Shows
ModelGeek's PodcastMGPC EP 111 PAXCON 2025 Wrap Up...and Other Stuff!Welcome to Episode 111 of The Modelgeeks Podcast! In this episode our main topic of discussion will be on our local model club’s model show, the Southern Maryland Scale Modeler’s PAXCON 2025.We’ll give you a recap of the show, share some lessons learned and thank all those who made it happen.We had a few visitors in town for the show, a couple international guests as well. Mr. Robbie Nauffts (aka The Model Guy of YouTube fame) from Calgary Alberta, Canada, and Mr. Kris De Winter who flew in from Groningen, Netherl...
2025-10-181h 52ModelGeek's PodcastMGPC Ep. 107 Nats Short...Wrap Up!Welcome to Episode 107 of The Modelgeeks Podcast! We are back home from the 2025 IPMS USA Nationals in Hampton, VA. We had an absolute great time over the course of the 4-day event.Rather than wait until our next episode to drop a “wrap up” or “recap” we thought we would stick to the plan of the last few days and drop one more “Short” to talk about the awards, judging, thank a few folks, and bring it on home.No interviews but a few mentions of some websites to check out so catch those links b...
2025-08-1233 minModelGeek's PodcastMGPC Ep. 107 Nats Short, Day 4Welcome to Episode 107, Day 4 of The Modelgeeks Podcast! We are on-site at the IPMS USA Nationals in Hampton, VA!Final day here at the Nats and it has been a great time! Thank you all for listening in and following along. Today we had the opportunity to talk with author, Chief Petty Officer Venner Milewski USN (Ret) who has a series of book covering U.S. Naval vessels titled Fighting Ships of the U.S. Navy 1883-2019. The series covers a wide range of ships, and the books are a must for ship bu...
2025-08-101h 00ModelGeek's PodcastMGPC Ep.107 Nats Short, Day 3Welcome to Episode 107, Day 3 of The Modelgeeks Podcast! We are on-site at the IPMS USA Nationals in Hampton, VA! We had another great day here at The Nats! We had the opportunity to interview Bert and Rock from Detail and Scale publications, as well as Dave Roof of Flying Leathernecks Scale Creations. We also had another young modeler attending The Nationals sit down and share her perspective on the hobby. It was another long but enjoyable day on the floors here at Nats!We would like to thank all you listeners out the...
2025-08-0950 minModelGeek's PodcastMGPC Ep. 107 Nats Short, Day 2Welcome to Episode 107, Day of The Modelgeeks Podcast! We are on-site at the IPMS USA Nationals in Hampton, VA! We had another great day here at The Nats! We had the opportunity to interview the guys heading up the 2026 IPMS USA Nationals out in Fort Wayne, IN in 2026. Have a listen and see what they have in store for us, and the family too! We also met a young modeler today who is building armor models and designing his own 3D printed items to detail them with! Have a listen to 13-year-old Eli describe what the h...
2025-08-081h 06ModelGeek's PodcastMGPC Ep. 107 Nats Short, Day 2Welcome to Episode 107, Day of The Modelgeeks Podcast! We are on-site at the IPMS USA Nationals in Hampton, VA! We had another great day here at The Nats! We had the opportunity to interview the guys heading up the 2026 IPMS USA Nationals out in Fort Wayne, IN in 2026. Have a listen and see what they have in store for us, and the family too! We also met a young modeler today who is building armor models and designing his own 3D printed items to detail them with! Have a listen to 13-year-old Eli describe what the h...
2025-08-0800 minModelGeek's PodcastMGPC Ep. 107 Nats Short Day 1Welcome to Episode 107 of The Modelgeeks Podcast! In this episode we are on-site at the IPMS USA Nationals in Hampton, VA. Rather than drop a single episode covering the Nats we wanted to try something a little different. Over the course of the 4-day Nats we will record short segments covering the day’s events, what caught our eye in the display hall, what products are hot in the vendor hall, and most importantly who we meet and speak with about the hobby. We hope to get in a few interviews with folks in the hobby, be it...
2025-08-0721 minModelGeek's PodcastMGPC Ep. 103, Your Modeling Influences w/ Guest Rob RiviezzoWelcome to Episode 103 of The Modelgeeks Podcast! In this episode we are privileged to have Mr. Rob Riviezzo, host of the “Modeling Insanity” podcast” and the “Quarter Scale Madness” podcast, sitting in the studio with us. Rob shares his insight into the hobby, and his own modeling influences with us. Rob is also the U.S. Associate Editor of Military Modelcraft International magazine (http://www.militarymodelcraft.co.uk/), and I’m sure a huge influence in his own right on many armor modellers out there. In response to an email from listener Luis Toledo, of Lancaster CA, we get int...
2025-06-212h 17ModelGeek's PodcastMGPC Episode 100 "The Big Hundo!!!"Welcome to Episode 100 of The ModelGeeks Podcast—a major milestone and a celebration of our journey through the world of scale modeling! We finally made it to triple digits, and we couldn’t have done it without YOU. A heartfelt thank you to all our listeners for your incredible support along the way. Here’s to the next 100 episodes!In this episode, the Geeks reflect on the road so far and look ahead to what’s next. Of course, we've been busy at the bench (and burning up the credit cards), so we’ll chat about the...
2025-05-102h 50ModelGeek's PodcastMGPC Ep. 98 Researching and Planning Your Model Build...A Listener Asks??Welcome to Episode 98 of The Modelgeeks Podcast! We’ve all been busy at the bench through March! We’ll talk about cool new items coming our way, and what we’ve picked up lately, as well as pay a visit to the Modelgeeks web page’s “Listener Gallery” and have a look at the great work from you folks out there. For our main topic of discussion, we pull from the Mail Bag! Mr. Robbie Nauffts of Alberta Canada asks: “How do you research a subject for a build?” Are you looking at a spec...
2025-04-122h 05ModelGeek's PodcastMGPC Episode 95 "Interview With Mark Robson, Owner of Kōtare Scale Models"Welcome to Episode 95 of The Modelgeeks Podcast! In this episode we were very fortunate in this episode to sit down and speak with Mark Robson of Kōtare Scale ModelsAs always, we’ve all been busy at the bench…and at our keyboards! We’ll talk about cool new items coming our way, and what we’ve worn out the ol’ credit card on as well.We would like to thank all you listeners out there for the continued support you have given the show. As we roll through Winter and on towards springtime, I hope that...
2025-03-013h 07ModelGeek's PodcastMGPC Episode 93 Season 5 Kickoff!!Welcome to Episode 93 of The Modelgeeks Podcast! In this episode, we kick off Season 5 and catch up with what we have all been up to during our extended seasonal break. I don’t think we planned to be away from the mic for a full month and a half but…We’ve all been busy at the bench…and at our keyboards! We’ll talk about cool new items coming our way, and what we’ve worn out the ol’ credit card on as well.We would like to thank all you listeners out there for the continu...
