ante su similar de Jamaica y está a nada de clasificar a la Copa Oro femenina, pero deja muchas dudas.
2023-11-3057 minFully Threaded RadioSpecial Report: MWFA FSTNR Week '23MWFA FSTNR Week highlights and floor interviews including Christian Reich, Don "The Amazing" Shan, Nick Penney, Ashely Parker, Jeremy Gethmann, Andres Green, Nancy Rich, Jake "Valdez" Davis and more. Golf results and FTR award update. PLUS: The promised AI for Distribution Conference promo code, and is it really time to say goodbye? Run time: 40:03
2023-09-0940 minFully Threaded RadioSpecial Report: MWFA FSTNR Week '23MWFA FSTNR Week highlights and floor interviews including Christian Reich, Don "The Amazing" Shan, Nick Penney, Ashely Parker, Jeremy Gethmann, Andres Green, Nancy Rich, Jake "Valdez" Davis and more. Golf results and FTR award update. PLUS: The promised AI for Distribution Conference promo code, and is it really time to say goodbye? Run time: 40:03
2023-09-0940 minFully Threaded RadioEpisode #189 - CrossroadsThe world approaches a precarious intersection with the advent of super AI. AFC Industries CEO Kevin Godin shares his thoughts and describes how new tech tools are already in use in the fastener industry (1:26:19). BTM Manufacturing president Jake "Valdez" Davis and Elios Coffee proprietor Dan Smith explain the mission of U-Bolt Blend coffee (16:42). Star Stainless president Tim Roberto Jr. joins newsman Mike McNulty on the Fastener News Report (50:47). Fastener Professional of the Year Carmen Vertullo knows how to reverse hydrogen embrittlement. Find out when it make...
2023-06-222h 05Fully Threaded RadioEpisode #189 - CrossroadsThe world approaches a precarious intersection with the advent of super AI. AFC Industries CEO Kevin Godin shares his thoughts and describes how new tech tools are already in use in the fastener industry (1:26:19). BTM Manufacturing president Jake "Valdez" Davis and Elios Coffee proprietor Dan Smith explain the mission of U-Bolt Blend coffee (16:42). Star Stainless president Tim Roberto Jr. joins newsman Mike McNulty on the Fastener News Report (50:47). Fastener Professional of the Year Carmen Vertullo knows how to reverse hydrogen embrittlement. Find out when it makes sense on the Fastener Training Minute (1:15:34). BONUS: From the Naperville Fastener Association, GHIII and...
2023-06-222h 05Fully Threaded RadioSpecial Report: Strandquist SellsIndustry veteran Marc Strandquist announces a new mission with Sellside Group, helping fastener companies navigate the challenges of a market in flux. David Kerr of Metal Resource Solutions warns of coming price hikes on European steel. Plus: Jake "Valdez" Davis of BTM Manufacturing is quitting? Run time: 30:47
2022-10-0730 minFully Threaded RadioSpecial Report: Strandquist SellsIndustry veteran Marc Strandquist announces a new mission with Sellside Group, helping fastener companies navigate the challenges of a market in flux. David Kerr of Metal Resource Solutions warns of coming price hikes on European steel. Plus: Jake "Valdez" Davis of BTM Manufacturing is quitting? Run time: 30:47
2022-10-0730 minFully Threaded RadioEpisode #180 - Trainageddon?Has tragedy been narrowly averted or is the supply disruption train still racing down the track, set to impact business across the country? Scanwell Logistics freight forwarding expert Chris Donnell shares his view (16:31). On the other race front, Rugged Maniac team veterans Jake "Valdez" Davis of BTM Manufacturing, Mike Robinson of Star Stainless and Brandi Bertoia of INxSQL Software recount their experience on the mud track, prefaced by Abbott-Interfast president Bob "GQ" Baer (1:38:55). Fastener Technology International editor Mike McNulty welcomes Baird analyst Quinn Fredrickson on...
2022-09-222h 31Fully Threaded RadioEpisode #180 - Trainageddon?Has tragedy been narrowly averted or is the supply disruption train still racing down the track, set to impact business across the country? Scanwell Logistics freight forwarding expert Chris Donnell shares his view (16:31). On the other race front, Rugged Maniac team veterans Jake "Valdez" Davis of BTM Manufacturing, Mike Robinson of Star Stainless and Brandi Bertoia of INxSQL Software recount their experience on the mud track, prefaced by Abbott-Interfast president Bob "GQ" Baer (1:38:55). Fastener Technology International editor Mike McNulty welcomes Baird analyst Quinn Fredrickson on the Fastener News Report to examine the highly unusual FDI results (1:01:15). On the Fastener T...