2025-02-012h 31ModelGeek's PodcastMGPC Episode 90: "Magical History Tour"Welcome to Episode 90 of The Modelgeeks Podcast! In this episode, after a little banter in the beginning, we discuss what we are in work on, what we have picked up lately, and what new items are out there, We finish with a recap of El Presidentè's experience in Belgium, Luxembourg, and the Netherlands, to include Scale Model Challenge 2024.We would like to thank all our listeners out there for the continued support you have given the show. As we roll through Fall and on towards winter, I hope that your bench is active heading in...
2024-11-162h 37ModelGeek's PodcastMGPC Episode 89 "Tales from the Aftermarket...Good, Bad...Ugly!!" Plus a sit down with Hypersonic ModelsWelcome to Episode 89 of The Modelgeeks Podcast! In this episode, we kick off with what we are all in work on, what new items are out there, and what we have picked up lately. El-Presidenté will tell us “What’s New in 72!”, some cool stuff coming out of the recent All Japan Model and Hobby Show, and we’ll end with a discussion on aftermarket kit items…what’s Good, what’s Bad, and what’s just Ugly! In between we have an interview with Hypersonic Models own Jeffrey Kubiak, coming to us all the way from Nara, Japan to tel...
2024-10-263h 30ModelGeek's PodcastMGPC Episode 86 "Vignettes, Dioramas, and ... D-ran??"Welcome to Episode 86 of The Modelgeeks Podcast! We have a full crew tonight! After a bit of banter and D-ran catching us up on his time in Oz, we share what is on our bench and what we have picked up lately. We talk about some new modeling related items we’ve found out there and El-Presidenté tells us “What’s New in 72!”. After a Show & Contest update and Mail Call we discuss Vignettes & Dioramas, challenges in creating them and our attempts in the past.We would like to thank all our listeners out there for the contin...
2024-09-221h 52ModelGeek's PodcastMGPC Episode 85 "Virginia Shootout" Wrap-up &...Where's D-ran??!!The Geeks hit the road and hit up the IPMS Roanoke Valley’s “Virginia Shootout” show. Nothing beats a quick weekend trip with your modeling buddies, especially when a show is happening, the kit deals are HOT and the Mexican food is muy bueno! Toss in a few beers with friends and it’s practically impossible to top for a real Modelgeek! In this episode we recap our trip to southwestern Virginia and the Virginia Shootout. We had a great time, saw some great models and made some awesome deals on kits that...
2024-08-242h 01ModelGeek's Podcast"Virginia Shootout" Wrap-Up & ...Where's D-ran??!!The Geeks hit the road and head southwest to the IPMS Roanoke Valley’s “Virginia Shootout” show. Nothing beats a quick weekend trip with your modeling buddies, especially when a show is happening, the kit deals are HOT and the Mexican food is muy bueno! Toss in a few beers with friends and it’s practically impossible to top for a real Modelgeek! In this episode we recap our trip to Virginia and the Virginia Shootout. We had a great time, saw some great models, and made some awesome deals on kits that we’d each been loo...
2024-08-242h 01ModelGeek's PodcastMGPC Interview with Modellers Without BordersWelcome to a special episode of The Modelgeeks Podcast! In this episode, Frilldo and Whitey sit down and Interview, Tim Holland President, Bruce Worrall Vice President Canada and VP of Exhibitions and Dave Goldfinch Vice President and talk about the new model organization “Modellers Without Borders”. Frilldo and whitey ask the important questions of who, what, when, why, and how. Modellers Without Borders will exist alongside IPMS and AMPS. Our illustrious guest go into detail about how they are set up and what belonging to the organization will be like.We would like to thank all th...
2024-08-1355 minModelGeek's PodcastMGPC Episode 84 "Modeling on the Go".Welcome to Episode 84 of The Modelgeeks Podcast! In this episode, the Modelgeeks take the listeners for a lap in the pattern and discuss what new items they have picked up since the Nats (really???). d-Ran is out for work reasons and the Geeks have the con! The geeks answer the listener email, and give a rundown of what is new in the hobby.The Geeks also discuss their travel plans for the upcoming IPMS Roanoke Virginia Shootout 2024. For the main topic, Whitey, El Presidente, Nemo and Frilldo discuss the items they use for modeling on the...
2024-08-101h 26ModelGeek's PodcastMGPC Episode 83 "2024 Nats Wrap!"2024 Nats Wrap!Welcome to Episode 83 of The Modelgeeks Podcast! Tonight we discuss 2024 USA Nats. Nemo keeps us focused on how much fun we had in Madison, Wisconsin, what we thought of the venue, the contest room, the Tiger Meet, the vendors, and of course the PEOPLE! Along the way we also chat about what we got, what we missed, and which models we liked the most. We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about as w...
2024-07-292h 33ModelGeek's PodcastMGPC Episode 82. "Rollin',Rollin', Rollin'!"Welcome to Episode 82 of The Modelgeeks Podcast! We have a full crew tonight! After a bit of banter and a sea story or two, we share what is on our bench and what we have picked up lately. We talk about some new modeling related items we’ve found out there and El-Presidenté tells us “What’s New in 72!”. After a Show & Contest update and Mail Call we discuss Tires & Wheels, how we paint them, our preferred methods of masking, and how we do a bit of simple weathering. We would like to thank all our listeners o...
2024-07-132h 52ModelGeek's PodcastMGPC Episode 81 "We Got a Deadline People!!"Welcome to Episode 81 of The Modelgeeks Podcast! In this episode, we kick off with what we are in work on, what new items are out there, and what we have picked up lately. After a few consecutive episodes being down a man, D-Ran is back in front of the mic along with the whole crew. El-Presidenté will tell us “What’s New in 72!”, and we’ll end with a discussion on DEADLINES! Some like a deadline to keep them on track, while others despise them and stay well clear of any reason to set one. We would li...
2024-06-291h 20ModelGeek's PodcastMGPC Episode 80 "Transporting models and how do you pack them".Welcome to Episode 80 of The Modelgeeks Podcast! In this episode, the Modelgeeks discuss how they pack and transport their models. The same process can be used to store your models as well. Frilldo takes the geeks for a lap in the pattern with an update on the Privateer, trying to avoid having to buy dinner for the other geeks. The rest of the geeks give an update of what is on their benches and do a run down of the email and a recap on the FB Model Geeks Model shack page.For the main topi...
2024-06-152h 01ModelGeek's PodcastMGPC Episode 79 "Tips and Tricks, What's Your Favorite?"Welcome to Episode 79 of The Modelgeeks Podcast! I should be calling this one "Better Late Than Never"! D-Ran here coming at ya with a heart felt apology for being late with the episode but life just seemed to get in the way.We all have that one tip or trick that we've picked up along the way that's helped us become just a little bit better at the hobby. In this EXCITING episode the Geeks will discuss what their favorite tips and tricks are. We would like to thank all you listeners out there for the c...
2024-06-081h 54ModelGeek's PodcastMGPC Episode 78 "Warts, Warts and More Warts; how do you deal with them?"Welcome to Episode 78 of The Modelgeeks Podcast! In this EXCITING episode, we kick off with what we are in work on, what new items are out there, and what we have picked up lately. We dive into El-Presidenté's exciting news regarding is recent trip to the UK!Rounding out the episode with our main topic we discuss those disgusting little things we call "warts". What are they? How do you prevent them and last but not least, do really even care about em?We would like to thank all you listeners out there...
2024-05-192h 10ModelGeek's PodcastMGPC Episode 77 "Favorite Subject, Who Does it Best?"Welcome to Episode 77 of The Modelgeeks Podcast! In this episode, we kick off with what we are in work on, what new items are out there, and what we have picked up lately. We discuss some new kits and accessories that we’ve seen lately, and El-Presidenté will tell us “What’s New in 72!”. Then Nemo, Frilldo, and Whitey provide a summary of Northern Virgina IPMS’ Model Classic, while El-Presidenté gives us his impressions of his first AMPS Nationals at South Bend.We end with a discussion on what we believe are the best kits of some of our f...
2024-05-052h 30ModelGeek's PodcastMGPC Episode 76 "There’s Always Room for Improvement!”Welcome to Episode 76 of The Modelgeeks Podcast! In this episode, we kick off with what we are in work on, what new items are out there, and what we have picked up lately. D-ran and Whitey touch briefly of their recent trip up to MosquitoCon32 but for more on that go back and check out last weeks “off timeline” drop of the MosquitoCon32 Wrap Up show. El-Presidenté will tell us “What’s New in 72!”, and we’ll end with a discussion on what we think each of us can or would like to improve upon in each of our model building...
2024-04-202h 26ModelGeek's PodcastModelGeeks Special "MosquitoCon 32 Wrap Up"Please join Whitey and Darrin on this special show wrap up episode of the "MosquitoCon 32" hosted by IPMS Wayne, NJ. This show is the second Scale Model Show Season of the season in the IPMS Region Two area and is their 32nd consecutive. We the privilege of having a couple of special guests join us at the table for a round of interviews that I am sure you will enjoy.So sit back and take a listen, as we discuss the show in general, talk about a little vacform and real space topics with Chris Der...
2024-04-141h 24ModelGeek's PodcastMGPC Episode 75 "You've lost that loving feeling".Welcome to Episode 75 of The Modelgeeks Podcast! In this episode, the Modelgeeks, the Geeks will make their usual lap in the pattern and talk about new kits they acquired, and will discuss and debate the latest model news and new products and go over a few listener emails. For the Geeks main discussion, the Geeks discuss what leads you to lose interest in a model and results in a model not getting finished.Darrin and El Presidente made the journey to Ontario Canada for HeritageCon 16 and have a sit down with Andy Kline from Andy's Hobb...
2024-04-072h 26ModelGeek's PodcastModelGeeks Episode 74 "Negative Modeling, How Do You Deal With It?"Welcome to Episode 74 of The Modelgeeks Podcast! In this episode, the Modelgeeks discuss the age old issue of "Negative Modeling. What's our definition and how do we deal with it when it comes up? As usual we'll discuss what we're in work on, what new items are out there that we may have picked up. We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see...
2024-03-231h 59ModelGeek's PodcastModelGeeks Episode 73 "Dippin Into the Grab Bag!"Welcome to Episode 73 of The Modelgeeks Podcast! In this episode, the Modelgeeks reached out to you the listeners to find out what it is you guys wanted us to talk about. I can tell you that the response was overwhelming!! We took some of the ones that stood out to us and tossed them around for discussion. As usual we'll discuss what we're in work on, what new items are out there that we may have picked up. We would like to thank all you listeners out there for the continued support you have given the sh...
2024-03-092h 05
ModelGeek's PodcastModelGeeks Special "The Old Dominion Open (ODO) Wrap Up"Welcome to the special show wrap up of the "Old Dominion Open" hosted by IPMS Richmond in Richmond, Va. This show marks the beginning of the Scale Model Show Season in IPMS Region Two and is always a special one for the Geeks. We were very fortunate to have some special guests join us at the table for a round of interviews that I am sure you will enjoy.So sit back and take a listen, well discuss the show in general, discuss the show it's self with Richard Leininger (IPMS Richmond VP and Show Cha...
2024-02-291h 55ModelGeek's PodcastModelGeeks Episode 72; "Back to the Future"Welcome to Episode 72 of The Modelgeeks Podcast! In this episode, the Modelgeeks discuss what they are in work on, what new items are out there that they may have picked up, and generally what’s going on in the hobby from the perspective of a bunch of primarily model airplane builders.Have you ever looked back at your past builds and thought to yourself; "I wish I could go back and give that one kit a complete redo."? Well in this episode were going to do just that! We each discuss, not only the kit we wou...
2024-02-242h 22ModelGeek's PodcastModelGeeks Episode 71; "Interview with Rudy and Danielle of LionHeart Hobby"Welcome to Episode 71 of The Modelgeeks Podcast! In this episode, the Modelgeeks discuss what they are in work on, what new items are out there that they may have picked up, and generally what’s going on in the hobby from the perspective of a bunch of primarily model airplane builders.For the main topic we sit down with Rudy and Danielle of LionHeart Hobby in Kyle TX for a talk about what motivated them to take the leap into opening a brick-and-mortar hobby store at a time when, at least in the U.S...
2024-02-102h 26ModelGeek's PodcastModelGeeks Episode 70; "Interview with Jeff Herne"Welcome to Episode 70 of The Modelgeeks Podcast! In this episode, the Modelgeeks say what their model goals are for 2024. They will make their usual lap in the pattern and talk about new kits they acquired, and will discuss and debate the latest model news and new products.Frilldo and Nemo have a sit down with 2024 IPMS Nationals show chairman Jeff Herne and get him to talk about anything and everything NATS. Jeff gives the listeners the latest info and gives his response to the Phase 1 hotel room block fiasco. We would like to than...
2024-01-272h 55ModelGeek's PodcastSpecial Episode: "The Model Podcast Roundtable Series Part 1, The Producers"Welcome to the special episode of The Modelgeeks Podcast! In this Special Episode we bring you our first Model Podcast Roundtable. It's our honor to introduce you to the "Producers". Sit back and listen to each of the Producers as the discuss the inspiration behind their individual podcast as well as many other topics.Check out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see...
2024-01-231h 59ModelGeek's PodcastModelGeeks Episode 69; "Decals, Duh-Cals, and Deckles...Oh MY!".Welcome to Episode 69 of The Modelgeeks Podcast! In this episode, the Modelgeeks are joined by a special guests Gabe Pincelli and Justin Lentz. The Geeks discuss Gabe and Justin’s process for how they do decals on their models and how they avoid Scotts dreaded “color shift”. The Geeks give a run-down of what they are working on as well as a review of some of the latest model news and new kits. Listener email is answered as well. Join the Geeks for the last episode of Season 3! Don’t worry, the Geeks will be back in Janu...