2022-09-222h 31Fully Threaded RadioSpecial Report: MWFA FSTNR Week '22The Mid-West Fastener Association annual FSTNR Week and table top show, golf tournament and lead up events were wildly successful again this year. TJ McFarland, Don "Tex" Carr, Mike Robinson, Jake "Valdez" Davis, Erica Strandquist, Bob "GQ" Baer, Kam Dorsey, Ashley Parker, Wayne "Captain Smooth" Wishnew and many more! PLUS: Golf highlights including this year's FTR Award winner. Run time: 41:14
2022-09-0741 minFully Threaded RadioSpecial Report: MWFA FSTNR Week '22The Mid-West Fastener Association annual FSTNR Week and table top show, golf tournament and lead up events were wildly successful again this year. TJ McFarland, Don "Tex" Carr, Mike Robinson, Jake "Valdez" Davis, Erica Strandquist, Bob "GQ" Baer, Kam Dorsey, Ashley Parker, Wayne "Captain Smooth" Wishnew and many more! PLUS: Golf highlights including this year's FTR Award winner. Run time: 41:14
2022-09-0741 min
El Podcast Sin RostroEpisodio 63, The Amazing Spider.Man, con Armando Jake.En el 2012 tuvimos el primer remake de la franquicia aracnida, lo que dejo con dudas, a todo el publico, nos emocionó y nos dio esperanza de que veriamos en pantalla grande una trilogia nueva y mejorada de el heroe mas populas del mundo.
Este 2022, se cumplen 10 años de El sorprendente hombre araña, pelicula que nos regaló una nueva y mas moderna visión de el trepa muros.
Aacompañen a este par de clavados a desenredar la telaraña de la speculacion y el festejo de una de las mejores peliculas de Sony.
Recuerden comentar, compartir y disfrutar de este...
2022-08-131h 10
POD OF JAKE#103 - MIKE DUDASMike is a Co-Founder of LinksDAO, an organization using web3 technologies with aspirations of building the world's greatest golf club. He is also the Founder & General Partner at 6th Man Ventures, an early stage crypto VC firm. Mike is an Advisor at Paxos where he serves as Head of Stablecoin Business Development. He previously founded and was CEO of The Block, a crypto informational services business. Before that, Mike was co-founder and CRO of Button and spent time working at Google, Braintree/Venmo, PayPal, and Disney. Follow him on Twitter @mdudas.
[2:18] - How Mike’s experience in tech...
2022-05-1047 minFully Threaded RadioEpisode #171 - Fit FestivitiesThe fastener industry knows how to enjoy its festivities, but also how to open its heart when it counts. Jake "Valdez" Davis of BTM Manufacturing and Matt Boyd of Parker Fasteners explain their plan to make a difference (1:35:03). Desert Distribution managing partner Jo Morris looks back on a memorable year, and looks ahead with new offerings (15:57). Eurolink boss Craig Penland discusses his formula for on-time inbound shipments (43:40). On the Fastener News Report, Mike McNulty makes the case for actual fair trade, and welcomes Baird analyst David Manthey to cover the FDI (54:16). And Carmen Vertullo presents his thoughts on fastener re-us...
2021-12-172h 27Fully Threaded RadioEpisode #171 - Fit FestivitiesThe fastener industry knows how to enjoy its festivities, but also how to open its heart when it counts. Jake "Valdez" Davis of BTM Manufacturing and Matt Boyd of Parker Fasteners explain their plan to make a difference (1:35:03). Desert Distribution managing partner Jo Morris looks back on a memorable year, and looks ahead with new offerings (15:57). Eurolink boss Craig Penland discusses his formula for on-time inbound shipments (43:40). On the Fastener News Report, Mike McNulty makes the case for actual fair trade, and welcomes Baird analyst David Manthey to c...
2021-12-172h 27Fully Threaded RadioEpisode #169 - Printers & SprintersThe fastener world is running at a different pace as supply issues and ongoing consolidation impact the industry. Meanwhile, questionable policy trends add further uncertainty and pressure to the mix. Fortunately, emerging technologies such as additive manufacturing offer hope of new opportunities to forward thinking companies, as Achim Grenner of the Würth Additive Group explains (22:56). Adding their observations to the dialogue, Tough Mudder team mates Jake “Valdez” Davis, John “Cool Hand” Butler, and Jill Lewis react to the changing business environment (1:34:40). On the Fastener News Report, Mike McNulty welcomes AIS president Nick Ruetz to discuss the resilience of the newes...
2021-10-222h 38Fully Threaded RadioEpisode #169 - Printers & SprintersThe fastener world is running at a different pace as supply issues and ongoing consolidation impact the industry. Meanwhile, questionable policy trends add further uncertainty and pressure to the mix. Fortunately, emerging technologies such as additive manufacturing offer hope of new opportunities to forward thinking companies, as Achim Grenner of the Würth Additive Group explains (22:56). Adding their observations to the dialogue, Tough Mudder team mates Jake “Valdez” Davis, John “Cool Hand” Butler, and Jill Lewis react to the changing business environment (1:34:40). On the Fastener News Report, Mike McNulty welcomes...