2023-12-022h 56ModelGeek's PodcastModelGeeks Episode 68 "Hanging in the Balance; How do You Balance Your Hobby With Daily Life?"Welcome to Episode 68 of The Modelgeeks Podcast! In this episode, dive into the topic of hobby and home life balance. I don't know about you but it sucks the "MOJO" out of me! Unless you're retired you have the the whole "work" thing looming over you as well as those honey do lists! Follow along as we discuss this very important balance.New tag, #anhouradayCheck out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the lis...
2023-11-112h 51ModelGeek's PodcastModelGeeks Episode 67 "Enough of the Drama, Where to We Go From Here? Our Interview With Rob Booth"Welcome to Episode 67 of The Modelgeeks Podcast! In this episode, we have the honor of sitting down with Rob Booth, Secretary of IPMS. There has been a lot of dram over the past year and a half and it's time to start focusing on the path forward. Join us as we discuss the plans for a road map into the future! Check out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have...
2023-10-282h 55ModelGeek's PodcastModelGeeks Episode 66 "PAXCON23.....That's a Wrap!"Welcome to Episode 66 of The Modelgeeks Podcast! In this episode, we will be breaking down and unpacking our first model show, PAXCON 2023. It turned out to be an awesome weekend and the show exceeded our expectations in every way.Check out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you de...
2023-10-141h 42ModelGeek's PodcastModelGeeks Episode 65; "Intro to 3-D printing with special guest interview Mr. John Colasante"Welcome to Episode 65 of The Modelgeeks Podcast! In this episode, the Modelgeeks are joined by a special guest Mr. John Colasante and he takes the geeks for a brief flyby of the world of 3-D printing. The Geeks change things up and renamed “Whatcha working on” to “What’s in you pattern”. Join them as they give the latest on new kits and the latest info in the world of scale modeling. The Geeks even treat the listeners to Frilldo struggling to close out the show leading to some good laughs. Check out all the PAXCON 2023 info...
2023-09-302h 46ModelGeek's PodcastModelGeeks Episode 64; "Marked Safe from Nats drama Today".Welcome to Episode 64 of The ModelGeeks Podcast! In this episode, the Modelgeeks give their thoughts for the final time on the fallout from the San Marcos NATS. Listen as the Geeks give their thoughts and solutions to some of the most polarizing issues with the national contest. The geeks give a roundup of what is on their benches run through some listener email. The other geeks give Whitey the "business" as he was the only Geek not to make the Nats in San Marcos.Check out all the PAXCON 2023 information here at our club web site...
2023-09-182h 49ModelGeek's PodcastModel Geeks Episode 63, "To You, Our Listeners"Welcome to Episode 63 of The ModelGeeks Podcast!We want this time to thank those that have made the ModelGeeks what it is today, We have been fortunate to have met some of the great people and make some dear friends over the past three seasons, and want to this time to give you a big old ModelGeeks salute.Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the l...
2023-09-042h 49ModelGeek's PodcastModel Geeks Episode 62, "San Marcos, an IPMS Nats to Remember"Welcome to Episode 62 of The ModelGeeks Podcast!We’re back from the 2023 IPMS USA National Convention in San Marcos TX and it was certainly one to remember. IPMS Alamo Squadron hit it our of the park this year! Join us as as El Presidente leads us through a recap our experience and hit the high (and a few low) spots from this years convention.Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a V...
2023-08-192h 08ModelGeek's PodcastModel Geeks Episode 61, "Prelude to a Nats"Welcome to Episode 61 of The ModelGeeks Podcast!We’re dropping this episode a few days early because in this episode we talk about the upcoming…or ongoing 2023 IPMS USA National Convention in San Marcos TX! What are we bringing? What are we looking forward to? Who’s going? Who’s NOT going? (☹ Whitey…). What is the game plan for the MGPC? Settle into the driver’s seat, keep your eye on the road, have a listen, and get there safely!We also discuss what we are In Work on, give you a brief of what’s new out there...
2023-08-022h 05ModelGeek's PodcastModel Geeks Episode 60, "Zombies and Your Stash, Size Does Matter!".Welcome to Episode 60 of The ModelGeeks Podcast! 60??? Are you freaking kidding me?Look like we're a man down this episode. Yes, that was in the last episodes show notes but this time we're missing Frildo as he's on vacation with the Fam! So we welcome Tim Holland, AKA: El Presidente back to the mic! We have done episodes in the past discussing the stash and tackling the subject of "size matters". Well in this episode we're going to give it a little twist! Tim gives the latest on our upcoming inaugural club...
2023-07-222h 40ModelGeek's PodcastModel Geeks Episode 59, "Welcome Bases By Bill to the Geeks Model Shack!!".Welcome to Episode 59 of The ModelGeeks Podcast!Look like we're a man down this episode. Nemo is on the road again supporting the "work" load in the real world so we welcome Tim Holland, AKA: El Presidente back to the mic! We are pleased to have the Crew from Bases By Bill join us for sit down interview. We discuss the geneses behind the company, discover some new products and future, to include NATS this year. Tim gives the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better...
2023-07-083h 00ModelGeek's PodcastModel Geeks Episode 58, "How to keep the hobby a hobby".Welcome to Episode 58 of The ModelGeeks Podcast!In this episode we talk about How to keep the hobby just that a hobby. The geeks look at different ways to keep it a hobby by laughing at yourself and not sweating tiny 1/72 power levers for a Ki-84 Frank! The geeks also mention how having a friends text group is also a plus.We also discuss what we are In Work on, give you a brief of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. Once again, we have our...
2023-06-241h 54ModelGeek's PodcastModelGeeks Episode 57 "Oohhh Check Out That Sexy, Shiny Natural Metal Finish!"Welcome to Episode 57 of The ModelGeeks Podcast!In this episode we that super sexy natural metal finish and maybe a few technics on how to achieve it! WAIT!! We will also welcome old D-Ran back form the land down under!!We also discuss what we are In Work on, give you a brief of what’s new out there in kits, aftermarket, upcoming shows, as well as discuss some of the news with in the hobby. Not that there has been anything super news worthy out there after all, it has been kind of quiet.
2023-06-102h 47ModelGeek's PodcastModelGeeks Episode 56; "Modeling Inspiration”Welcome to Episode 56 of The ModelGeeks Podcast!In this episode we talk about what inspires us to build what we build, and all aspects of that thing that gets us to the bench to put thoughts into action, a vision into a creation, an idea into something that can be shared…or just to make something cool!We also discuss what we are In Work on, give you a brief of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. Once again, we have our special guest host in s...
2023-05-272h 56ModelGeek's PodcastMGPC Episode 55; "Your most dreaded part of a build"Welcome to Episode 55 of The ModelGeeks Podcast. The “Double Nickel” El Presidente joins us for the “Double Nickel” episode, filling in for D-ran who had some work commitments. El Presidente gives the listeners a 72-scale new kit run down for our 72 scale friends. Of course, we’ll also discuss what we are In Work on, give you a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. In the main topic, the geeks explain what is their most dreaded part of a build. The answers will surprise you!If you are...
2023-05-032h 08ModelGeek's PodcastModelGeeks Episode 54 "Better Late Than Never, Show Report NOVA Model Classic"Welcome to Episode 54 of The ModelGeeks Podcast.In this episode we discuss a little bit of everything! Main topic is a reap of the Northern Virginia Model Classic but when have we every stayed on topic?We will kick off our new segment, ModelGeeks ask; What The...BEEP? Have you seen that 'thing' on youtube or over in the forums that just make ask; What The "BEEP" are they thinking? We're going to start discussing these topics. Of course, we’ll also discuss what we are In Work on, give you a run-down of wha...
2023-04-231h 42ModelGeek's PodcastModelGeeks Episode 53 "Modeling Myths, Truths and WTH?"Welcome to Episode 53 of The ModelGeeks Podcast.In this episode we discuss the Myths, Truths and the what the F&%# did you say?We’ve all ll seen these videos on the You Tubes. It's time to discuss those hacks that are legit and those that aren't!This is going to drive, both great discussion as well as a little that an ddiscoinetend Of course, we’ll also discuss what we are In Work on, give you a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news aro...
2023-04-012h 33ModelGeek's PodcastModelGeeks Episode 52 "The Best Kits That Never Were"Welcome to Episode 52 of The ModelGeeks Podcast.In this episode we discuss the frustrations of hoping for a version of a nice kit subject, that simply never materializes. Read on…We’ve all built kits or seen kits hit the streets that we automatically think “Oh man, I hope they do the X version of that!” …only for that particular version of a kit to never materialize…for what seems to be unfathomable reasons! Right now my favorite headscratcher to this conundrum is the RF-8 Crusader. Building the Hasegawa F-8E at the moment, you c...
2023-03-182h 14ModelGeek's PodcastModelGeeks Episode 51; "The Old Dominion Open Re-Cap"Welcome to Episode 51 of The ModelGeeks Podcast.Join us as we re-cap our "First Show of the Season". We had the privilege of attending the "Old Dominion Open" hosted by IPMS Richmond, VA We will discuss what we are in work on, give you a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby and share a sea story or twoAs requested, here is the link to the "No-Name" portable airbrush from SprayGunner:No-Name Portable AirbrushWe would lik...
2023-03-051h 53ModelGeek's PodcastModelGeeks Episode 50; "The BIG 50! Thanks To You, The Listeners."Welcome to Episode 50 of The ModelGeeks Podcast.We would never have made it to this point without you the listeners. Many thanks you you all.Join us as we discuss what we are in work on, give you a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby and share a sea story or twoWe would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of...
2023-02-181h 54ModelGeek's PodcastModelGeeks Episode 49; "Intakes....Yep, They Suck!"Welcome to Episode 49 and Season THREE of The ModelGeeks Podcast.Did I say intakes suck? Nemo was quick to point out that they do, LITERALLY! In this episode we how it is we tackle the dreaded intake.We also have a great discussion on HeritageCon 2023 with Duncan Young and Allan Murell of IPMS Hamilton. You can get show information at: HeritageCon 2023 We will also touch on we are In work on, give you a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby and share...
2023-02-042h 33ModelGeek's PodcastModelGeeks Episode 48; "Happy New Year, Getting out 2023 Goals on!"Happy 2023 to you all! Welcome to Episode 48 and Season THREE of The ModelGeeks Podcast.In this episode we discuss our modeling plans and goals for the year ahead as well as a wrap up on our 2022 modeling accomplishments.Of course, we’ll also discuss what we are In Work on, give you a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. We would like to thank all the listeners for the continued support you have given the show. We hope to see you out a...
2023-01-211h 55ModelGeek's PodcastModelGeeks Episode 43; "ModelGeeks Most Wanted Kits"Welcome to Episode 43 of The ModelGeeks Podcast. Join us as we discuss what kits the Modelgeeks would want to see come out from the big name manufactures. Listen as the Modelgeeks kick it up a notch and say what three kits they would want to see produced if they were given three model wishes. The geeks kick it to the listeners and ask for their wants.As usual we will take you into the projects on our benches, what kits or accessories we’ve picked up as well.We’ll also give a run-down of what...
2022-10-151h 33ModelGeek's PodcastModelGeeks Episode 42 "Our Youth, Our Future.Welcome to Episode 42 of The ModelGeeks Podcast. Join us as we discuss the future of our hobby as it relates to the youth of today. What's drawing them away and how do we go about keeping their interest in the hobby. We are also very excited to bring to you a GREAT interview with one our very special friends and one of tomorrow leaders in the hobby; JJ O'Hara As usual we will take you into the projects on our benches, what kits or accessories we’ve picked up as well as wrap up PENNCON 22 in Carlisle PA.
2022-10-072h 39ModelGeek's PodcastModelGeeks Episode 41 "Modeling an Icon", Our Interview With Spencer Pollard"Welcome to Episode 41 of The ModelGeeks Podcast. We are please to have Spencer Pollard back to the show to discuss his new book series "Modeling An Icon" as well and other subjects like Monograms Century Series builds! We also get an exclusive look into some of Spencers future endeavors! As usual, we’ll discuss what’s going on around the hobby we love. The mojo is still burning strong and each of us will talk about what’s on our bench, and what kits or accessories we’ve picked up as well as our preparations for PENNCON 22 in Carlisle...
2022-09-092h 44ModelGeek's PodcastModelGeeks Episode 40; "Pushing through a problem/finding solutions"Welcome to Episode 40 of The ModelGeeks Podcast. In this episode we’ll discuss what’s going on around the hobby we love, and in our Main Topic we’ll cover overcoming difficulties in a build. Problem solving is one aspect of modeling I happen to enjoy, it gets you thinking ahead of the build, sharpens the ol’ noggin’, and gives you a feeling of accomplishment…well, if things go well that is. D-ran and Nemo just returned from Roanoke VA where they attended the Roanoke Valley IPMS Virginia Shootout on Saturday. They’ll give a recap of the show and le...
2022-08-261h 49ModelGeek's PodcastModelGeeks Episode 36; "Meet One of the OG Geeks, He's all the Rage!"Welcome to Episode 036 of the ModelGeeks Podcast. In this episode we’re going to have our friend and fellow Modelgeek Gabe “Rage” Pincelli hang out with us, and share his thoughts on the hobby, talk about real world flying and share his take on the hobby we all enjoy.Of course we’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby.Here is a link to the portable airbrush and compressor Nemo spoke of during the episode:Portable AirbrushThis is whe...
2022-06-182h 18ModelGeek's PodcastModelGeeks Episode 35; "Ah, It's Time To Get Serious! You Remember Your "Ah Ha" Moment?"Welcome to The ModelGeeks Podcast. Can you remember that "ah ha" moment; the moment you decided to get serious about the hobby? Join us as we take a little trip down memory lane and discuss when and why we decided to take the hobby seriously. We’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, as we as some of the other news from around the hobby. We would like to thank all of you listeners out there for the support you have given the show over the past year now and...