2021-10-222h 38
Escuchando PeliculasUna pastelería en Notting Hill (2020) #Drama #Amistad #Cocina #peliculas #audesc #podcastPaís
Reino Unido
Dirección
Eliza Schroeder
Guion
Jake Brunger
Música
Enis Rotthoff
Fotografía
Aaron Reid
Reparto
Celia Imrie, Shannon Tarbet, Shelley Conn, Grace Calder, Bill Paterson, Rupert Penry-Jones, Denise Welch, Lucy Fleming, Max Parker, Pano Masti, Phelim Kelly, Maria Alexandrova, Lati Gbaja, ver 4 más
Sinopsis
Decidida a cumplir el sueño de su difunta madre de abrir una pastelería en Notting Hill, la joven Clarissa pide ayuda a la mejor amiga de su madre, Isabella, y a su excéntrica abuela, Mimi. Estas tres generaciones de mujeres necesitarán superar el dolor, las dudas y las dif...
2021-09-211h 33
Ball Street JournalBSJ 61 - Jake Paul lamentable para el Box / Desastre en la Formula 1 / Abraham Ancer no pudo en el Golf / Top 100 jugadores de NFLAnalizamos con el crew de La Formula UNO Podcast todo lo sucedido, y no sucedido, en Bélgica el pasado fin de semana. Checo Pérez volvió a tener problemas, pero en este caso también todos los demás a causa del clima. Jake Paul vuelve a subirse a un ring y sigue generando pena ajena, aunque mucha atención también. Abraham Ancer se quedó corto en el fin de semana en Maryland y no pudo pelear por la victoria. Analizamos la lista de los mejores 100 jugadores de la NFL, según la NFL. Hay muchas dudas al respec
2021-08-3156 minFully Threaded RadioSpecial Report: MWFA 75th and Table TopThe Mid-West Fastener Association table top show, 75th anniversary black tie gala, and annual golf tournament were wildly successful. Kicked off by a pair of unofficial but equally energized events, FSTNR Week '21 was received by an enthusiastic fastener industry, ready to return to face to face events. Nancy Rich, GHIII, Kam Dorsey, Mike Stamm, Rob "Big Country" Reynolds, Bobby Wegner, Heidi Volltrauer, John "Cool Hand" Butler, Christian Reich, Colin Cochart, Jake "Valdez" Davis and many more! PLUS: Tough Mudder, NFA meet-up & golf results. Run time: 42:01
2021-08-2542 minFully Threaded RadioSpecial Report: MWFA 75th and Table TopThe Mid-West Fastener Association table top show, 75th anniversary black tie gala, and annual golf tournament were wildly successful. Kicked off by a pair of unofficial but equally energized events, FSTNR Week '21 was received by an enthusiastic fastener industry, ready to return to face to face events. Nancy Rich, GHIII, Kam Dorsey, Mike Stamm, Rob "Big Country" Reynolds, Bobby Wegner, Heidi Volltrauer, John "Cool Hand" Butler, Christian Reich, Colin Cochart, Jake "Valdez" Davis and many more! PLUS: Tough Mudder, NFA meet-up & golf results. Run time: 42:01
2021-08-2542 minFully Threaded RadioEpisode #164 - Safe and EffectiveIt’s safe to say Jake “Valdez” Davis of BTM Manufacturing and Bob “GQ” Baer of Abbott-Interfast have been training with varying degrees of intensity, but will their efforts prove effective during the upcoming Tough Mudder event? They compare notes on race prep, current supply chain craziness, and the MWFA super-event happening this summer. (18:52) George Schrull of Buckeye Fasteners describes new “lights out” fabrication capabilities, and confirms there will be plenty of proven fastener-related malted medicinals at this year’s fastener shows. (1:48:57) On the Fastener News Report, Mike McNulty hosts Hayes Bolt & Supply VP...
2021-05-122h 33Fully Threaded RadioEpisode #164 - Safe and EffectiveIt’s safe to say Jake “Valdez” Davis of BTM Manufacturing and Bob “GQ” Baer of Abbott-Interfast have been training with varying degrees of intensity, but will their efforts prove effective during the upcoming Tough Mudder event? They compare notes on race prep, current supply chain craziness, and the MWFA super-event happening this summer. (18:52) George Schrull of Buckeye Fasteners describes new “lights out” fabrication capabilities, and confirms there will be plenty of proven fastener-related malted medicinals at this year’s fastener shows. (1:48:57) On the Fastener News Report, Mike McNulty hosts Hayes Bolt & Supply VP, Kelly Cole with FDI coverage, headline round u...