2022-06-051h 45ModelGeek's PodcastModelGeeks Episode 34; "Meet Our Good Friends at Detail & Scale"Welcome to The ModelGeeks Podcast. Join us as we welcome our very good friends, Bert Kinzey and Rock Roszak of Detail & Scale!!We’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. We would like to thank all the listeners for the support you have given the show over the past year now. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through soci...
2022-05-202h 35ModelGeek's PodcastModelGeeks Episode 33: Painting Natural Metal Finishes.Welcome to The ModelGeeks Podcast. This episode Scott leads the Geeks on a discussion about how do we paint natural metal finishes. We also have another guest host an original OG Mr. Justin Lentz. Justin gives the listeners a run down of who he is and what he builds. The geeks go over the entire process of laying down paint, weathering, and everyones favorite, putting decals on a natural metal finish. The geeks discuss some good emails from our listeners as well as a new "Bi-weekly" tip.We’ll also give a run-down of what’s new out the...
2022-05-072h 39ModelGeek's PodcastModelGeeks Episode 32; "SHOW SEASON IS UPON US!"Welcome to The ModelGeeks Podcast. Well, Show and Contest season is upon us! Alright we’ve discussed model contests before here on the Geeks but let’s talk shows/contests from the perspective of being “in show season”! We’re in the midst of planning our first show down here in Pax River (PAXCON23), and we’re learning really quickly how much work goes into planning and running a successful, i.e. FUN, model show and contest. Call it a contest, call it a show we’re there to see what’s on the tables. Let’s leave judging off t...
2022-04-222h 02ModelGeek's PodcastModelGeeks Episode 31; 3-D Printing and an Interview with Dave Roof".Welcome to The ModelGeeks Podcast. Listen in as the Geeks with special guest Tim "El Presidente" Holland filling in for D-ran discuss 3-D printing and its impact on the hobby. The Geeks also sit down with Dave Roof President and CEO of Flying Leathernecks Decals and get the history around the brand and where he thinks 3-D printed is going in the hobby. Of course we’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. We would like to thank all the listeners for the sup...
2022-04-083h 32ModelGeek's PodcastModelGeeks Episode 30; "Painting modern USN Tactical Paint Schemes"Welcome to The ModelGeeks Podcast. Join the Geeks as Nemo lays out how he gets that perfect TPS finish and Frilldo learns about the hole in the top of Mr. Hobby spray cans and how it is there to decant your paint. Nemo tells the listeners how he does his TPS on his models. Frank Blanton stops by and gives the Geeks an interview with a rundown on AMPS style judging. Of course we’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. We woul...
2022-03-262h 13ModelGeek's PodcastModelGeeks Episode 30; "How to get that worn Tactical Paint Scheme.Welcome to The ModelGeeks Podcast. Join the Geeks as Nemo lays out how he gets that perfect TPS finish and Frilldo learns about the hole in the top of Mr. Hobby spray cans and how it is there to decant your paint. Nemo tells the listeners how he does his TPS on his award winning models. Nemo also gives a quick rundown of the different Gunze andFS paint numbers for a TPS finish. Frank Blanton stops by and gives the Geeks an interview with a rundown on AMPS style judging and plugs the AMPS National Convention, April 7th to the 9t...
2022-03-252h 13ModelGeek's PodcastModelGeeks Episode 29; "Model Building, Mental Health and Stress, Can Slinging Paint Help; Hell Yeah!"Welcome to The ModelGeeks Podcast. We are very happy and privileged to have Sean King from Primed Model Works YouTube Channel and TJ Haller from the Plastic Posse Podcast join us as guest hosts for EP29. In this episode we do a little recap of the Old Dominion Open (ODO) held by IMPS Richmond. In our main topic we scratch the surface of scale modeling benefits as it relates to both stress and mental health. Of course we’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the...
2022-03-122h 49ModelGeek's PodcastModelGeeks Episode 28; "Can You Make Modeling Social, Hell Yeah You Can!"Welcome to Episode 028 of the ModelGeeks Podcast. In this episode we’re going to discuss hanging out with your modeling buddies and building away from the comfort of your bench…taking the hobby on the road! Do you have a group of friends who build? If so, make a plan to get together, do some model building, tell some tall tales, have a drink or two, and enjoy some camaraderie. Of course we’ll also give a run-down of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby. We would like...
2022-02-252h 30ModelGeek's PodcastModelGeeks Episode 27; The ModelGeeks Podcast One Year Anniversary Giveaway!!Welcome to Episode 027 of the ModelGeeks Podcast. In this episode we will announce the winners of The ModelGeeks Podcast One Year Anniversary Giveaway!! Make sure you listen closely as the winners are announced throughout the show!We would like to thank all of the listeners for the support you have giving the show over the past year and we look forward to the year to come. Hope to see you out and about as we hit some of the shows. If you can'e make it to the shows then you can still interact with us through social medi...
2022-02-122h 00ModelGeek's PodcastModelGeeks Episode 26; "References, Do You Even Need Them?? HECK YEAH YA DO!!"Welcome to Episode 026 of the ModelGeeks Podcast. In this episode and Nemo will lead us in as we discuss modeling references; is that something that you use? We do for sure, and we will discuss them in depth!!We also want to remind you that the one-year anniversary giveaway entry will close at 1800 EST tonight so listen up to the instructions on how to enter, TIME IS RUNNING OUT!! So, fire up your favorite listening device, head on over to the bench and START BUILDING! Also, if you're a real Model Geek you'll check ou...
2022-01-282h 20ModelGeek's PodcastModelGeeks Episode 25; "Is Self Competition Stealing Your Mojo?, Spencer Pollard of the Kit Box Joins us to Discuss!"Welcome to Episode 025 and the one year anniversary of the ModelGeeks Podcast. Spencer Pollard joins us in the special episode and we discuss one of his most current Kit Box Essay's"STOP COMPETING WITH YOURSELF…If you are making modelling decisions based on your need for affirmation, you might not be alone..."We also have an important announcement regarding our one year anniversary as well as some witty banter amongst the Geeks. So, fire up you favorite listening device, head on over to the bench and START BUILDING! Also, if you're a real...
2022-01-142h 52ModelGeek's PodcastModelGeeks Episode 24; "Color Us Crazy, Our Interview With Jeff Herne of Scale Colors"Welcome to Episode 024 of the ModelGeeks Podcast. Join us as we give a summary of what we are working on, touch on some news, answer the mail bag and give a quick tip/tool of the week. In this exciting episode we include an Interview with Jeff Herne of Scale Colors taken at the 2021 IPMS Nation Convention in Fabulous Las Vegas Nevada. We address a few listener emails and have some witty banter amongst the Geeks. We at the Geeks hope you all have a Merry Christmas and a Happy New Year! Hopefully Santa answers everyone’s model w...