2021-05-122h 33Fully Threaded RadioFTR160 Excerpt - Tough MudderJake "Valdez" Davis of BTM Manufacturing and John "Cool Hand" Butler from The Olander Company inadvertently sign up for a grueling obstacle course race. But like the resilient industry they support, they’re sure to make a strong finish.Run time: 4:52
2021-03-1004 minFully Threaded RadioFTR160 Excerpt - Tough MudderJake "Valdez" Davis of BTM Manufacturing and John "Cool Hand" Butler from The Olander Company inadvertently sign up for a grueling obstacle course race. But like the resilient industry they support, they’re sure to make a strong finish.Run time: 4:52
2021-03-1004 minFully Threaded RadioEpisode #160 - Strange But GoodThe fastener industry reports booming business, while the world at large seems poised for something else. What gives? Tough guys Jake “Valdez” Davis of BTM Manufacturing and John "Cool Hand" Butler of the Olander Company attempt to solve this riddle as they take on the obstacle course that is the screw biz (1:36:35). Case in point: Logistics expert, Chris Donnell of Scanwell, describes the outlook for inbound sea and air shipments, as importers contend with ongoing massive disruptions (22:08). Eurolink Fastener Supply Service president, Craig Penland, has the pedal to the metal, as he offers his take on air cargo from Euro...
2021-01-212h 35Fully Threaded RadioEpisode #160 - Strange But GoodThe fastener industry reports booming business, while the world at large seems poised for something else. What gives? Tough guys Jake “Valdez” Davis of BTM Manufacturing and John "Cool Hand" Butler of the Olander Company attempt to solve this riddle as they take on the obstacle course that is the screw biz (1:36:35). Case in point: Logistics expert, Chris Donnell of Scanwell, describes the outlook for inbound sea and air shipments, as importers contend with ongoing massive disruptions (22:08). Eurolink Fastener Supply Service president, Craig Penland, has the pedal to the metal, as he o...
2021-01-212h 35
Podcast de La Gran Evasión304-Prisioneros -Denis Villeneuve- La Gran EvasiónBienvenidos a una nueva edición de La Gran Evasión, esta fría noche visitamos los rincones más oscuros del corazón de los hombres.
Buscamos a nuestra hija, más allá de la razón, más allá de los limites de la comprensión, mas allá de la piedad y la Fe…Una búsqueda con nuestras almas como único contrapeso.
Prisioneros, Denis Villeneuve, 2013.
Prisioneros es una obra Negra y Sombría, con una atmósfera amenazante, que llena de desasosiego e incomodidad al espectador.
Parece que estamos en una comunidad idílica, a los pies de las montañas de...
2020-12-281h 27Fully Threaded RadioEpisode #158 - Don't Mess with JessIf the fastener business sometimes feels like mortal combat, one group seems prepared. YFP president, Jake Glaser leads a wide ranging conversation with fellow youthful thread warriors London Penland, of Eurolink, and Young Fastener Professional of the Year, Jessi Solt, that reveals a true fighting spirit (1:22:06). Meanwhile, the fastener industry inducted the far less bellicose John “Cowboy” Wachman, and G.L. Huyett CEO, Tim O’Keeffe to its Hall of Fame (16:34). During the Fastener News Report, battle hardened news editor, Mike McNulty hosts ITR Economics analys...
2020-11-212h 15Fully Threaded RadioEpisode #158 - Don't Mess with JessIf the fastener business sometimes feels like mortal combat, one group seems prepared. YFP president, Jake Glaser leads a wide ranging conversation with fellow youthful thread warriors London Penland, of Eurolink, and Young Fastener Professional of the Year, Jessi Solt, that reveals a true fighting spirit (1:22:06). Meanwhile, the fastener industry inducted the far less bellicose John “Cowboy” Wachman, and G.L. Huyett CEO, Tim O’Keeffe to its Hall of Fame (16:34). During the Fastener News Report, battle hardened news editor, Mike McNulty hosts ITR Economics analyst, Alex Chausovsky to discuss the shocking FDI numbers, and to size up prospects for lo...
2020-11-212h 15Fully Threaded RadioEpisode #156 - Virtual VegasThe one sure bet in the fastener industry is the Vegas show. But with this year’s long-odds cancellation, the FTR boys needed a way to unload their huge supply of giveaway Vegemite. They decided to set up a virtual booth anyway to see if the format could lure in any takers, and to get a reading of the screw biz during the strangest year on record. Bryn Stock, Jake Davis, Mike Topolewski, Matt Boyd, "Iron" Bill Armstrong, Cari Bailey, Tom Buddenbohn and the always coiffed Rosa Hearn make their way to the virtual show floor to share their th...
2020-09-221h 53Fully Threaded RadioEpisode #156 - Virtual VegasThe one sure bet in the fastener industry is the Vegas show. But with this year’s long-odds cancellation, the FTR boys needed a way to unload their huge supply of giveaway Vegemite. They decided to set up a virtual booth anyway to see if the format could lure in any takers, and to get a reading of the screw biz during the strangest year on record. Bryn Stock, Jake Davis, Mike Topolewski, Matt Boyd, "Iron" Bill Armstrong, Cari Bailey, Tom Buddenbohn and th...