2021-12-121h 54ModelGeek's PodcastModelGeeks Episode 23;"Happy Thanksgiving, this Stugs for you, our interview with Andy KlineWelcome to Episode 023 of the ModelGeeks Podcast. Join us as we give a summary of what we are working on. In this exciting episode we include an Interview with Andy Kline taken at the 2021 IPMS Nation Convention in Fabulous Las Vegas Nevada. We address a few listener emails and maybe share a sea story or two from Frilldo. We at the Geeks hope you all had a great Thanksgiving with family and friends.Fire up you favorite listening device, head on over to the bench and START BUILDING! Please check out the following show links:IP...
2021-11-281h 27ModelGeek's PodcastModelGeeks Episode 22; "Construction, Let's Get Back to Basics"Welcome to Episode 022 of the ModelGeeks Podcast. Join us as Nemo takes us deep into the discussion of basic construction. In this exciting episode we will discuss how we deal with basics as well as some of our favorite techniques. We get into some Geek news, address a few listener emails and maybe share a sea story or two.Fire up you favorite listening device, head on over to the bench and START BUILDING! Please check out the following show links:IPMS USA Events Page:https://ipmsusa.org/all-eventsIPMS Nationals 2022https...
2021-11-142h 33ModelGeek's PodcastModelGeeks Episode 21; Photography for Social Media, What Does it Take?Welcome to Episode 021 of the ModelGeeks Podcast. Can a discussion on photography go completely off the rails? Yes they can and I hope you'll come along for the journey as in this episode, we have two very special guests join us for this discussion. Not only do we discuss photography for social media but we take a little bit deeper dive into the world past that of the regular iPhone style photography. I want to thank John Bonanni and TJ Haller of the Plastic Posse Podcast (PPP) for joining us for this very informative episode.If you aren...
2021-10-312h 57ModelGeek's PodcastModelGeeks Episode 20; To Collinize or not to Collinize, that is the Question.Welcome to Episode 020 of the ModelGeeks Podcast. In this episode, Whitey poses the question, What was your worst kit, and have you ever Collinized "SMASHED THE HELL OUT OF' a kit before? Just about every modeler out there has had a kit that has tested your patience. Do us a favor, head on over to your bench turn up the volume and start building!! look forward Oh, and when you get a chance, we would LOVE to hear which kit really tested you and, if you have ever binned a kit, which one and why? Lets us know...
2021-10-171h 50ModelGeek's PodcastModelGeeks Episode 19; Is There a Clear Coat in Your Future?Welcome to Episode 019 of the ModelGeeks Podcast. In this exciting episode, Frilldo will lead us into one of the most controversial topics in scale modeling, Clear Coats; are they needed and if so what's your preference? Just about every modeler out there has an opinion on this. Do us a favor, head on over to your bench turn up the volume and start building!! Oh, when you get a chance, we would LOVE to hear your thoughts, please drop us a note at the email address below. Contact the ModelGeeks: contact@modelgeekspodcast.comIf yo...
2021-10-021h 55ModelGeek's PodcastModelGeeks Episode 18; Weathering and Judging, Should it be a Factor?Welcome to Episode 018 of the ModelGeeks Podcast. One more show in the books! We just got back from PennCon in Gettysburg PA. This event was put on by the Cetral PA IPMS and they did a GREAT job. In this episode, we’ll give a recap of the show as well as get into the discussion of weathering and how it plays into judging so, head on over to your bench turn up the volume, and start building!! Contact the ModelGeeks: contact@modelgeekspodcast.comIf you would like to support the Geeks please take a...
2021-09-172h 03ModelGeek's PodcastModelGeeks Episode 17; IPMS Nationals 2021, the Geeks Wrap UpWelcome to Episode 017 of the ModelGeeks Podcast. We are back home fresh from the IPMS Nationals in Las Vegas and in this episode, we’ll share our thoughts on the show as well as discuss some of the post-show negativity.We had the chance to record some interesting interviews while there and will be posting those over the next couple of weeks. So, until then, head on over to your bench turn up the volume, and start building!! Contact the ModelGeeks: contact@modelgeekspodcast.comIf you would like to support the Geeks...
2021-09-031h 28ModelGeek's PodcastModelGeeks Episode 16; Social Media; Help or Hurt....You DecideWelcome to Episode 016 of the ModelGeeks Podcast. Following up on Ep. 15 where we discussed the impending “Death” of the hobby. In this episode we discuss how Social Media has made a solitary; introverted sort of hobby more “social” than ever and the role it is playing in our hobby. Also, fresh off of MOSQUITOCON 29, we’ll share our thoughts on the show. As always, we’ll answer the mail, continue our local hobby shop shoutouts, sent to us by you, our listeners. So, make sure you send us an e-mail with your favorite mom and pop hobby sh...
2021-08-061h 57ModelGeek's PodcastModelGeeks Episode 15; Death of the Hobby, May it Rest in PeaceWelcome to Episode 015 of the ModelGeeks Podcast. Get ready as in this episode we discuss the long slow agonizing death of our hobby or the slow agonizing change of our hobby. Well, which is it? We will dive deeper into the subject. As always, we’ll answer the mail, continue our local hobby shop shoutouts, sent to us by you, our listeners. So, make sure you send us an e-mail with your favorite mom and pop hobby shop and help the hobby! Lastly, we will touch on some of the issues making the news. So, head on over to...
2021-07-231h 56ModelGeek's PodcastModelGeeks Episode 14; Office Space, Cockpits; How to Paint 'emWelcome to Episode 014 of the ModelGeeks Podcast. In this "exciting" episode we dive headfirst into the wonderful world of office rehab, yup time to talk about cockpits! We discuss a few different ways that we tackle the job of slinging paint in the cockpit as well as a few other techniques. As always, we’ll answer the mail, and in this episode that leads to some spirited conversation on model show etiquette. We continue our local hobby shop shoutouts, sent to us by you, our listeners. So, make sure you send us an e-mail with your favorite mom and...
2021-07-091h 56ModelGeek's PodcastModelGeeks Episode 13; Cleah Pahts”Welcome to Episode 013 of the ModelGeeks Podcast. In this "exciting" episode we discuss the issue of AMPS vrs IPMS rules and cover the many different issues when preparing and tackling clear parts. Yes, there may be a mention or two of the "future" word so don't crucify us! As always, we’ll answer the mail and do our local hobby shop shoutouts that are sent into us by you, our listeners. So, make sure you send us an e-mail with your favorite mom and pop hobby shop and help the hobby! Lastly, we will touch on some of iss...
2021-06-262h 12ModelGeek's PodcastModelGeeks Episode 12; Decals, Deckles or DahCals?”Welcome to Episode 012 of the ModelGeeks Podcast. Just coming off of our new segment, “Bench Time with the Geeks” and our interview with Geoff Martin of Furball Aero-design is a perfect time to discuss deckles and our method of applying. Everything from clear coats versus polishing to different types of setting solutions and silvering and how to fix it, Whitey will show us the way! As always, we’ll answer the mail and do our local hobby shop shoutouts that are sent into us by you, our listeners. So, make sure you send us an e-mail with your favorite mom and po...