2020-09-221h 53
¡Ey Jake!Día 08: Operación todos en casa | ¿Por qué nos multan por salir de la casa, allí no entra el virus?¿Qué te estas preguntando hoy?María José ¿por qué nos multan por salir de la casa?María José, imagínate que al principio, cuando se supo que el virus con corona quería visitarnos, nuestros gobernantes decidieron, que si no era necesario salir a la calle, nos quedáramos en casa, disfrutáramos de la compañía de nuestros seres queridos, y así este villano se aburriera al no tener con quién hablar. Pero muchas personas ¡no hicieron caso! Y por eso, el gobierno tomó la decisión de hacer que quienes se encuentren...
2020-04-1202 min
¡Ey Jake!Día 07: Pequeños invasores | ¿Por qué todos hablan de ese virus con corona y por qué hay tanta información?¿Qué te estas preguntando hoy?Pregunta Oriana ¿por qué todos hablan de ese virus con corona? ¡Oriana, yo me preguntaba lo mismo!Imagínate que existe un grupo de pequeños invasores invisibles, que solo se pueden ver con microscopios. A esos, nuestros superhéroes de capa blanca los llaman virus. Este villano con corona era un virus desconocido, llegó sin ser invitado. Nuestros doctores y científicos no sabían de él. Así que se encendió una alarma en todos los países, porque ninguno quería su visita. Las noticias com...
2020-04-0902 minFully Threaded RadioEpisode #150 - QuarantinedThe fastener industry was interviewed at the precipice of dramatic upheaval during the recent Pac-West/NFDA joint conference. None could have foreseen what was actually soon to unfold at the time FTR placed its microphone in front of industry fixtures Frank DeVito, Heidi Volltrauer, Jun Xu, Doug Ruggles, John “Cool Hand” Butler, Jim Howard, Hans Fuller, Tracey Lumia, Jake Davis and many more (41:15). Würth Eastern Region VP Eric Wilk explains a key benefit of growth by acquisition (20:44). Distribution visionary Ian Heller coaches Earne...
2020-03-192h 37Fully Threaded RadioEpisode #150 - QuarantinedThe fastener industry was interviewed at the precipice of dramatic upheaval during the recent Pac-West/NFDA joint conference. None could have foreseen what was actually soon to unfold at the time FTR placed its microphone in front of industry fixtures Frank DeVito, Heidi Volltrauer, Jun Xu, Doug Ruggles, John “Cool Hand” Butler, Jim Howard, Hans Fuller, Tracey Lumia, Jake Davis and many more (41:15). Würth Eastern Region VP Eric Wilk explains a key benefit of growth by acquisition (20:44). Distribution visionary Ian Heller coaches Earnest Machine president Kirk Zehnder in the quest to defend against online marketplaces (1:38:38). On the Fastener News...
2020-03-192h 37Fully Threaded RadioEpisode #149 - Best ThreadedAre services the critical factor for distributor survival in the new market? What caused the dramatic shift in the FDI reading? Which fastener association is best dressed? MWFA president Paula Evitts along with fellow officer, the debonair George Hunt III of Brighton Best, share their view of the fastener biz as they preview a quasi-milestone industry event (1:28:24). Distribution Strategy founder Ian Heller returns to explain his formula for business success in the digital economy (19:37). BTM Manufacturing honcho Jake Davis joins Mike McNulty on the Fastener News Report (56:35). Fastener Fair...
2020-02-191h 59Fully Threaded RadioEpisode #149 - Best ThreadedAre services the critical factor for distributor survival in the new market? What caused the dramatic shift in the FDI reading? Which fastener association is best dressed? MWFA president Paula Evitts along with fellow officer, the debonair George Hunt III of Brighton Best, share their view of the fastener biz as they preview a quasi-milestone industry event (1:28:24). Distribution Strategy founder Ian Heller returns to explain his formula for business success in the digital economy (19:37). BTM Manufacturing honcho Jake Davis joins Mike McNulty on the Fastener News Report (56:35). Fastener Fair USA is just around the corner, show manager Bob Chiricosta...
2020-02-191h 59
Post-CreditosDonnie Darko - Cine Stereo¡Bienvenidos a Cine Stereo! Un nuevo programa de Post-Creditos, el lugar en donde "escucharemos el cine". En la emisión del día de hoy analizamos la fascinante obra de Richard Kelly, Donnie Darko, enigmática película del 2001 protagonizada por Jake Gyllenhaal y cuya música corre a cargo de Michael Andrews
¿Qué les parece este nuevo formato de Post-Creditos? ¿Qué película les gustaría tener en una futura edición de Cine Stereo? Cuéntanos a través de redes sociales.