2021-06-121h 57ModelGeek's PodcastModelGeeks Episode 11; “Bench Time with Geoff Martin of Furball Aero-design”Welcome to Episode 011 of the ModelGeeks Podcast. In this episode Frilldo introduces you to the new segment that we call “Bench Time with the Geeks” and welcomes Geoff Martin of Furball Aero-design was the inaugural guest on the ModelGeeks podcast. Geoff gives us a glimpse into what it takes to produce world class decal sheets. He touches in how he first got into the aftermarket decal biz and what it's like to collaborate with some of the top names in the business. We Geeks get to inquire about future subjects and Geoff drops us all a sweet little nugget of news...
2021-05-281h 58ModelGeek's PodcastModelGeeks Episode 10; Who Needs Swag When You’ve Got MOJO?Welcome to Episode 010 of the ModelGeeeks Podcast. Have ya lost your Mojo? Are ya having a hard time finding it or wondering where it went and why? In this episode Nemo guides our discussion into the world of the ever elusive Mojo! As usual we’ll answer the mail and cover your favorite local hobby shops. That said, make sure you send us an e-mail with your favorite mom and pop hobby shop and help the hobby! We will also touch on some of the issues making the news. So, head on over to your bench, turn up the volume a...
2021-05-142h 15ModelGeek's PodcastModelGeeks Episode 9; "Getting Ready For The Big Show"Welcome to Episode 009 of the ModelGeeeks Podcast. With model shows starting to make a comeback, Darrin guides into the different aspects of the show. We cover a wide array of topics from building strictly for shows to when it is and when it may not be the proper time to offer up critique. We’ll answer the mail with our new local hobby shop shoutouts sent into us by you, our listeners. That said, make sure you send us an e-mail with your favorite mom and pop hobby shop and help the hobby! We will also touch on some of iss...
2021-04-302h 19ModelGeek's PodcastModelGeeks Episode 8; “The Stash Monster, Feed Me Seymour, Feed Me!”Welcome to Episode 008 of the ModelGeeeks Podcast. In this episode Whitey takes the helm and guides us as we dive the subject of the “Stash Monster”. How does it start, what’s your favorite kit, how many do you have; all questions that we will answer in this episode. We’ll answer the mail with our new local hobby shop shoutouts sent into us by you, our listeners. That said, make sure you send us an e-mail with your favorite mom and pop hobby shop and help the hobby! We will also touch on some of issues making the news. So...
2021-04-162h 20ModelGeek's PodcastModelGeeks Episode 7; “Love ‘em or hate ‘em: Raised Panel Lines”Support the Geeks! Welcome to Episode 007 of the ModelGeeeks Podcast. In this episode Frilldo leads us into the world of raised panel lines. How do you restore lost raised panel lines after sanding? Do raised panel lines turn you off from buying a model? We will share our opinions as well as discuss how we, the geeks restore lost panel lines. We’ll answer the mail, introduce you to our new local hobby shop shoutouts, and touch on some of issues making the news. So, head on over to your bench turn up the volume and sta...
2021-04-022h 08ModelGeek's PodcastModelGeeks Episode 6; To Pre-Shade or not to Pre-ShadeSupport the ModelGeeks. https://paypal.me/modelgeekspodcast?locale.x=en_USWelcome to Episode 006 of the ModelGeeeks Podcast. In this episode Scott leads us into the dark shadows to discuss the great Pre-Shading debate. To pre-shade or not to pre-shade, that is the question. We will share our opinions as well as discuss post shading. We’ll answer the mail and touch on some of issues making the news. So, head on over to your bench turn up the volume and start building!! We are very fortunate to be able join the scale mo...
2021-03-191h 45ModelGeek's PodcastModelGeeks Episode 5; “Your Finish, is it Realistic or Artistic?”Support the ModelGeeks. https://paypal.me/modelgeekspodcast?locale.x=en_USWelcome to Episode 005 of the ModelGeeeks Podcast. In this episode Darrin, Nemo, Frilldo and Whitey discuss finishing techniques and the difference between a realistic approach and an artistic approach. We discuss the differences between the two, and briefly discuss critique. We’ll answer the mail and touch on some of issues making the news. So, head on over to your bench turn up the volume and start building!!Contact the ModelGeeks: contact@modelgeekspodcast.com We are very fortunate to be able...
2021-03-052h 15ModelGeek's PodcastModelGeeks Episode 4; “Back to the Future!! Jumping Back into the Hobby”Support the ModelGeeks. https://paypal.me/modelgeekspodcast?locale.x=en_US“Back to the Future!! Jumping Back into the Hobby”Welcome to Episode 004 of the ModelGeeeks Podcast. In this episode Whitey, Darrin, Nemo, and Frilldo discuss breaking back into the hobby. We dive into basic tools and things that you’ll need consider when coming back after a long hiatus. We’ll answer the mail and touch on some of issues making the news. So, head on over to your bench turn up the volume and start building!!Drop us a note, we would...
2021-02-191h 53ModelGeek's PodcastModelGeeks Episode 3; “What Goes into Your Build Process?”Support the ModelGeeks. https://paypal.me/modelgeekspodcast?locale.x=en_US “What Goes into Your Build Process?” Welcome to Episode 003 of the ModelGeeeks Podcast. In this episode Nemo, Darrin, Frildo and Whitey dive into the build process. We’ll discuss our own build process and talk a little bit about the things we take into consideration. We’ll answer the mail and touch on some of issues making the news. So, head on over to your bench turn up the volume and start building!!Contact the ModelGeeks: contact@model...
2021-02-051h 29ModelGeek's PodcastModelGeeks Episode 2; “I Love the Smell of Gunze in the Morning”Support the ModelGeeks. https://paypal.me/modelgeekspodcast?locale.x=en_US Welcome to Episode 002 of the ModelGeeeks Podcast. In this episode Nemo, Darrin, Frildo and Whitey dive into paint, paint and more paint. We’ll discuss some dry brushing techniques and get into our favorite paint types and manufactures. We’ll answer the mail and touch on some of issues making the news. So, head on over to your bench turn up the volume and start building!!Let us know what you think, we love hearing from you the listeners. If you like the episod...
2021-01-221h 50ModelGeek's PodcastModelGeeks Episode 1; Who the Heck Are the ModelGeeks, What Do They Build and Why?Support the ModelGeeks. https://paypal.me/modelgeekspodcast?locale.x=en_US Who the Heck Are the ModelGeeks, What Do They Build and Why?Welcome to Episode 001! Darrin Cook, Scott “Nemo” Samo, Andrew “Frildo” Frill and Andrew “Whitey” White make their introductions and give you, the listeners a chance to know more about who they are. We are very fortunate to be able join the scale modeling community. There other GREAT podcast out there out and hopefully someday well earn our wings and be able to keep up with those guys! Please...
2021-01-081h 31ModelGeek's PodcastThe ModelGeeks Podcast (Trailer)Here's a quick welcome / introduction trailer to tell you what were all about. We look forward to getting to know you the listeners and hope that you will enjoy our future content. Please let us know what ya think!! Contact@modelgeekspodcast.comSupport the showModel Geeks Podcast
2020-12-2302 min