Twitter: https://twitter.com/postcreditos1
Instagram: https://www.instagram.c...
2019-10-192h 18Fully Threaded RadioEpisode #144 - Flavor SaverFalling in the pool during this year’s International Fastener Expo is something everyone miraculously managed to avoid, despite the intensity of the networking and revelry at the welcome gala extravaganza. Even the life guards were impressed nobody got wet. Show coverage of the fastener industry’s largest trade event features comments from Hall of Fame inductees Mr. Ed McIlhon and Marty Nolan, and YFP award recipient Baron Yarborough (47:06), along with floor interviews with Bernie Longen, Heidi Voltrauer, Bill Unferth, Michelle Richards, Jake Davis, Bill Armstrong, Mike Topolewski, Wayne “Captain Smooth” Wishnew, and many more. Industry anchorman, Mike McNulty welcomes...
2019-09-282h 08Fully Threaded RadioEpisode #144 - Flavor SaverFalling in the pool during this year’s International Fastener Expo is something everyone miraculously managed to avoid, despite the intensity of the networking and revelry at the welcome gala extravaganza. Even the life guards were impressed nobody got wet. Show coverage of the fastener industry’s largest trade event features comments from Hall of Fame inductees Mr. Ed McIlhon and Marty Nolan, and YFP award recipient Baron Yarborough (47:06), along with floor interviews with Bernie Longen, Heidi Voltrauer, Bill Unferth, Michelle Richards, Jake Davis...
2019-09-282h 08Fully Threaded RadioEpisode #141 - Trade War Drinking GamesIs it a national trade policy or a drinking game? The industry speaks out on tariffs during floor interviews from Fastener Fair USA (20:54) and FastenerTech ‘19 (1:27:25) featuring Wayne Wishnew, Jake Davis, GH III, Rob Reynolds, Jackie “Kind of a Big Deal” Ventura, JR Prahl, Chris McCaffrey, GQ, Bill Boak, Joanne Bialas and many more. Brighton Best VP Steve Andrasik joins industry anchorman Mike McNulty on the Fastener News Report to analyze mixed FDI numbers (57:05). Carmen Vertullo explains how long is too long for structural bolts during the Fastener Training Minute (1:21:50). Plus, Marc Strandquist announces a big change (14:02), and the MWFA golf t...
2019-06-122h 02Fully Threaded RadioEpisode #141 - Trade War Drinking GamesIs it a national trade policy or a drinking game? The industry speaks out on tariffs during floor interviews from Fastener Fair USA (20:54) and FastenerTech ‘19 (1:27:25) featuring Wayne Wishnew, Jake Davis, GH III, Rob Reynolds, Jackie “Kind of a Big Deal” Ventura, JR Prahl, Chris McCaffrey, GQ, Bill Boak, Joanne Bialas and many more. Brighton Best VP Steve Andrasik joins industry anchorman Mike McNulty on the Fastener News Report to analyze mixed FDI numbers (57:05). Carmen Vertul...
2019-06-122h 02
The Fakist (2018)1x08 The Totally Original Fakist Christmas SpecialCelebrate the holidays with a totally original holiday story!At a secluded karate retreat on Christmas Eve, disgraced fake news journalist Paul DaFoe is visited by 3.5 spirits who take him on a surprising journey through his past, present, and future. In Somewhere West of New York City, LeAnn stands vigilant in the control room, working to save a newscast with no anchor. Will Paul learn the true meaning of Christmas, or will The Fakist fade away forever?All that, plus ‘Twas The Night Before Kanye read by Coverville’s Brian Ibbott.BROUGHT TO YOU...
2018-12-2352 minFully Threaded RadioEpisode #134 - Got Zarf?The fastener industry reacts to the news and events of this year’s International Fastener Expo, featuring perennial expo observers Jake Davis, of BTM Manufacturing, and Rosa “The Riveter” Hearn, of Brighton Best International (1:07:51). Also, from the show floor, the lovely and talented Lynn Dempsey speaks with Fastener Industry Hall of Fame award winners Robbie Gilchrist and Bob Sachs, and YFP award winners Jun Xu and Peggy Hsieh of BBI, along with Hans Fuller, Matt Boyd, John “Cool Hand” Butler, Don Nowak, Rich Cavoto, Baron “The Bearded Nut” Yarborough and more (20:01). Fastener Technology International editor Mike McNulty breaks industry headlines and...
2018-11-172h 46Fully Threaded RadioEpisode #134 - Got Zarf?The fastener industry reacts to the news and events of this year’s International Fastener Expo, featuring perennial expo observers Jake Davis, of BTM Manufacturing, and Rosa “The Riveter” Hearn, of Brighton Best International (1:07:51). Also, from the show floor, the lovely and talented Lynn Dempsey speaks with Fastener Industry Hall of Fame award winners Robbie Gilchrist and Bob Sachs, and YFP award winners Jun Xu and Peggy Hsieh of BBI, along with Hans Fuller, Matt Boyd, John “Cool Hand” Butler, Don Nowak, Rich Cavoto, Baron “The Bearded...
2018-11-172h 46
The Leafs Geeks PodcastEpisode 106: Draft Preview (Final Edition)Ryan Biech from Canucks Army & The Athletic joins us this week to break down some of our favourite players in the 2018 NHL Draft using both video & statistical analysis (combining 'the eye test' with 'the numbers')4:47 – Ryan Merkley (RHD, Guelph, OHL)7:36 – Isac Lundestrom (C/LW, Lulea, SHL) and “The 51% Rule”11:27 – Jonatan Berggren (C/RW, Skelleftea J20, SuperElit) and Dominik Bokk (RW, Vaxjo J20, SuperElit)14:13 – Grigori Denisenko (LW, Lokomotiv J20, MHL)15:47 – Ty Dellandrea (C, Flint, OHL), Ryan McLeod (C, Mississauga, OHL), and Akil Thomas (C, Niagara, OHL)20:11 – Alexander Alexeyev (LHD, Red Deer, WHL)22:08 – Bode Wilde (LHD, USNDTP...
2018-06-191h 12
Multiverso SonoroEpidosio 32: Deadpool 2, Solo y cine primaveralBienvenidos al episodio 32 de Multiverso Sonoro. Tras un mini parón vacacional retomamos nuestra pasión y en esta ocasión le damos muy fuerte al cine. Y además del cine más actual tenemos alguno que se nos había quedado en la recámara... No nos enrollamos más y os dejamos la escaleta de este episodio 32:
0h 00m 00s Introducción
0h 03m 11s Noticias cinematográficas.
- Steven Spielberg hará una película del universo súper heroico de DC Cómics.
- Nuevos fichajes del universo cinematográfico de Marvel: John Boyega y Jake Gyllenhaal...
...
2018-06-041h 39The Leafs Geeks PodcastEpisode 102: 2018 Draft PreviewCam Robinson from Dobber Prospects joins us this week to preview the upcoming NHL Draft.1st Round Defencemen2:57 – Ryan Merkley.7:16 – Bode Wilde.9:54 – Nils Lundkvist.12:20 – Best Player Available vs. the added value of a RHD.14:17 – Calen Addison.15:52 – Jett Woo.17:28 – Rasmus Sandin.1st Round Forwards19:56 – Martin Kaut.22:00 – Vitali Kravtsov.24:22 – Dominik Bokk.25:58 – Grigori Denisenko.28:10 – Jonatan Berggren.1:03:50 – Akil Thomas & Ryan McLeod.2nd Round Prospects32:29 – Jonny Tychonick.34:27 – Nicolas Beaudin.36:40 – Filip Kral.38:21 – Toni Utunen.40:52 – Niklas Nordgren.43:11 – David Gustafsson.45:04 – Jake Wise.46:45 – Jay O’Brien.Mid...
2018-05-151h 07
Fully Threaded RadioEpisode #127 - Hello ClevelandThe fastener industry converged at the rock hall of fame recently, and it was no mistake, although there was some confusion about the ground transportation. Jammin' Jake Davis of BTM Manufacturing and Brighton Best’s Rosa Hearn share their experiences from Fastener Fair USA (1:28:25). The lovely and talented Lynn Dempsey joined Brian as they traveled to Costa Rica for the NFDA 50th anniversary conference, and they returned with more than tan lines (15:27). R. W. Baird analyst, David Manthey explains the latest rockin’ FDI numbers (1:02:40). Industry expert, Carmen Vertullo, presents the fina...
2018-04-222h 31Fully Threaded RadioEpisode #127 - Hello ClevelandThe fastener industry converged at the rock hall of fame recently, and it was no mistake, although there was some confusion about the ground transportation. Jammin' Jake Davis of BTM Manufacturing and Brighton Best’s Rosa Hearn share their experiences from Fastener Fair USA (1:28:25). The lovely and talented Lynn Dempsey joined Brian as they traveled to Costa Rica for the NFDA 50th anniversary conference, and they returned with more than tan lines (15:27). R. W. Baird analyst, David Manthey explains the latest rockin’ FDI numb...
2018-04-222h 31
Fully Threaded RadioEpisode #121 - This is Your IFEDuring a landmark podcast that will stand as a historic marker of many lives in fastening, industry pro jocks Jake Davis, of BTM Manufacturing, and Baron “Best Beard” Yarborough, of Spring Bolt and Nut, join in for the annual Vegas show round up (1:20:32). Fellow luxury resort connoisseur, Bill Akerfeldt of Lindstrom comments on recent price increases as well as accommodations at the show (31:01). Würth EVP Marc Strandquist evaluates FDI numbers with industry anchor, Mike McNulty, on the Fastener News Report (48:12). Continuing his recent marathon of fastener show seminars, Carme...
2017-10-302h 13Fully Threaded RadioEpisode #121 - This is Your IFEDuring a landmark podcast that will stand as a historic marker of many lives in fastening, industry pro jocks Jake Davis, of BTM Manufacturing, and Baron “Best Beard” Yarborough, of Spring Bolt and Nut, join in for the annual Vegas show round up (1:20:32). Fellow luxury resort connoisseur, Bill Akerfeldt of Lindstrom comments on recent price increases as well as accommodations at the show (31:01). Würth EVP Marc Strandquist evaluates FDI numbers with industry anchor, Mike McNulty, on the Fastener News...
2017-10-302h 13Fully Threaded RadioEpisode #119 - Higher GroundAs the eyes of the world survey the devastation of hurricane Harvey, the fastener industry braces for a different kind of landfall. Purple ponchoed storm rider, Baron Yarborough, of Spring Bolt and Nut reports from Houston, Texas. From higher ground in the midwest, Jake Davis of BTM Manufacturing drops in to share his thoughts on growing the business, the upcoming Vegas show, YFP, and a life in the fastener industry, from the filing cabinet to the warehouse and beyond (18:19). Bob “GQ” Baer joins industry anchorman Mike...
2017-08-311h 39
Fully Threaded RadioEpisode #119 - Higher GroundAs the eyes of the world survey the devastation of hurricane Harvey, the fastener industry braces for a different kind of landfall. Purple ponchoed storm rider, Baron Yarborough, of Spring Bolt and Nut reports from Houston, Texas. From higher ground in the midwest, Jake Davis of BTM Manufacturing drops in to share his thoughts on growing the business, the upcoming Vegas show, YFP, and a life in the fastener industry, from the filing cabinet to the warehouse and beyond (18:19). Bob “GQ” Baer joins industry anchorman Mike McNulty to explain the July FDI numb...
2017-08-311h 39
Monster America - Dirty KingsHard Luck KillerArtist: Monster America
Album: Dirty Kings
Song: Hard Luck Killer
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1004 min
Monster America - Dirty KingsU.S. CitiesArtist: Monster America
Album: Dirty Kings
Song: U.S. Cities
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1003 min
Monster America - Dirty KingsLoose & EasyArtist: Monster America
Album: Dirty Kings
Song: Loose & Easy
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1004 min
Monster America - Dirty KingsDevil WorldArtist: Monster America
Album: Dirty Kings
Song: Devil World
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1004 min
Monster America - Dirty KingsBreakdownArtist: Monster America
Album: Dirty Kings
Song: Breakdown
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1005 min
Monster America - Dirty KingsInto the SunArtist: Monster America
Album: Dirty Kings
Song: Into the Sun
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1003 min
Monster America - Dirty KingsHardenedArtist: Monster America
Album: Dirty Kings
Song: Hardened
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1003 min
Monster America - Dirty KingsWastingArtist: Monster America
Album: Dirty Kings
Song: Wasting
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1004 min
Monster America - Dirty KingsStrayArtist: Monster America
Album: Dirty Kings
Song: Stray
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1003 min
Monster America - Dirty KingsBroken by TomorrowArtist: Monster America
Album: Dirty Kings
Song: Broken by Tomorrow
Copyright: © (p) 2009 Jake Dudas (SOCAN)
www.jakedmusic.com
2013-03-1003 min
Live in Studio (2012) - Instrumental Guitar Performance RecordingHarvest Moon (Neil Young)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2305 minLive in Studio (2012) - Instrumental Guitar Performance RecordingWheat Kings (Tragically Hip)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2303 minLive in Studio (2012) - Instrumental Guitar Performance RecordingI Can't Help Falling in Love With You (Elvis)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2302 minLive in Studio (2012) - Instrumental Guitar Performance RecordingFading Light (Jake Dudas)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
© 2012 Jake Dudas (SOCAN). All rights reserved.
2013-02-2303 minLive in Studio (2012) - Instrumental Guitar Performance RecordingIn My Time (Led Zeppelin Medley)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2304 minLive in Studio (2012) - Instrumental Guitar Performance RecordingCrash (Dave Matthews Band)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2303 minLive in Studio (2012) - Instrumental Guitar Performance RecordingWild Horses (Rolling Stones)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2306 minLive in Studio (2012) - Instrumental Guitar Performance RecordingBetter Together (Jack Johnson)This is a live studio performance. It's a great example of a diverse live set. This one covers material you might hear at a wedding, dinner, cocktail party, or just about anything in between.
This was performed as one single live set. No retakes. No fixing mistakes. No overdubs. Just one guitar and a hi-hat. The delay you hear was done live through a delay pedal and into the board.
All songs except “Fading Light” are for audition purposes only. Not for sale or distribution.
2013-02-2303 min